Panasonic Projector Pt D10000e Operating Instructions

							Information
ENGLISH – 121
Index
A
Accessories ...................................... 10
Adjusting Brightness ......................... 50
Adjusting Colour ............................... 50
Adjusting colour matching .......... 67–69
Adjusting Contrast ............................ 50
Adjusting the aspect ratio ................. 57
Adjusting the clamp position ............. 62
Adjusting the colour temperature...... 51
Adjusting the feet .............................. 20
Adjusting the input resolution ........... 61
Adjusting the zoom ratio ................... 58
Adjusting Tint .................................... 51
Air filter cleaning ......................... 80–81
Altitude.............................................. 76
Automatic adjustment ................. 44, 70
Auto signal ........................................ 70
AUX DVI EDID.................................. 72
B
Back Colour ...................................... 71
Basic operations on menu screen .... 48
Before asking for service ................ 113
Blanking adjustment ......................... 61
C
Changing the password .................. 100
Changing the text ........................... 101
Cleaning and replacement of 
air filter .................................... 108–109
Clock phase adjustment ................... 58
Compatible RGB/YPBPR/DVI-D Signals ... 118
Connecting the power cord............... 34
Connecting with personal computers ..... 26
Connecting with VIDEO devices....... 25
D
Digital cinema reality ........................ 60
Direction ........................................... 77
DVI-D input module .......................... 32
DVI EDID .......................................... 71
Dynamic iris setting .......................... 53
E
Edge blending adjustment .......... 62–64
Effective range of remote control 
operation........................................... 17
F
Frame delay...................................... 64
G
Gamma setting ................................. 52
H
HD/SD-SDI input module.................. 31
How to adjust the lens ................ 37–39
How to install and remove 
the projection lens ............................ 33
I
Indication of monitor lamp .............. 107
Installation dimensions diagram ..... 120
Installation Setting ............................ 76
Installing the input module .......... 27–28
K
Keystone distortion correction .......... 59
L
Lamp relay ........................................ 79
Lamp select ...................................... 78
Lamp unit replacement ................... 111
Large Screen Correction .................. 69
List of P IN P................................... 119
M
Main menu ........................................ 46
Maintenance ..................................... 11
N
Network connections ........................ 86
Network function ......................... 84–97
Noise reduction setting ..................... 53
Notes when installing 
the ceiling mount bracket................ 112
O
On-screen display function ............... 43
OSD memory .................................... 74
Output resolution .............................. 77
Outside dimensions ........................ 120
P
P IN P ......................................... 72–73
Position of on-screen indications ...... 74
Power indicator lamp ........................ 34
Powering off the projector................. 36
Powering up the projector................. 35
Projection scheme ............................ 20
R
Raster position.................................. 65
Registered signals ...................... 40–41
Registering the picture mode 
settings as presettings ...................... 54
Remote 2 terminal .......................... 106
RS-232C setting ............................... 79
S
SD-SDI input module ........................ 30
Self-diagnosis display ............. 114–115
Serial terminals ....................... 102–105
Setting a projector ID ........................ 75
Setting FUNC1 ................................. 73
Setting projector ID number to 
remote control................................... 18
Setting the date and time.................. 81
Setting the password ........................ 99
Setting the text................................ 100
Sharpness setting ............................. 52
Shift adjustment ................................ 56
Specifications ......................... 116–117
sRGB ................................................ 55
Startup logo ...................................... 82
Status function .................................. 43
Sub memory ............................... 41–42
Sub menu ................................... 46–47
Switching the input signal ................. 43
Switching the picture mode .............. 49
System format .................................. 54
System information ........................... 80
T
Test pattern ...................................... 83
U
Using the PJLink™ protocol ............. 98
Using the SHUTTER function ........... 43
W
Wired remote control ........................ 18
Be sure to read the “IMPORTANT SAFETY NOTICE” and 
the “Precautions with regard to safety”. (pp. 4-9) 
						

							Trademark Acknowledgement
Digital Light Processing, DLP, and DLP® CHIP are registered trademarks of the Texas Instruments.
VGA and XGA are trademarks of International Business Machines Corporation.
S-VGA is a registered trademark of the Video Electronics Standards Association.
“Microsoft Windows” is a registered trademark of the Microsoft Corporation (U.S.A.) in the U.S. and other 
countries.
“Netscape” and “Netscape Navigator” are registered trademarks of the Netscape Communications Corporation 
in the U.S. and other countries.
HDMI, the HDMI logo and High-Definition Multimedia Interface are the trademarks or registered trademarks of 
HDMI Licensing LLC.
Patent No. 5,717,422
All other trademarks are the property of the various trademark owners. •
•
•
•
•
•
•
•
Note:
Purchase of this equipment includes the rights to use this software (the built-in microcomputer and information 
recorded on ROMs) but does not grant copyrights. Do not reverse engineer, change or modify the software.
The guarantee will not be valid for any malfunctions caused by such actions.
Information for Users on Collection and Disposal of Old Equipment and used Batteries
These symbols on the products, packaging, and/or accompanying documents mean that used 
electrical and electronic products and batteries should not be mixed with general household waste.
For proper treatment, recovery and recycling of old products and used batteries, please take them to 
applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC 
and 2006/66/EC.
By disposing of these products and batteries correctly, you will help to save valuable resources and 
prevent any potential negative effects on human health and the environment which could otherwise 
arise from inappropriate waste handling.
For more information about collection and recycling of old products and batteries, please contact your 
local municipality, your waste disposal service or the point of sale where you purchased the items.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.
For business users in the European Union
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for 
further information.
Information on Disposal in other Countries outside the European Union
These symbols are only valid in the European Union. If you wish to discard these items, please contact
your local authorities or dealer and ask for the correct method of disposal.
Note for the battery symbol (bottom two symbol examples):
This symbol might be used in combination with a chemical symbol. In this case it complies with the 
requirement set by the Directive for the chemical involved.