Panasonic Projector Pt D10000e Operating Instructions
Here you can view all the pages of manual Panasonic Projector Pt D10000e Operating Instructions. The Panasonic manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 1
TQBJ 0209-4 Operating Instructions DLP® Based Projector Commercial Use PT-D10000E PT-DW10000E Read these instructions completely before operating this unit. Models No.
Page 2
2 – ENGLISH Dear Panasonic Customer: This instruction booklet provides all the necessary operating information that you might require. We hope it will help you to get the most performance out of your new product, and that you will be pleased with your Panasonic DLP® based projector. The serial number of your product may be found on its back. You should note it in the space provided below and retain this booklet in case service is required. Model number: PT-D10000E/PT-DW10000E Serial number:
Page 3
ENGLISH – 3 Getting StartedGetting Started Basic Operation Special Features Information Contents IMPORTANT SAFETY NOTICE ............................................................................................. 4 Precautions with regard to safety ........................................................................................ 6 Before Using ........................................................................................................................ 10 Location and function of each...
Page 4
4 – ENGLISH IMPORTANT SAFETY NOTICE WARNING: THIS APPARATUS MUST BE EARTHED. WARNING: To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain or moisture. Machine Noise Information Ordinance 3. GSGV, January 18 1991: The sound pressure level at the operator position is equal or less than 70 dB (A) according to ISO 7779. WARNING: 1) Remove the plug from the wall outlet when this unit is not in use for a prolonged period of time. 2) To prevent electric shock,...
Page 5
Getting Started ENGLISH – 5 FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY. This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 13 amp fuse is fitted in this plug. Should the fuse need to be replaced, please ensure that the replacement fuse has a rating of 13 amps and that it is approved by ASTA or BSl to BS1362. Check for the ASTA mark a or the BSl mark ` on the body of the fuse. If the plug contains a removable fuse cover, you must ensure that...
Page 6
6 – ENGLISH Precautions with regard to safety WARNING If a problem occurs (such as no image) or if you notice smoke or a strange smell coming from the projector, turn off the power and disconnect the power cord from the wall outlet. • Do not continue to use the projector in such cases, otherwise fire or electric shocks could result. • Check that no more smoke is coming out, and then contact an Authorized Service Centre for repairs. • Do not attempt to repair the projector yourself, as this can be...
Page 7
Getting Started ENGLISH – 7 Do not place the projector on top of surfaces which are unstable. • If the projector is placed on top of a surface which is sloped or unstable, it may fall down or tip over, and injury or damage could result. Do not place the projector into water or let it become wet. • Failure to observe this may result in fire or electric shocks. Do not disassemble the lamp unit. • If the lamp section breaks, it may cause injury. Do not place liquid containers on top of the projector. •...
Page 8
8 – ENGLISH CAUTION Precautions with regard to safety (continued) Do not set up the projector in humid or dusty places or in places where the projector may come into contact with smoke or steam. • Using the projector under such conditions may result in fire or electric shocks. When disconnecting the power cord, hold the plug, not the cord. • If the power cord itself is pulled, the cord will become damaged, and fire, short-circuits or serious electric shocks may result. Always disconnect all cables...
Page 9
Getting Started ENGLISH – 9 Ask an Authorized Service Centre to clean inside the projector at least once a year. • If dust is left to build up inside the projector without being cleaned out, it can result in fire or problems with operation. • It is a good idea to clean the inside of the projector before the season for humid weather arrives. Ask your nearest Authorized Service Centre to clean the projector when required. Please discuss with the Authorized Service Centre regarding cleaning costs. Do...
Page 10
10 – ENGLISH Accessories Check that all of the accessories shown below have been included with your projector. Remote Control [N2QAYB000076 × 1]Batteries for Remote Control (AA)Power cord Drop-prevention bracket For U.K. [K2CT3YY00006 × 1]For Continental [K2CM3YY00004 × 1]Eye bolt [THEA172J × 4]Wire [TTRA0144 × 4] Caution when moving the projector The projection lens is susceptible to vibrations and impacts. Be sure to always remove the lens during transport. Cautions regarding setup Be sure to...