Panasonic Projector PT-CX300U User Manual

							Appendices
ENGLISH - 71
Appendix
ModeDisplay 
resolution *1 
(dots) Scanning 
frequency Dot clock 
frequency  (MHz) Format Plug and play *
3
H (kHz)
V (Hz) COMPUTER 1/ 
COMPUTER 2 HDMI
SXGA 1 280 x 1 024 63.98
60.0 108.00 R/H - -
76.97 72.0 133.00 R/H - -
79.98 75.0 135.00 R/H o o
1366x768 1 366 x 76847.7259.8 84.75 R/H - -
SXGA+ 1 400 x 1 050 65.3260.0 121.75 R/H - -
WXGA+ 1 440 x 90055.9459.9 106.50 R/H - -
UXGA 1 600 x 1 200 75.0060.0 162.00 R/H o o
WSXGA+ 1 680 x 1 05065.2960.0 146.25 R/H o*
4o*4
*1: “i” added to the resolution value indicates an interlaced signal.
*2: HDMI signal of 480i and 576i is only supported by 27MHz Dot clock signal.
*3:   Where marked "o" signals indicates in Plug and Play is compatible with EDID of projector . Unmarked signals in Plug and 
Play may also be compliant if input terminals are written in the format \
list. Where Plug and Play is unmarked and nothing is 
written in the format list, difficulties in projecting image may occur even when computer and projector appear to have same 
resolution.
*4:  For PT-CW330U and PT-CW240U.
3D compatible signals
3D compatible video signals of this projector are shown in the table bel\
ow.
Mode3D signals Display 
resolution *1 
(dots) Frame 
Packing Side-by-Side 
(Half) Top and 
Bottom Frame
Sequential Field
Sequential
HDMI 750 (720)/60p
1 280 x 720o
-o- -
750 (720)/50p 1 280 x 720o
-o- -
1125 (1080)/60i  1 920 x 1 080i -
o-- -
1125 (1080)/50i 1 920 x 1 080i -
o-- -
1125 (1080)/24p 1 920 x 1 080 o
-o- -
VGA@120 Hz 640 x 480-
--o -
SVGA@120 Hz 800 x 600-
--o -
XGA@120 Hz 1 024 x 768 -
--o -
COMPUTER 1/  COMPUTER 2 VGA@120 Hz
640 x 480-
--o -
SVGA@120 Hz 800 x 600-
--o -
XGA@120 Hz 1 024 x 768 -
--o -
Video/S-Video NTSC------o o
Video and S-Video support DVD software (HQFS) that is recorded in Field sequential.
*1: “i” added to the resolution value indicates an interlaced signal.
Note
The number of display dots is 1 280 x 800 for the PT-CW330U, PT-CW240U and 1 024 x 768 for the PT-CX300U.   z A signal with a different resolution will be projected after converting the resolution to m\
atch the projector display.
When interlaced signals are connected, flicker may occur on the projected image.
 zEven the above signals exist, some image signals that recorded in specia\
l method may not be displayed.
 zThe  operation may not optimize the image position or the resolution, depending on the input signal format or 
 zthe image contents. In this case, switch to a different image and execute  again. 
						

							Specifications
72 - ENGLISH
Appendix
Specifications
Measurement, measuring conditions and method of notation all comply with ISO21118 international 
*1 : 
standards.
For details of video signals that can be projected using this projector , refer to “List of compatible signals”. 
*
2 : 
(Æpages 70-71)
The value of native aspect ratio (16:10 for PT-CW330U and PT-CW240U; 4:3 for PT-CX300U).
*
3 : 
Model No.PT-CW330U PT-CX300U PT-CW240U
Power supply AC 100-240 V  50/60Hz
Power consumption 100 V - 240 V 3.6A-1.5 A, 340 W
100 V - 240 V 3.2 A-1.3 A,
 
310 W
Standby power consumption
0.5 W   When [LAN (Standby)]/[VGA Out (Standby)]/[In Standby Mode (Audio)] are all  z
set to [Off].
6.0 W  When one or more among [LAN (Standby)]/[VGA Out (Standby)]/[In Standby  z
Mode (Audio)] is/are set to [On].
DLP panel Panel  
size
0.65
(Aspect ratio 16:10) 0.55
(Aspect ratio 4:3) 0.65
(Aspect ratio 16:10)
Display 
method DLP chip
Pixels 1 024 000
1 280 x 800 786 432
1 024 x 768 1 024 000
1 280 x 800
Lens Fixed focus, Manual focus 
F 2.6, f = -5.27mm
Luminous lamp 280 W UHM lamp240 W UHM lamp
Light output *
13 100 Lumens 2 600 Lumens
Contrast ratio*
18 000 : 1 (all white / all black)
For RGB signal input, set [Color Mode] to [Dynamic] and [Lamp Power Mode] to [Normal]
Applicable 
scanning 
frequency *
2
for Video 
signal 
(including 
S-video) Horizontal 15.75 kHz / 15.63 kHz, Vertical 50 Hz / 60 Hz
for RGB 
signal Horizontal 15 kHz to 100 kHz, Vertical 24 Hz to 120 Hz
Dot clock frequency: 162 MHz or less
for YP
BPR 
signal
[525i(480i)]    Horizontal 15.75 kHz, Vertical 60 Hz
[625i(576i)]   Horizontal 15.63 kHz, Vertical 50 Hz
[525p(480p)]   Horizontal 31.50 kHz, Vertical 60 Hz
[625p(576p)]   Horizontal 31.25 kHz, Vertical 50 Hz
[750(720)/60p]   Horizontal 45.00 kHz, Vertical 60 Hz
[750(720)/50p]   Horizontal 37.50 kHz, Vertical 50 Hz
[1125(1080)/60i]   Horizontal 33.75 kHz, Vertical 60 Hz
[1125(1080)/50i]   Horizontal 28.13 kHz, Vertical 50 Hz
[1125(1080)/24p]   Horizontal 27.00 kHz, Vertical 24 Hz
[1125(1080)/60p]   Horizontal 67.50 kHz, Vertical 60 Hz
[1125(1080)/50p]   Horizontal 56.25 kHz, Vertical 50 Hz
for HDMI 
signal525i(480i), 625i(576i), 525p(480p), 625p(576p), 750(720)/60p, 750(720)/50p, 
1125(1080)/60i, 1125(1080)/50i, 1125(1080)/24p, 1125(1080)/60p, 1125(1080)/50p
Displayable resolution: VGA to WUXGA (non-interlace) z
Dot clock frequency: 25 MHz ~ 162 MHz z
Color system 7 (NTSC, NTSC4.43, PAL, PAL-N, PAL-M, SECAM, PAL60)
Projection size 70"-100" *
360"-90" *370"-100" *3
Screen aspect ratio 16:104:316:10
Projection scheme Front / Rear / Mount on Ceiling / Floor (Menu setting system)
Speaker 1 (7 cm x 3 cm)
Maximum usable volume 
output 10 W 
						

							Specifications
ENGLISH - 73
Appendix
This is an average value. It may differ depending on individual product.*4 : 
Measurement, measuring conditions and method of notation all comply with ISO21118 international 
*5 : 
standards. 
The part numbers of accessories and separately sold components are subje\
ct to change without notice.
 z
Model No.PT-CW330U PT-CX300U PT-CW240U
Terminals
COMPUTER 1 
IN/
COMPUTER 2 
IN2 sets, high-density D-Sub 15p (female)
[RGB signal] 
     0.7 V [p-p] 75 Ω (When G-SYNC: 1.0 V [p-p] 75 Ω)
     HD/SYNC TTL high impedance, automatic positive/negative polarity compatible
     VD TTL high impedance, automatic positive/negative polarity compatible
     SYNC/HD and VD are not compliant with 3 value composite SYNC
[YP
BPR signal]  
     Y: 1.0 V [p-p] including synchronization signal, P
BPR: 0.7 V [p-p] 75 Ω
MONITOR OUT 1 set, high-density D-Sub 15p (female)
[RGB signal] 
     0.7 V [p-p] 75 Ω (When G-SYNC: 1.0 V [p-p] 75 Ω)
     HD/SYNC TTL high impedance
     VD TTL high impedance
[YP
BPR signal]  
     Y: 1.0 V [p-p] including synchronization signal, P
BPR: 0.7 V [p-p] 75 Ω
VIDEO  1 (Pin jack  1.0 V [p-p] 75 Ω)
S-VIDEO  1 Mini DIN 4 pin, Y 1.0 V [p-p], C 0.286 V [p-p] 75 Ω
HDMI  1 (HDMI 19 pin, HDCP and Deep color compatible)
AUDIO  2 (M3 stereo mini jack, 0.5 V [rms], input impedance 22 kΩ and more)
2 (Pin jack x 2 (L-R), 0.5 V [rms], input impedance 22 kΩ and more)
VARIABLE 
AUDIO OUT 1 (M3 stereo mini jack, stereo monitor output compatible,
0 V [rms] to 2.0 V [rms] variable, output impedance 2.2 kΩ and less)
SERIAL IN 1 (D-sub 9 pin, RS-232C compliant, for computer control use)
LAN 1 (For RJ-45 network connection: PJLink (class 1) compatible)
MINI USB 1 (For upgrading firmware)
Power cable length 3 m (118.1 ")
Cabinet Molded plastic
Dimensions Width: 357 mm (14.06")
Height: 250.4 mm (9.86") (when adjustable feet shortened) Depth: 367 mm (14.45")
Weight Approx.7.7 k
] 
(16.98 lbs.) *
4Approx.7.5 k
] 
(16.53 lbs.) *4
Noise level  *5When set to [Normal] in [Lamp power mode]: 37 dB
When set to [ECO] in [Lamp power mode]: 33 dB
Operating environment Operating environment temperature:
5 °C to 40 °C (For 0 - 2 500 ft), (Elevation: below approx. 750 m); 
5 °C to 35 °C (For 2 500 - 5 000 ft), (Elevation: approx. 750 m - approx.1 500 m); 
5 °C to 30 °C (For 5 000 - 10 000 ft), (Elevation: approx. 1 500 m - approx.3 000 m); 
Operating environment humidity: 20 % to 80 % (no condensation)
Remote 
control Power supply
DC 3 V (Lithium coin battery)
Operating 
range Approx. 8 m (26.25 ft) (when operated directly in front of signal receiver)
Weight 23.0 
] (0.811 ozs.) (including battery)
Dimensions Width : 40.6 mm (1.60"), Length : 86.5 mm (3.41"), Height : 7.2 mm (0.28") 
						

							Ceiling mount bracket safeguards
74 - ENGLISH
Appendix
Dimensions

367 (14.45)357 (14.06)
133.7 (5.27) 241 (9.49)
267.6 (10.53)
231 (9.10) 186.7 (7.35)
163 (6.42) 98 (3.86)
334.7 (13.16)
(From reflection mirror
 to cabinet rear edge)
(From mirror cover
 to cabinet rear edge) 331.6 (13.01)
112.5 (4.43)112.5 (4.43) 64.9 (2.55)
38.8 (1.53)
250.4 (9.76)
17 (0.67)
19.4 (0.76)
Actual dimension may differ by product.: 
Ceiling mount bracket safeguards
Installation work of the ceiling mount bracket should only be carried by a qualified technician. z
Even if it is during guaranteed period, the manufacturer is not responsible for any hazard or damage caused  z
by using a ceiling mount bracket which is not purchased from an authorized distributors, or environmental 
conditions.
Remove an unused ceiling mount bracket promptly.
 z
Ensure to use a torque driver and do not use an electrical screwdriver or an impact screwdriver . z
For details, see the work instruction manual packed together with the ceiling mount bracket. z
The model Nos. of the accessories and the parts sold separately are subj\
ect to change without notice. z
Make sure the screws on the ceiling mount kit cannot touch the metal parts materials (metallic lath, wire or  z
board) in the ceiling board. Otherwise it may result in fire hazard.
Model No. of ceiling mount bracket: 
ET-PKV100H (for high ceilings)
ET-PKV100S (for low ceilings)
Model No. of projector mount base: 
ET-PKC200B
Model No. of Wall Mount Bracket:
ET-PKC200W 
M4 x 0.78 mm (0.32")
Torque:1.2 ± 0.1 N · m
Bottom view 
						

							ENGLISH - 75
Appendix
Index
Numbers
3D ...................................................47
3D compatible signals
  ....................71
3D Format....................................... 48
3D Invert
  .........................................47
1080p@24
  ......................................48
A
About viewing 3D images  ...............34
About Your Projector .......................17
Accessories
  ....................................16
Adjusting Projection Image Size
  .....23
Adjusting the Projector's Focus
  ......26
Adjusting the Projector's Height
  .....26
Aspect Ratio
  ...................................40
Auto Power Off (Min)
  ......................45
B
Before cleaning/replacing the unit  ..57
Before connecting to the projector ..27
Brightness ....................................... 38
C
Cautions on use.............................. 15
Cautions when installing
  .................13
Cautions when transporting
  ............13
Ceiling Mount .................................. 41
Ceiling mount bracket safeguards
  ..74
Clock............................................... 40
Closed Caption
  ...............................42
Color Mode
  .....................................38
Color Space
  ....................................39
Color Temp
  .....................................39
Computer operation via network .....52
Connecting example:   
AV equipment
  .............................29
Connecting example: Computers
  ...28
Connecting terminals
  ......................20
Connecting the power cord .............30
Connections .................................... 27
Connect to Network
  ........................51
Contrast
  ..........................................38
Control panel
  ..................................19
Crestron RoomView Control Tool
  ...55
D
DHCP  .............................................49
Digital Zoom
  ...................................41
Dimensions
  .....................................74
Disposal
  ..........................................14
DNS
  ................................................49
Dust Filter Reminder....................... 46
Dynamic Black
  ................................46
G
Gamma  ...........................................39
Gateway
  .........................................49
H
High Altitude ...................................46
How to adjust the state of   the image
 ....................................33
H Position
  .......................................40
Hue
  .................................................39
I
ID numbers .....................................21
Image select
  ...................................42
Information ...................................... 46
Input ................................................ 45
Installing and Removing battery
  .....21
In standby mode
  .............................44
IP Address
  ......................................49
L
Lamp Settings ................................. 45
Lamp unit
  ........................................60
Language ........................................ 42
LAN (Standby)
  ................................42
List of compatible signals
  ...............70
M
Maintenance/replacement ..............57
Menu Location
  ................................42
Menu Navigation ............................. 35
Menu Tree
  ......................................36
Mute................................................ 44
N
Notes on the replacement of  
the lamp unit
  ...............................60
O
ON(G)/STANDBY(R) indicator ........31
On-screen Display Menus
  ..............35
Optional accessories
  ......................16
Other terminals
  ...............................68
P
Parts for ceiling or wall mount 
(Optional)
 ....................................22
Phase
  .............................................40
PJLink protocol
  ...............................69
Powering Off the Projector
  .............32
Powering On the Projector
  .............32
Precautions for Use
  ........................13
Projection distance for   
PT-CW330U, PT-CW240U
  .........24
Projection distance for   
PT-CX300U
  .................................25
Projection method ...........................22
Projector body
  ................................18
R
Read this first! ................................... 2
Real
  ................................................38
Remote control
  ...............................17
Remote ID
  ......................................43
Replacing the Lamp unit
  .................61
Replacing the unit
  ...........................59
Reset
  ........................................43, 50
S
Safety Precautions  .........................48
Safety Precautions Message
  ..........48
Saturation
  .......................................39
Security........................................... 14
Selecting the input signal ................33
Serial terminal................................. 65
Setting the ID number .....................21Setting up
 
.......................................22
Sharpness
  ......................................39
Specifications
  .................................72
Startup Logo
  ...................................43
Store
  ...............................................50
Subnet Mask ................................... 49
T
Test Pattern ....................................43
Troubleshooting
  ..............................62
V
VGA Out (Standby) .........................42
Viewing 3D Images
  .........................34
V Keystone
  .....................................41
Volume ............................................ 44
V Position
  .......................................41
W
Wall color ........................................38
Web Management
  ..........................52
When to replace the lamp unit
  ........60 
						

							Information on Disposal in other Countries outside the European Union
These symbols are only valid in the European Union.
If you wish to discard this product, please contact your local authoriti\
es or dealer and ask for 
the correct method of disposal.
W0113GC1083 -ST
Web Site : http://panasonic.net/avc/projector/
© Panasonic Corporation 2013
Panasonic Corporation
a
Panasonic Systems Communications Company of North Americ
TEL: (877) 803 - 8492
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3
TEL: (905) 624 - 5010
5th Floor, Two Riverfront Plaza, Newark, NJ 07102-5490