Panasonic Projector Pt Ax100E Operating Instructions
Here you can view all the pages of manual Panasonic Projector Pt Ax100E Operating Instructions. The Panasonic manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 1
TQBJ0204 ENGLISH LCD Projector Operating Instructions Model No. PT-AX100E Before operating this product, please read these instructions carefully and save this manual for future use.
Page 2
2 - ENGLISH Important Safety Notice Dear Panasonic Customer: This instruction booklet provides all the necessary operating information that you might require. We hope it will help you to get the most out of your new product, and that you will be pleased with your Panasonic LCD projector.The serial number of your product may be found on its bottom. You should note it in the space provided below and retain this booklet in case service is required. Model number:PT-AX100E Serial number: WARNING:THIS...
Page 3
Important Safety Notice ENGLISH - 3 IMPORTANT: THE MOULDED PLUG (U.K. only) FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY. This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 13 amp fuse is fitted in this plug. Should the fuse need to be replaced, please ensure that the replacement fuse has a rating of13 amps and that it is approved by ASTA or BSI to BS1362. Check for the ASTA mark a or the BSI mark ` on the body of the fuse. If the plug...
Page 4
4 - ENGLISH Contents JQuick Steps Important Safety Notice .............................. 2 Precautions with regard to safety ............. 6 WARNINGS ........................................................... 6 CAUTIONS............................................................. 8 Before use.................................................... 9 Accessories ............................................................ 9 Cautions when transporting ................................... 9 Cautions when...
Page 5
ENGLISH - 5 Preparation Getting Started Basic Operation Settings Maintenance Appendix Menu Navigation........................................26 Navigating through the MENU ..............................26 Main menu ............................................................26 Sub-menu..............................................................27 PICTURE Menu ..........................................28 PICTURE MODE...................................................28 CONTRAST...
Page 6
6 - ENGLISH PreparationPrecautions with regard to safety If you notice smoke, strange smells or noise coming from the projector, disconnect the mains plug from the mains socket. Do not continue to use the projector in such cases, otherwise fire or electric shocks could result. Check that no more smoke is coming out, and then contact an Authorised Service Centre for repairs. Do not attempt to repair the projector yourself, as this can be dangerous. Do not install this projector in a place which is...
Page 7
Precautions with regard to safety ENGLISH - 7 Preparation During a thunderstorm, do not touch the projector or the cable. Electric shocks can result. Do not use the projector in a bath or shower. Fire or electric shocks can result. Do not place your skin into the light beam while the projector is being used. Strong light is emitted from the projector’s lens. If you place directly into this light, it can hurt or damage your skin. Do not look into the lens while the projector is being used. Strong...
Page 8
Precautions with regard to safety 8 - ENGLISH Preparation Do not cover the air inlet port or the air outlet port. Doing so may cause the projector to overheat, which can cause fire or damage to the projector. Do not place the projector in narrow, badly ventilated places such as closets or bookshelves. Do not place the projector on cloth or papers, as these materials could be drawn into the air inlet port. Do not set up the projector in humid or dusty places or in places where the projector may...
Page 9
ENGLISH - 9 Preparation Before use Make sure the following accessories are provided with your projector. Do not subject the projector to excessive vibration or shocks. The projector lens need to be handled with care. Cover the lens with the lens cover when transporting the projector. Avoid setting up in places which are subject to vibration or shocks. The internal parts can be damaged, which may cause malfunctions or accidents. Avoid setting up in places which are subject to sudden temperature...
Page 10
Before use 10 - ENGLISH Preparation In order to get the best picture quality Draw curtains or blinds over any windows and turn off any lights near the screen to prevent outside light or light from indoor lamps from shining onto the screen. Do not touch the surfaces of the lens with your bare hands. If the surface of the lens becomes dirty from fingerprints or anything else, this will be magnified and projected onto the screen. Moreover, when not using the projector, cover it with the lens...