Panasonic Projector Pt Ax100E Operating Instructions

							TQBJ0204
ENGLISH
LCD Projector
Operating Instructions
Model No. PT-AX100E
Before operating this product, please read these instructions carefully and save this manual for 
future use. 
						

							2 - ENGLISH
Important Safety Notice
Dear Panasonic Customer:
This instruction booklet provides all the necessary operating information that you might require. 
We hope it will help you to get the most out of your new product, and that you will be pleased 
with your Panasonic LCD projector.The serial number of your product may be found on its 
bottom. You should note it in the space provided below and retain this booklet in case service is 
required.
Model number:PT-AX100E
Serial number:
WARNING:THIS APPARATUS MUST BE EARTHED.
WARNING: To prevent damage which may result in fire or shock hazard, do not 
expose this appliance to rain or moisture.
Machine Noise Information Ordinance 3. GSGV, January 18, 1991: The sound pressure level 
at the operator position is equal or less than 70 dB (A) according to ISO 7779.
WARNING:
1. Remove the plug from the mains socket when this unit is not in use for a prolonged 
period of time.
2. To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer 
servicing to qualified service personnel.
3. Do not remove the earthing pin on the mains plug. This apparatus is equipped with a 
three prong earthing-type mains plug. This plug will only fit an earthing-type mains 
socket. This is a safety feature. If you are unable to insert the plug into the mains socket, 
contact an electrician. Do not defeat the purpose of the earthing plug.
CAUTION:To assure continued compliance, follow the attached installation instructions, 
which includes using the provided power cord and shielded interface cables 
when connecting to computer or peripheral device. If you use serial port to 
connect PC for external control of projector, you must use optional RS-232C 
serial interface cable with ferrite core. Any unauthorized changes or 
modifications to this equipment will void the user’s authority to operate.
Indication based on the German law Geräte- und Produktsicherheitsgesetz
Directive 2001/95/EC (Article 5);
Panasonic Marketing Europe GmbH
Hagenauer Str. 43 65203 Wiesbaden F.R.GERMANY 
						

							Important Safety Notice
ENGLISH - 3
IMPORTANT: THE MOULDED PLUG (U.K. only)
FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY.
This appliance is supplied with a moulded three pin mains plug for your safety and convenience. 
A 13 amp fuse is fitted in this plug. Should the fuse need to be replaced, please ensure that the 
replacement fuse has a rating of13 amps and that it is approved by ASTA or BSI to BS1362.
Check for the ASTA mark a or the BSI mark ` on the body of the fuse.
If the plug contains a removable fuse cover, you must ensure that it is refitted when the fuse is 
replaced. If you lose the fuse cover, the plug must not be used until a replacement cover is 
obtained. A replacement fuse cover can be purchased from an Authorised Service Centre.
If the fitted moulded plug is unsuitable for the mains socket in your home, then the fuse 
should be removed and the plug cut off and disposed of safely. There is a danger of 
severe electrical shock if the cut off plug is inserted into any 13 amp socket.
If a new plug is to be fitted, please observe the wiring code as shown below.
If in any doubt, please consult a qualified electrician.
WARNING:THIS APPLIANCE MUST BE EARTHED.
IMPORTANT:The wires in this mains lead are coloured in accordance with the following code:
Green - and - Yellow: Earth
Blue: Neutral
Brown: Live
As the colours of the wire in the mains lead of this appliance may not correspond with the 
coloured markings identifying the terminals in your plug, proceed as follows.
The wire which is coloured GREEN - AND - YELLOW must be connected to the 
terminal in the plug which is marked with the letter E or by the Earth symbol W or 
coloured GREEN or GREEN - AND - YELLOW.
The wire which is coloured BLUE must be connected to the terminal in the plug which 
is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal in the plug 
which is marked with the letter L or coloured RED.
How to replace the fuse
: Open the fuse compartment with a screwdriver and 
replace the fuse.
13A250VBS1363/A
HE-8N
ASAL 
						

							4 - ENGLISH
Contents
JQuick Steps Important Safety Notice .............................. 2
Precautions with regard to safety ............. 6
WARNINGS ........................................................... 6
CAUTIONS............................................................. 8
Before use.................................................... 9
Accessories ............................................................ 9
Cautions when transporting ................................... 9
Cautions when installing........................................ 9
Cautions on use ................................................... 10
About Your Projector ................................ 11
Remote control ................................................... 11
Projector ............................................................... 12
Setting up................................................... 14
Screen size and throw distance ........................... 14
Projection method ................................................ 15
Front leg adjuster and throwing angle .................. 15
Lens shift and positioning..................................... 16
Connections .............................................. 18
Before connection to the projector ....................... 18
Connecting with AV devices................................. 18
Connecting with HDMI/PC ................................... 18
Switching the projector on/off ................. 19
Mains lead ............................................................ 19
POWER indicator ................................................. 19
Switching on the projector .................................... 20
Switching off the projector .................................... 20
Projecting an image .................................. 21
Selecting the input signal ..................................... 21
Positioning the image ........................................... 21
Remote control operation........................ 22
Operating range ................................................... 22
Input switching ..................................................... 22
Capturing an image .............................................. 22
Switching the aspect ratio .................................... 23
Switching off the projector automatically .............. 23
Resetting to the factory default settings ............... 23
Turning on the button backlight ............................ 23
Switching the picture mode .................................. 23
Adjusting the image.............................................. 24
Setting your own colour profile ............................. 24
2. Connect with other devices
See “Connections” on page 18. 1. Set up your projector
See “Setting up” on page 14.
3. Prepare the Remote control
See “Remote control” on page 11.
4. Start projecting
See “Switching the projector on/off” on 
page 19.
5. Adjust the image
See “Menu Navigation” on page 26.
Preparation
Getting Started
Basic Operation 
						

							ENGLISH - 5
Preparation Getting Started Basic Operation Settings Maintenance
Appendix
Menu Navigation........................................26
Navigating through the MENU ..............................26
Main menu ............................................................26
Sub-menu..............................................................27
PICTURE Menu ..........................................28
PICTURE MODE...................................................28
CONTRAST ..........................................................28
BRIGHTNESS .......................................................28
COLOUR ...............................................................28
TINT ......................................................................29
SHARPNESS ........................................................29
COLOUR TEMPERATURE...................................29
DYNAMIC IRIS......................................................29
LIGHT HARMONIZER ..........................................29
ADVANCED MENU...............................................29
FAVOURITE SAVE ...............................................30
FAVOURITE LOAD ...............................................30
SIGNAL MODE .....................................................30
POSITION Menu .........................................31
H - POSITION .......................................................31
V - POSITION .......................................................31
DOT CLOCK .........................................................31
CLOCK PHASE.....................................................31
ASPECT ................................................................32
WSS ......................................................................33
OVER SCAN .........................................................33
KEYSTONE...........................................................33
AUTO SETUP .......................................................33
OPTION Menu ............................................34
INPUT GUIDE .......................................................34
OSD DESIGN........................................................34
OSD POSITION ....................................................34
BACK COLOUR ....................................................34
STARTUP LOGO ..................................................34
AUTO SEARCH ....................................................34
HDMI SIGNAL LEVEL...........................................34
INSTALLATION.....................................................35
SLEEP...................................................................35
ALTITUDE .............................................................35
LAMP POWER ......................................................35
LAMP RUNTIME ...................................................35
TEST PATTERN ...................................................35
TEMP and LAMP Indicators ..................... 36
Controlling alerts .................................................. 36
Care and Replacement ............................. 37
Before cleaning .................................................... 37
Cleaning your projector ........................................ 37
Before replacing the Lamp unit ............................ 38
When to replace the Lamp unit ............................ 38
Replacing the lamp unit ........................................ 39
Troubleshooting ........................................ 40
Technical Information ............................... 41
List of compatible signals ..................................... 41
Serial terminal ...................................................... 42
Menu structure ..................................................... 45
Specifications............................................ 46
Dimensions ................................................ 48
Trademark acknowledgements................ 49
Index ........................................................... 50
SettingsMaintenance
Appendix 
						

							6 - ENGLISH
PreparationPrecautions with regard to safety
If you notice smoke, strange smells or noise coming 
from the projector, disconnect the mains plug from 
the mains socket.
 Do not continue to use the projector in such cases, 
otherwise fire or electric shocks could result.
 Check that no more smoke is coming out, and then 
contact an Authorised Service Centre for repairs.
 Do not attempt to repair the projector yourself, as 
this can be dangerous.
Do not install this projector in a place which is not 
strong enough to take the full weight of the 
projector.
 If the installation location is not strong enough, it may 
fall down or tip over, and severe injury or damage 
could result.
Installation work (such as ceiling suspension) 
should only be carried out by a qualified technician.
 If installation is not carried out correctly, there is the 
danger that injury or electric shocks may occur.
 Do not use other than an authorised ceiling mount 
bracket.
If foreign objects or water get inside the projector, 
or if the projector is dropped or the cabinet is 
broken, disconnect the mains plug from the mains 
socket.
 Continued use of the projector in this condition may 
result in fire or electric shocks.
 Contact an Authorised Service Centre for repairs.
Do not overload the mains socket.
 If the power supply is overloaded (for example, by 
using too many adapters), overheating may occur 
and fire may result.
Do not remove the cover or modify it in any way.
 High voltages can cause fire or electric shocks.
 For any inspection, adjustment and repair work, 
please contact an Authorised Service Centre.
Clean the mains plug regularly to prevent it from 
becoming covered in dust.
 If dust builds up on the mains plug, the resulting 
humidity can damage the insulation, which could 
result in fire. Pull the mains plug out from the mains 
socket and wipe it with a dry cloth.
 If not using the projector for an extended period of 
time, pull the mains plug out from the mains socket.Do not do anything that might damage the mains 
lead or the mains plug.
 Do not damage the mains lead, make any 
modifications to it, place it near any hot objects, bend 
it excessively, twist it, pull it, place heavy objects on 
top of it or wrap it into a bundle.
 If the mains lead is used while damaged, electric 
shocks, short-circuits or fire may result.
 Ask an Authorised Service Centre to carry out any 
repairs to the mains lead that might be necessary.
Do not handle the mains plug with wet hands.
 Failure to observe this may result in electric shocks.
Insert the mains plug securely into the mains 
socket.
 If the plug is not inserted correctly, electric shocks or 
overheating could result.
 Do not use plugs which are damaged or mains 
sockets which are coming loose from the wall.
Do not place the projector on top of surfaces which 
are unstable.
 If the projector is placed on top of a surface which is 
sloped or unstable, it may fall down or tip over, and 
injury or damage could result.
Do not place the projector into water or let it become 
wet.
 Failure to observe this may result in fire or electric 
shocks.
Do not place the projector on soft materials such as 
carpets or sponge mats.
 Doing so may cause the projector to overheat, which 
can cause burns, fire or damage to the projector.
Do not place liquid containers on top of the 
projector.
 If water spills onto the projector or gets inside it, fire 
or electric shocks could result.
 If any water gets inside the projector, contact an 
Authorised Service Centre.
Do not insert any foreign objects into the projector.
 Do not insert any metal objects or flammable objects 
into the projector or drop them onto the projector, as 
doing so can result in fire or electric shocks.
Do not allow the + and - terminals of the batteries to 
come into contact with metallic objects such as 
necklaces or hairpins.
 Failure to observe this may cause the batteries to 
leak, overheat, explode or catch fire.
 Store the batteries in a plastic bag and keep them 
away from metallic objects.
WARNINGS 
						

							Precautions with regard to safety
ENGLISH - 7
Preparation
During a thunderstorm, do not touch the projector 
or the cable.
 Electric shocks can result.
Do not use the projector in a bath or shower.
 Fire or electric shocks can result.
Do not place your skin into the light beam while the 
projector is being used.
 Strong light is emitted from the projector’s lens. If 
you place directly into this light, it can hurt or 
damage your skin.
Do not look into the lens while the projector is being 
used.
 Strong light is emitted from the projector’s lens. If 
you look directly into this light, it can hurt and 
damage your eyes.
 Be especially careful not to let young children look 
into the lens. In addition, turn off the power and 
disconnect the mains plug when you are away from 
the projector.
Do not place your hands or other objects close to 
the air outlet port.
 Heated air comes out of the air outlet port. Do not 
place your hands or face, or objects which cannot 
withstand heat close to this port [allow at least 
10 cm (4) of space], otherwise burns or damage 
could result.Replacement of the lamp is better to be carried out 
by a qualified technician.
 The lamp has high internal pressure. If improperly 
handled, explosion might result.
 The lamp can easily become damaged if struck 
against hard objects or dropped, and injury or 
malfunctions may result.
When replacing the lamp, allow it to cool for at least 
one hour before handling it.
 The lamp cover gets very hot, and touching it can 
cause burns.
Before replacing the lamp, be sure to disconnect 
the mains plug from the mains socket.
 Electric shocks or explosions can result if this is not 
done.
Do not allow infants or pets to touch the remote 
control unit.
 The accessory remote control unit can be used to 
operate not only the projector but also other 
appliances such as air conditioners and electrical 
device by programming them using the learning 
function. If the remote control unit operated 
inappropriately, fire or injury may result.
 Keep the remote control unit out of the reach of 
infants and pets after using it. 
						

							Precautions with regard to safety
8 - ENGLISH
Preparation
Do not cover the air inlet port or the air outlet port.
 Doing so may cause the projector to overheat, which 
can cause fire or damage to the projector.
 Do not place the projector in narrow, badly ventilated 
places such as closets or bookshelves.
 Do not place the projector on cloth or papers, as 
these materials could be drawn into the air inlet port.
Do not set up the projector in humid or dusty places 
or in places where the projector may come into 
contact with oily smoke or steam.
 Using the projector under such conditions may result 
in fire, electric shocks or plastic deterioration. The 
plastic deterioration may cause the falling down of 
the projector which is mounted in the ceiling.
When disconnecting the mains lead, hold the plug, 
not the lead.
 If the mains lead itself is pulled, the lead will become 
damaged, and fire, short-circuits or serious electric 
shocks may result.
Always disconnect all cables before moving the 
projector.
 Moving the projector with cables still attached can 
damage the cables, which could cause fire or electric 
shocks to occur.
Do not place any heavy objects on top of the 
projector.
 Failure to observe this may cause the projector to 
become unbalanced and fall, which could result in 
damage or injury.
Do not short-circuit, heat or disassemble the 
batteries or place them into water or fire.
 Failure to observe this may cause the batteries to 
overheat, leak, explode or catch fire, and burns or 
other injury may result.
When inserting the batteries, make sure the 
polarities (+ and -) are correct.
 If the batteries are inserted incorrectly, they may 
explode or leak, and fire, injury or contamination of 
the battery compartment and surrounding area may 
result.
Use only the specified batteries.
 If incorrect batteries are used, they may explode or 
leak, and fire, injury or contamination of the battery 
compartment and surrounding area may result.Do not mix old and new batteries.
 If the batteries are inserted incorrectly, they may 
explode or leak, and fire, injury or contamination of 
the battery compartment and surrounding area may 
result.
Do not put your weight on this projector.
 You could fall or the projector could break, and injury 
may result.
 Be especially careful not to let young children stand 
or sit on the projector.
If not using the projector for an extended period of 
time, disconnect the mains plug from the mans 
socket.
 If dust builds up on the mains plug, the resulting 
humidity may damage the insulation, which could 
result in fire.
Disconnect the mains plug from the mains socket 
as a safety precaution before carrying out any 
cleaning.
 Electric shocks can result if this is not done.
If the lamp has broken, ventilate the room 
immediately. Do not touch or bring your face close 
to the broken pieces.
 Failure to observe this may cause the user to absorb 
the gas which was released when the lamp broke 
and which contains nearly the same amount of 
mercury as fluorescent lamps, and the broken pieces 
may cause injury.
 If you believe that you have absorbed the gas or that 
the gas has got into your eyes or mouth, seek 
medical advice immediately.
 Ask your dealer about the replacement of the lamp 
unit and check the inside of the projector.
Ask an Authorised Service Centre to clean inside 
the projector at least once a year.
 If dust is left to build up inside the projector without 
being cleaned out, it can result in fire or problems 
with operation.
 It is a good idea to clean the inside of the projector 
before the season for humid weather arrives. Ask 
your nearest Authorised Service Centre to clean the 
projector when required. Please discuss with the 
Authorised Service Centre regarding cleaning costs.
We are constantly making efforts to preserve and maintain a clean environment. Please take non repairable 
units back to your dealer or a recycling company.
CAUTIONS 
						

							ENGLISH - 9
Preparation
Before use
Make sure the following accessories are provided with your projector.
Do not subject the projector to excessive vibration or shocks.
 The projector lens need to be handled with care.
 Cover the lens with the lens cover when transporting the projector.
Avoid setting up in places which are subject to 
vibration or shocks.
 The internal parts can be damaged, which may 
cause malfunctions or accidents.
Avoid setting up in places which are subject to 
sudden temperature changes, such as near an air 
conditioner.
 The life of the lamp may be shortened or the 
projector may be turned off. See “TEMP indicator” on 
page 36.
Do not set up the projector near high-voltage power 
lines or near motors.
 The projector may be subject to electromagnetic 
interference.If installing the projector to the ceiling, ask a 
qualified technician to carry out all installation 
work.
 You will need to purchase the separate installation kit 
(Model No. ET-PKX100). Furthermore, all installation 
work should only be carried out by a qualified 
technician.
If using this projector at high elevations 
(above 1 400 m), set the ALTITUDE to HIGH. See 
“ALTITUDE” on page 35.
 Failure to observe this may result in malfunctions or 
the life of the lamp or the other components may be 
shortened.
Accessories
Remote control (N2QAYB000064 x 1) AA batteries for Remote control (x 2)
Mains lead for continental Europe (K2CM3FR00002 x 1)
Mains lead for UK (K2CT3FR00003 x 1)
Cautions when transporting
Cautions when installing 
						

							Before use
10 - ENGLISH
Preparation
In order to get the best picture quality
 Draw curtains or blinds over any windows and turn 
off any lights near the screen to prevent outside light 
or light from indoor lamps from shining onto the 
screen.
Do not touch the surfaces of the lens with your bare 
hands.
 If the surface of the lens becomes dirty from 
fingerprints or anything else, this will be magnified 
and projected onto the screen. Moreover, when not 
using the projector, cover it with the lens cover.
Screen
 Do not apply any volatile substances which may 
cause discolouration to the screen, and do not let it 
become dirty or damaged.Lamp
 The lamp may need to be replaced earlier due to 
variables such as individual lamp characteristics, 
usage conditions and the installation environment, 
especially when the projector is subjected to 
continuous use for more than 10 hours or the power 
is frequently turned on and off.
Liquid crystal panel
 Do not project the same image for long periods of 
time, as this may remain as an afterimage on the 
liquid crystal panel.
 The liquid crystal panel of the projector is built with 
very high precision technology to provide fine picture 
details. Occasionally, a few stuck pixels may appear 
on the screen as fixed points of blue, green or red. 
Please note that this does not affect the performance 
of your LCD.
Cautions on use