Panasonic Projector Pt Ae2000u Operating Instructions

ENGLISH - 31
Settings
PICTURE menu
Depending on the projection environment, you can use 
these preset parameter settings to optimize image 
projection. Press I H to cycle through the options.You can adjust the contrast of the projected image. 
Adjust the BRIGHTNESS in advance if necessary.
 Setting range: -64 to +64
You can adjust the brightness of the projected image.
 Setting range: -32 to +32
You can adjust the color saturation of the projected 
image.
 Setting range: -32 to +32
 When COMPUTER signal...

Settings
PICTURE menu
32 - ENGLISH
You can adjust the white balance of the projected image.
 Setting range: -6 to +6
You can switch automatic adjustment of the lamp and 
the lens iris on/off.
 ON: Automatic adjustment
 OFF: No adjustment
You can monitor whether or not the luminance level of 
the input signal is in the recommended range by 
displaying it in the waveform monitor. If the waveform is 
not in the range, adjust it for the best quality. See 
“Adjusting the signal condition with a waveform” on...

PICTURE menu
ENGLISH - 33
Settings
QAdjusting the image in a split window
1. Select AREA SELECT and press the ENTER 
button.
 The image will be frozen and the area cursor will be 
displayed.
2. Press I H to move the area cursor to select the 
required area and press the ENTER
 button.
 The selected frozen image will be displayed in a split 
window.
3. Press the MENU to display the PICTURE menu on 
the right.
4. Adjust the required PICTURE menu items.
 The Other menu items are not available.
 Sub-menu...

Settings
PICTURE menu
34 - ENGLISH
JCOLOR MANAGEMENT
You can manage your own defined color settings. 
See “Setting your own color profile” on page 26.
JxvYCC
You can switch on/off the automatic adjustment 
system for signals which complied with xvYCC.
 ON: Active
 OFF: Deactive
JDETAIL CLARITY
You can switch on/off the automatic detail clarity 
system.
 ON: Active
 OFF: Deactive
JCINEMA REALITY
You can switch the automatic image synchronizer 
on/off for 24 frames a second images, such as 
movies. Press I...

PICTURE menu
ENGLISH - 35
Settings
You can edit the named memory settings.
QDeleting a memory setting
1. Select MEMORY DEL and press the ENTER 
button.
2. Select the required memory setting and press the 
ENTER button.
 If you select ALL DELETE, you can delete all of the 
saved memory settings.
3. Select OK in the confirmation screen and press the 
ENTER button.
QChanging the name of the memory 
setting
1. Select the required memory setting and press the 
ENTER button.
2. Use F G I H to specify the...

36 - ENGLISH
Settings
POSITION menu
You can move the projected image horizontally for fine 
adjustment.
You can move the projected image vertically for fine 
adjustment.
If you have interference patterns of the projected image, 
which is sometimes referred to as moire or noise, you 
can minimize it by pressing I H to adjust the clock 
frequency. (Available with signals from COMPUTER IN 
only)If you require further adjustment for the same reason as 
the DOT CLOCK adjustment, you can fine adjust the...

POSITION menu
ENGLISH - 37
Settings
JAspect ratio options and projection example
If you apply the aspect ratio options to the projected image, the result will be as follows. The result may differ 
due to the input signals. See “Switching the aspect ratio” on page 23.
QVIDEO/S-VIDEO/COMPONENT
Not available with 1 125 (1 080)/50i, 1 125 (1 080)/60i, 1 125 (1 080)/50p, 1 125 (1 080)/60p, 1 125 (1 080)/
24p, 750 (720)/50p and 750 (720)/60p signals.
QCOMPONENT signals
Available with 1 125 (1 080)/50i, 1 125...

Settings
POSITION menu
38 - ENGLISH
WSS (Wide Screen Signalling) detects if a PAL/
625p (576p)/625i (576i) signal is input and that signal 
has an identification signal, and switch the aspect ratio 
to required setting automatically. You can switch the 
system off manually.
If the 4 edges of an image is partly dropped, you can use 
this function to adjust and project it properly.
 Setting range: 0 to +10
 OVER SCAN is not available with COMPUTER 
signals.
If the projector is aligned non-perpendicularly...

ENGLISH - 39
Settings
LENS CONTROL
You can use the 2 different test patterns to adjust the 
focus and zoom of the image. See “Lens shift and 
positioning” on page 16.
1. Press ENTER to display test pattern 1.
 Press F G to adjust the focus and I H to adjust 
the zoom.
2. Press ENTER to display test pattern 2.
 Press F G to adjust the focus and I H to adjust 
the zoom.
3. Press ENTER to display the projected image.
 You can confirm the adjustment is fit to the projected 
image.
4. Press MENU or RETURN to...

40 - ENGLISH
Settings
OPTION menu
When you change the input method, the guidance 
appears in the upper right corner of the screen. The 
following display methods are available. Press I H to 
cycle through the options.
You can change the background color of the menu. 
Press I H to cycle through the options.
 TYPE1Semi transparent black
 TYPE2Solid blue
 TYPE3Semi transparent dark blue
You can change the position where to display the menu. 
Press I H to cycle through the options.You can choose a screen...