Panasonic Progressive Wide Plasma Display Th 42pwd5 Operating Instructions

31
TIMER Set
Press to display the POWER ON SET
UP / POWER OFF SET UP screen. Press to select
POWER ON TIME/
POWER OFF TIME.
1
Press to select HOURS ADJUSTMENT/
MINUTES  ADJUSTMENT.
Press to adjust each time.
2
Press to select POWER ON FUNCTION/
POWER OFF FUNCTION.
Press to select ON.
4 3
Press twice to exit from SETUP.
R
SET UP TIMER
POWER ON SETUP
POWER ON FUNCTION
HOURS ADJUSTMENT0 : 52
     00
MINUTES ADJUSTMENT     52
SET UP TIMER
PRESENT TIME OF DAY
POWER ON FUNCTION0:52
OFF
POWER ON TIMEPOWER OFF...

32
SCREENSAVER (For preventing after-images)
2
3 1
4
Press to display the SETUP menu screen.
SET UP
Press to select the SCREENSAVER.
Press to select the SCREENSAVER screen.
Press to select the FUNCTION.
Press to select the desired function.
Press to select the MODE.
Press to select each mode items. Do not display a still picture, especially in 4:3 mode, for any length of time.
If the display must remain on, a SCREENSAVER should be used.
MODE selection
NEGATIVE / SCROLL selection
WHITE BAR SCROLL : A...

33
Setup of SCREENSAVER Time
5
SCREENSAVER
Press to select START TIME/ FINISH TIME
(When TIME OF DAY  is selected).
Press to select SHOW DURATION/ SAVER
DURATION (When INTERVAL  is selected).
Press to select each time adjustment screen.
START TIME
START TIME0:00   00MINUTES ADJUSTMENT   00HOURS ADJUSTMENT
FINISH TIME
FINISH TIME0:00
MINUTES ADJUSTMENTHOURS ADJUSTMENT   00
   00
Press to select HOURS ADJUSTMENT/
MINUTES ADJUSTMENT.
Press to set up HOURS or MINUTES.
PERIODIC TIME
SHOW DURATION0:00
MINUTES...

34
Setup for MULTI DISPLAY
 By lining up Plasma Displays in groups of 4 or 9 as illustrated below, an enlarged picture may be displayed across all
screens.
 For this mode of operation, each plasma display has to be set up with a DISPLAY number to determine its location.
Press to display the SETUP menu screen.
Press to display the
“MULTI DISPLAY
SETUP” menu. Press to select the
MULTI DISPLAY SETUP.
1
2
3
Press to select the
MULTI DISPLAY SETUP.
Press to select “ON”
or “OFF”.
How to setup MULTI DISPLAY...

35
Setup for MULTI DISPLAY
Press to select ARRANGEMENT (2nd step).
Press to select “2×2”, “3×3”.
How to set the Display location number for each Plasma Display
Press to select LOCATION.
Press to select the required arrangement
number. (A1-C3 : Refer to the following)
4
5
DISPLAY NUMBER locations for each arrangement.
(2×2) (3×3)
A1 A2
B1 B2A1 A2 A3
B1 B2 B3
C1 C2 C3
6
Press twice to exit from SETUP.
MULTI DISPLAY SETUP
MULTI DISPLAY SETUP
ARRANGEMENTON
2     2
 LOCATIONA1
MULTI DISPLAY SETUP
MULTI...

36
3D Y/C FILTER – For NTSC Video images
SET UP for Input Signals
COMPONENT/RGB IN SELECT
Select to match the signals from the source connected to the COMPONENT/RGB input terminals.
Y,  P
B, PR signals    
“COMPONENT”
R, G, B, HD, VD signals  
  
“RGB”
INPUT
SURROUND
VOL
NR
PICTURE
SOUNDSET UP
ASPECT PICTURE
POS. /SIZE
SET UP1
2
Press to display the SET UP menu screen.
Press to select the “COMPONENT/RGB IN
SELECT”.
Press to select the desired mode.
R
Press to exit from adjust mode.
Select “SIGNAL” from...

37
SET UP for Input Signals
COLOR SYSTEM / Panasonic AUTO
Select SIGNAL from the “SET UP” menu during VIDEO (S VIDEO) input
signal mode.(“SIGNAL [VIDEO]” menu is displayed.)
Press to select the “COLOR SYSTEM” or
“Panasonic AUTO”.
Press to select each function.
3D  Y/C  FILTER  (
NTSC)
COLOR  SYSTEM
Panasonic  AUTO  (
4:3)ON
AUTO
NORMAL
3:2 PULLDOWNOFF
SIGNAL[ 
 VIDEO  ]
Press  
(ACTION) button
If the image becomes unstable:
With the system set on Auto, under conditions of
low level or noisy input signals...

38
Select SIGNAL from the “SET UP” menu during RGB or PC input signal mode.
Press to select each item.
SET  UP
SIGNAL
SCREENSAVER
COMPONENT/RGB-IN  SELECT
RGB
OSD  LANGUAGEENGLISH (
US)
MULTI DISPLAY SETUP
SET UP TIMER
SIGNAL[
  RGB  ]
SYNC
H
-FREQ.                 kHz
V
-FREQ.                  HzH & V
31.5
60.0
SYNC
SYNCH & V
SYNCON  VIDEO
SYNCON  G
Setting RGB sync signal
Confirm that the input is set to RGB INPUT (this setting is valid only for RGB INPUT).
H & V:The H and V sync signals are input from...

39
Troubleshooting
Before you call for service, determine the symptoms and make a few simple checks as shown below.
Symptoms
Some parts of the screen do not
light up.
After-images appear
Plasma Display panel
Check
The plasma display panel is manufactured using an extremely high level of precision
technology, however, sometimes some parts of the screen may be missing picture
elements or have luminous spots. This is not a malfunction.
Do not allow a still picture to be displayed for an extended period, as...

40