Panasonic Progressive Wide Plasma Display Th 37pwd6 Operating Instructions

31
SET UP for MULTI DISPLAY
Press to select ARRANGEMENT (2nd step).
Press to select “2×2”, “3×3”.
How to set the Display location number for each Plasma Display
Press to select LOCATION.
Press to select the required arrangement
number. (A1-C3 : Refer to the following)
4
5
DISPLAY NUMBER locations for each arrangement.
(2×2) (3×3)
6
Press twice to exit from SETUP.
Notes:
(1) For RGB input signals, normal multi-display magnification is only available at the VGA, SVGA and XGA resolution.
(2) The...

32
3D Y/C FILTER – For NTSC Video images
SET UP for Input Signals
COMPONENT/RGB IN SELECT
Select the input signals to be connected by installing the Optional Terminal Board.
(Refer to the Operating Instructions for the optional Terminal Board.)
Select to match the signals from the source connected to the COMPONENT/RGB input terminals.
Y,  P
B, PR signals    
“COMPONENT”
R, G, B, HD, VD signals  
  
“RGB”
1
2
Press to display the SET UP menu screen.
Press to select the “COMPONENT/RGB IN
SELECT”.
Press to...

33
SET UP for Input Signals
COLOR SYSTEM / Panasonic AUTO
Select SIGNAL from the “SET UP” menu during VIDEO (S VIDEO) input
signal mode.(“SIGNAL [VIDEO]” menu is displayed.)
Press to select the “COLOR SYSTEM” or
“Panasonic AUTO”.
Press to select each function.
Press 
 
(ACTION) button If the image becomes unstable:
With the system set on Auto, under conditions of
low level or noisy input signals the image may in
rare cases become unstable. Should this occur,
set the system to match the format of the...

34
Select SIGNAL from the “SET UP” menu during RGB input signal.
Press to select each item.
SYNC
Setting RGB sync signal
Confirm that the input is set to RGB INPUT (this setting is valid only for RGB INPUT
signal).
H & V:
The H and V sync signals are input from the HD/VD connector.
ON G: Uses a synchronized signal on the Video G signal, which is input
from the G connector.
CS: Uses a synchronized signal of Composite Sync input.
Displays the H (Horizontal)/V (Vertical) frequencies.
This display is valid...

35
Troubleshooting
Before you call for service, determine the symptoms and make a few simple checks as shown below.
Symptoms
Some parts of the screen do not
light up.
After-images appear
Plasma Display panel
Check
The plasma display panel is manufactured using an extremely high level of precision
technology, however, sometimes some parts of the screen may be missing picture
elements or have luminous spots. This is not a malfunction.
Do not allow a still picture to be displayed for an extended period, as...

36
Input signal can be displayed
Applicable input signals for PC Input (D-sub 15P) (∗ Mark)
Note: Signals without above specification may not be displayed properly.Signal nameHorizontal Vertical
COMPONENT PC
When Multi Screen
frequency(kHz) frequency(Hz)and Digital Zoom
1 525 (480) /60i 15.73 59.94∗∗∗
2 525 (480) /60p 31.47 59.94∗∗∗
3 625 (575) /50i 15.63 50.00∗∗∗
4 625 (575) /50p 31.25 50.00∗∗∗
5 750 (720) /60p 45.00 60.00∗∗∗
6 750 (720) /50p 37.50 50.00∗∗∗
7 1,125 (1,080) /60i 33.75 59.94∗∗∗
8 1,125...

37
Note:
Design and specifications are subject to change without notice. Mass and dimensions shown are approximate.
Specifications
Power Source
Power Consumption
Maximum
Stand-by condition
Power off condition
Plasma Display panel
Contrast Ratio
Screen size
(No.of pixels)
Operating condition
Temperature
Humidity
Applicable signals
Color System
Scanning format
PC signals
Connection terminals
PC
SERIAL
SPEAKERS (6 Ω)
Accessories Supplied
Remote Control Transmitter
Batteries
Fixing bands
Ferrite core...

Panasonic Consumer Electronics Company
Division of Matsushita Electric Corporation of Americ
a
Hospitality Sales Grou
p
One Panasonic Way, 4A
-4
Secaucus, NJ 0709
4
Panasonic Commercial Plasma Display
Limited Warran
ty
Panasonic Consumer Electronics Company (“the Warrantor”) will repair  this product  with  new  or  rebuilt parts, free  of charge, in the USA, in
the event of defects in material or workmanship as follows (all time periods commence from the date of the original purchase
):
Labor: On-site...

Printed in Japan
MBS0803S0
Customer’s Record
The model number and serial number of this product can be found on its back cover. You should note this serial
number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your
purchase to aid in identification in the event of theft or loss, and for Warranty Service purposes.
Model Number
Serial Number
Matsushita Electric Industrial Co., Ltd.