Panasonic Progressive Wide Plasma Display Th 37pwd6 Operating Instructions

21
PICTURE
NORMALIZE
PICTURE  MENU
BRIGHTNESS
COLORSTANDARD
0
0
TINT
COLOR  TEMPNORMAL
ADVANCED  SETTINGSON PICTURE25
0
0
SHARPNESS
NORMAL
 Helpful Hint (    / NORMALIZE Normalization)
ADVANCED SETTINGS ON
Enables fine picture adjustment at a
professional level (see next page).
ADVANCED SETTINGS OFF
Displays images with settings of the
PICTURE menu.
PICTURE Adjustments
1
2Press to display the PICTURE menu.
Select to adjust each item.
Press to select the menu to adjust.
Select the desired level by looking...

22
ADVANCED SETTINGS
 Helpful Hint (    / NORMALIZE Normalization)
Note:
In PICTURE, there is nor a noticeable change even when contrast is increased with a bright picture or reduced with a
dark picture.
PICTURE Adjustments
Item
PICTURE
BRIGHTNESS
COLOR
TINT
(NTSC only)
SHARPNESS
 Effect                                Adjustments
Less             More
Darker           Brighter
Reddish        Greenish
Adjusts the proper picture contrast.
Adjusts for easier viewing of dark pictures
such as night scenes and...

23
PRESENT TIME SETUP
PRESENT TIME SETUP/SET UP TIMER
The timer can switch the Plasma Display ON or OFF.
Before attempting Timer Set, confirm the PRESENT TIME OF DAY and
adjust if necessary. Then set POWER ON TIME/POWER OFF TIME.
Press to display the
SETUP menu screen.
Press to select
SET UP TIMER or
PRESENT TIME
SETUP.
Press to display the
SET UP TIMER
screen or PRESENT
TIME SETUP screen.
1
2
1
2
Display the PRESENT TIME SETUP screen.
To set up PRESENT TIME, follow the procedure described below.
Press...

24
SET UP TIMER
Press to set up POWER ON TIME/
POWER OFF TIME. Press to select
POWER ON TIME/POWER OFF TIME.
1
Press to select POWER ON FUNCTION/
POWER OFF FUNCTION.
Press to select ON.
3 2
Press twice to exit from SETUP.
PRESENT TIME SETUP/SET UP TIMER
Note:
Timer function will not work unless “PRESENT TIME OF DAY” is set. Notes:
 • Pressing “
” 
or “” 
button once changes POWER ON TIME / POWER OFF TIME 1minute.
 • Pressing “
” 
or “” 
button continuously changes POWER ON TIME / POWER OFF TIME by 15...

25
SCREENSAVER (For preventing after-images)
2
3 1
4
Press to display the SETUP menu screen.
Press to select the SCREENSAVER.
Press to select the SCREENSAVER screen.
Press to select the FUNCTION.
Press to select the desired function.
Press to select the MODE.
Press to select each mode items. Do not display a still picture, especially in 4:3 mode, for any length of time.
If the display must remain on, a SCREENSAVER should be used.
MODE selection
NEGATIVE / SCROLL selection
WHITE BAR SCROLL : A white bar...

26
Setup of SCREENSAVER Time
Press to select START TIME/ FINISH TIME
(When TIME OF DAY  is selected).
Press to select SHOW DURATION/ SAVER
DURATION (When INTERVAL  is selected).
Press to set up.
 button: Forward
 button: Back
Note: Timer function will not work unless “PRESENT TIME OF DAY” is set. After selecting TIME OF DAY or INTERVAL, the relevant SET UP TIME will become available for selection and
the OPERATING TIME may be set. (Time cannot be set when “MODE” is “ON” or “OFF.”)
Notes:
 • Pressing “
”...

27
SCREENSAVER (For preventing after-images )
SIDE BAR ADJUST
2
Press to select the
SIDE BAR ADJUST.
Press to select
OFF, DARK, MID, BRIGHT.
1
Do not display a picture in 4:3 mode for an extended period, as
this can cause an after-image to remain on the side bars on
either side of the display field.
To prevent the appearance of such an after-image, change the
brightness of the side bars.
To display the SCREENSAVER screen.
(Refer to the previous page, operation guide steps 1 and 2)side bars
4:3
 
Screen...

28
Digital Zoom
1
32
4
This displays an enlargement of the designated part of the displayed image.
Display the Operation Guide.
Press to access Digital Zoom.
Select the area of the image to be enlarged. The Operation Guide will be displayed.
Press on the enlargement location to select.
The cursor will move.
Return to normal display (quit Digital Zoom).
Press to exit from the Digital Zoom.
Notes:
(1) When power goes OFF (including “Off Timer” operation), Digital Zoom terminates.
(2) The Digital Zoom...

29
Press to select “ON” or “OFF”. Press to select
“POWER SAVE”
“STANDBY SAVE”
“POWER MANAGEMENT”
“AUTO POWER OFF”.
Reduces power consumption
• POWER SAVE: When this function is turned ON, luminous level of the plasma display is suppressed,
so power consumption is reduced.
• STANDBY SAVE: When this function is turned ON, power consumption of the microcomputer is reduced
during power supply standby (see page 12,14,15), so standby power of the set is
reduced.
• POWER MANAGEMENT: The unit power supply is...

30
SET UP for MULTI DISPLAY
 By lining up Plasma Displays in groups of 4 or 9 as illustrated below, an enlarged picture may be displayed across all
screens.
 For this mode of operation, each plasma display has to be set up with a DISPLAY number to determine its location.
Press to display the SETUP menu screen.
Press to display the
“MULTI DISPLAY
SETUP” menu. Press to select the
MULTI DISPLAY SETUP.
1
2
3
Press to select the
MULTI DISPLAY SETUP.
Press to select “ON”
or “OFF”.
How to setup MULTI DISPLAY...