Panasonic Progressive Plasma Television Th 37pa20 Operating Instructions

51
PC MENU
1Press to display the PC menu.
2Press to select PICTURE/PICTURE POS./SIZE/SIGNAL.
To PICTURE adjust menu
(see on this page below)
PC
MENU
ACTIONCH
CH VOL VOL
PICTURE
NORMALIZE
PICTURE  MENU
BRIGHTNESSSTANDARD
0
COLOR  TEMPNORMAL PICTURE25
3
SHARPNESS
NORMAL
To PICTURE POS./SIZE
adjust menu
(see page 52)
NORMAL
PICTURE  POS./SIZE
NORMALIZE
H-POS
H-SIZE
V-POS
V-SIZE
CLOCK  PHASE
To SIGNAL screen
(see page 53)
SIGNAL
SYNC
H
-FREQ.                 kHz
V-FREQ.                  HzH & V
31.5 
60.0...

52
H-POS
H-SIZE
V-POS
V-SIZE
CLOCK PHASE
(RGB/PC in Mode)When the Position Right
“
” 
button is pressed.
When the Position Right
“
” 
button is pressed.
When the Position Right
“
” 
button is pressed.
When the Position Right
“
” 
button is pressed.
When the Position Left
“
” 
button is pressed.
When the Position Left
“
” 
button is pressed.
When the Position Left
“
” 
button is pressed.
When the Position Left
“
” 
button is pressed.
 
Helpful Hint (NORMALIZE 
Normalization)
While the “PICTURE” or...

53
Select SIGNAL from the “PC MENU” menu during PC input signal.
ACTIONCH
CH VOL VOL
Press to select each item.
SIGNAL
SYNC
H
-FREQ.                 kHz
V-FREQ.                  HzH & V
31.5 
60.0
SYNCH & V
SYNC
ON  G
Setting RGB sync signal
Confirm that the input is set to RGB INPUT (this setting is valid only for RGB INPUT
signal).
H & V:
The H and V sync signals are input from the HD/VD connector.
ON G: Uses a synchronized signal on the Video G signal, which is input
from the G connector.
Displays the...

54
Operating peripheral equipment using the remote control
Programming The Illuminated Remote Control Using Access Codes
The Universal Remote Control can be programmed to operate many manufacturers’ components, using the component
function buttons for VCR, DVD, AUX, RCVR, TV, DTV CABLE or DBS. Follow the procedures for programming your
Remote Control with or without a code for the component.
Determine the manufacturer of the component and look in the table for the code.
1Confirm that the external...

55
Programming Without A Code (When the code is not known)
This procedure searches all codes and is called the “sequence method.”
1Confirm that the external component is plugged in and on.
2Turn the component off.
3
TV
DTVCBL
AUXDVD
VCR
DBS
RCVR4
POWER  +  ACTIONCH
CH VOL VOLPress POWER and ACTION together, for at least 5
seconds.
After 5 seconds, all the illuminated mode keys will
begin to flash.
Release the POWER and ACTION key.
Press the mode key.
The mode key will illuminate steadily, all others will...

56
Operating peripheral equipment using the remote control
The remote control is capable of operating many brands of peripheral equipment. Refer to pages 54 and 55 for programming procedures.
Note: The remote control memory is limited and therefore some models may not operate. The remote control is not
designed to control all features available in all models.
Note: After entering the proper infrared code, press the desired Mode Selection Button on the remote control. Refer to
pages 20 and 59 - 60 for...

57
        Brand Code
Panasonic Replay100
Philips Tivo 101
Sony Tivo 102
Codes for Personal Video Recorders
        Brand Code
Denon 100
Ferguson 101
JVC 109
Mitsubishi 105
Nordmende 101
Panasonic 100
Philips 103
Pioneer 102
RCA 101
Codes for DVD
DVD        Brand Code
Saba 101
Samsung 110
Sharp 108
Sony 104
Technics 100
Thomson 101
Toshiba 103
Yamaha 100
Zenith 107
        Brand Code
Admiral 226
Aiwa 233, 235
Carver 229
Denon 242
Emerson 239
Fisher 205
Harman/Kardon 219, 220, 221, 223
Hitachi 207
Jensen...

58
        Brand Code
Admiral 120
Aiwa 125, 126
Denon 134, 135, 136
Fisher 104
Garrard 113
Harman Kardon 115, 123
Jensen 129
JVC 132, 133
Kenwood 100, 108
Magnavox 127
Marantz 124
Mclntosh 116
Nakamichi 106
Onkyo 109, 114
Codes for Receivers
        Brand Code
Optimus 103, 127, 130, 131
Panasonic 118, 119, 121
Philips 123
Pioneer 105, 107
Quasar 118, 119, 121
RCA 103, 105, 127, 130, 131
Sansui 103, 111, 139
Sharp 134, 137
Sony 122
Soundesign 138
Teac 111, 112, 113
Technics 118, 119, 121
Victor 132, 133...

59
Operating peripheral equipment using the remote control
Mode Operational Key Chart
This chart defines which keys are operational after programming (if needed), while in the selected remote control mode TV,
DTV, CABLE, DBS, VCR, DVD ...etc.
   KEY NAME DTV MODE  CABLE MODE DBS MODE VCR MODE
DTV POWER CABLE POWER DBS POWER VCR POWER
DTV SAP---
TV MUTE CABLE MUTE TV MUTE TV MUTE
DTV ASPECT-DBS ASPECT-
TV INPUT SW TV INPUT SW TV INPUT SW TV INPUT SW
REMOTE BUTTONS REMOTE BUTTONS REMOTE BUTTONS REMOTE...

60
Operating peripheral equipment using the remote control
DVD MODE AUX MODE
KEY NAMERCVR MODE
(DVD) (CD) (VCR2) (PVR) (TAPE)
DVD POWER CD POWER VCR POWER PVR POWER TAPE POWER RCVR POWER
------
TV MUTE RCVR MUTE TV MUTE TV MUTE RCVR MUTE RCVR MUTE
------
TV INPUT SW TV INPUT SW TV INPUT SW TV INPUT SW TV INPUT SW RCVR INPUT SW
REMOTE BUTTONS REMOTE BUTTONS REMOTE BUTTONS REMOTE BUTTONS REMOTE BUTTONS REMOTE BUTTONS
-TUNER -/+
DVD SELECT-TV ACTION---
TV VOLUME -/+RCVR VOLUME -/+ RCVR VOLUME -/+
DVD...