Panasonic P2 Streaming Server Arbitratior Installation Guide

E-10
ENGLISH
5. Adding a New P2 
Device
To connect a new P2 card or P2 device to a
personal computer in which P2 software is
already installed, use the procedure
described in “4. Installation of the P2
Software” to perform an overwrite
installation of the P2 software. 
During the overwrite installation, the
window shown in Figure 17 appears, but
the License Agreement box shown in
Figure 6 does not reappear. 
In this window, check “Repair”, then click
“Next”. 
After following the instructions displayed...

E-11

zIf you uninstall the software, all the
information installed until now will be
deleted so, if you install the software
again, you will need to install the drivers
for all the devices that you will use. We
recommend checking the current
information before uninstallation. Refer to
“7. Checking the Installed Devices” for
the procedure for checking.
zIf the OS of the personal computer is
Windows Vista Business, the dialogue
box shown in Figure 18 may appear
when you uninstall the P2 driver. In this...

E-12
ENGLISH
8. Setting the internal 
P2 drive
To use a personal computer in which the P2
drive is incorporated in the 5-inch bay,
install the P2 card software, connect the P2
drive to the personal computer, then
perform the following setting: 
1For Windows Vista Business/
Windows XP Professional,
select the following: “Start” > “All
Programs” > “Panasonic P2” > “Set
P2 Drive Settings” > “Enable Internal
Drive”. 
For Windows 2000, 
select the following: “Start” >
“Program” > “Panasonic P2” > “Set
P2...

E-13
9. Checking the Installation Status of the P2 
Driver 
When the standard driver is installed via the
Found New Hardware Wizard box (Figure
1), or when the P2 driver is uninstalled for
some reason, the P2 device does not
operate properly. 
If any of the following events occurs, check
that the P2 driver is properly installed; if it is
not, reinstall it. 
zP2 card or P2 device is not recognized. 
zReading from the P2 card or P2 device
cannot be performed. 
zWriting to the P2 card or P2 device
cannot be...

E-14
ENGLISH
1Check the P2 device driver display. 
Checking the P2 card driver 
“IDE ATA/ATAPI controllers” - 
“Panasonic P2 Card” is set. 
“P2 Disk Drive” - “P2Card Series
Cached Disk” is set. Checking the P2 USB devices drivers 
“Universal Serial Bus controllers” -
“Panasonic P2 Series USB Device” is
set. 
Figure 21
P2 card driver 
P2 devices drivers
P2Installer(VQT0L24-8)_E_F_C_J.book  14 ページ  ２００８年２月１２日　火曜日　午後１時５０分 

E-15
Checking the P2 card 1394b driver
For Windows XP Professional,
Click  “MATSHITA AJ-PCD20 #1 IEEE 1394 SBP2 Device”  listed under “Disk drives,”
then click on the “Driver” tab in the  “MATSHITA AJ-PCD20 #5 IEEE 1394 SBP2
Device” property panel. “Provider” - “Panasonic” is set.
Figure 22
P2 devices 1394b 
drivers
P2Installer(VQT0L24-8)_E_F_C_J.book  15 ページ  ２００８年２月１２日　火曜日　午後１時５０分 

E-16
ENGLISH
For Windows Vista Business,
Click “P2 SBP2 Device”. There are 5 items displayed from “MATSHITA AJ-PCD20 #1
IEEE 1394 SBP2 Device” to “MATSHITA AJ-PCD20 #5 IEEE 1394 SBP2 Device”.
Figure 23
P2 devices 1394b 
drivers
P2Installer(VQT0L24-8)_E_F_C_J.book  16 ページ  ２００８年２月１２日　火曜日　午後１時５０分 

E-17
10. Checking the 
Version of the P2 
Driver
For Windows Vista Business,
select: “Control Panel”  > “Programs” >
“Programs and Features“ > “View” >
“Details”. Press the “Alt” key to display the
menu, select “Display settings“ in the “View”
menu, check the “Version” check box and
click the “OK” button to display the version.
For Windows XP Professional,
in the “Add or Remove Programs” window
in Control Panel, select “Panasonic P2
Drivers”, then refer to the support
information. 
For Windows 2000, 
in...

E-18
ENGLISH

Passwords for protecting card names can
be controlled from this screen. 
1) Click the “Change Password” button, and
enter the old and new passwords. 
Enter the current password in the “Old
Password” column. 
Enter a new password in the “New
Password” column, and enter the same
new password in the “New Password
Confirm” column. 
2) Click the “OK” button to confirm the
change.  Click the “OK” button when the
“Successfully changed.  When you eject,
..... information may be shown.” message
is...

Panasonic Broadcast & Television Systems Company
Unit Company of Panasonic Corporation of North America
Executive Office:One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7000
EASTERN ZONE:One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7196
Southeast Region: (201) 348-7162
WESTERN ZONE:
3330 Cahuenga Blvd W., Los Angeles, CA 90068 (323) 436-3500
Government Marketing Department:One Panasonic Way 2E-10, Secaucus, NJ 07094 (201) 348-7587
Broadcast PARTS INFORMATION & ORDERING:9:00 a.m. – 5:00 p.m....