Panasonic P2 Streaming Server Arbitratior Installation Guide

							E-10
ENGLISH
5. Adding a New P2 
Device
To connect a new P2 card or P2 device to a
personal computer in which P2 software is
already installed, use the procedure
described in “4. Installation of the P2
Software” to perform an overwrite
installation of the P2 software. 
During the overwrite installation, the
window shown in Figure 17 appears, but
the License Agreement box shown in
Figure 6 does not reappear. 
In this window, check “Repair”, then click
“Next”. 
After following the instructions displayed on
the screen, restart the personal computer.
Figure 17

The above screen will be displayed when
the installed P2 software and the installer
have the same version.
6. Uninstallation of 
the P2 Software
To uninstall the P2 software, use the
following procedure: 
For Windows Vista Business,
in the “Programs and Features” window in
the “Programs” window in Control Panel,
select “Panasonic P2 Drivers”, then click
“Uninstall”.
For Windows XP Professional,
in the “Add or Remove Programs” window
in Control Panel, select “Panasonic P2
Drivers”, then click “Remove”.
For Windows 2000, 
in the “Add/Delete Applications” window in
Control Panel, select “Panasonic P2
Drivers”, then click “Remove”.
After following the instructions displayed on
the screen to complete the uninstallation,
follow the on-screen instructions to restart
the personal computer. 
P2Installer(VQT0L24-8)_E_F_C_J.book  10 ページ  ２００８年２月１２日　火曜日　午後１時５０分 
						

							E-11

zIf you uninstall the software, all the
information installed until now will be
deleted so, if you install the software
again, you will need to install the drivers
for all the devices that you will use. We
recommend checking the current
information before uninstallation. Refer to
“7. Checking the Installed Devices” for
the procedure for checking.
zIf the OS of the personal computer is
Windows Vista Business, the dialogue
box shown in Figure 18 may appear
when you uninstall the P2 driver. In this
case, click the “OK” button.
Figure 18
7. Checking the 
Installed Devices
To check which devices have a driver
installed, use an installer that is the same
version as the P2 software currently
installed and follow the procedure
described in “4. Installation of the P2
Software” to perform an overwrite
installation.
If you start the installation, then click “Next”,
the window shown in Figure 17 (on Page
10) appears. In this window, check “Repair”,
then click “Next”. If you follow the
instructions displayed on the screen, the
window shown in Figure 19 appears. 
In this window, you can check which
devices have a driver installed  by checking
if “Installed” is displayed. 
After checking, click “Cancel” to close the
window.
Figure 19
P2Installer(VQT0L24-8)_E_F_C_J.book  11 ページ  ２００８年２月１２日　火曜日　午後１時５０分 
						

							E-12
ENGLISH
8. Setting the internal 
P2 drive
To use a personal computer in which the P2
drive is incorporated in the 5-inch bay,
install the P2 card software, connect the P2
drive to the personal computer, then
perform the following setting: 
1For Windows Vista Business/
Windows XP Professional,
select the following: “Start” > “All
Programs” > “Panasonic P2” > “Set
P2 Drive Settings” > “Enable Internal
Drive”. 
For Windows 2000, 
select the following: “Start” >
“Program” > “Panasonic P2” > “Set
P2 Drive Settings” > “Enable Internal
Drive”. 
2The box shown in Figure 20 appears. 
Click “OK”. 
Figure 20
P2Installer(VQT0L24-8)_E_F_C_J.book  12 ページ  ２００８年２月１２日　火曜日　午後１時５０分 
						

							E-13
9. Checking the Installation Status of the P2 
Driver 
When the standard driver is installed via the
Found New Hardware Wizard box (Figure
1), or when the P2 driver is uninstalled for
some reason, the P2 device does not
operate properly. 
If any of the following events occurs, check
that the P2 driver is properly installed; if it is
not, reinstall it. 
zP2 card or P2 device is not recognized. 
zReading from the P2 card or P2 device
cannot be performed. 
zWriting to the P2 card or P2 device
cannot be performed. 
zImage frame dropping occurs frequently
during playback from the P2 card or P2
device, indicating that there is a
performance problem. 
How to check the P2 driver

When checking that the P2 driver is
properly installed, be sure to connect the
appropriate device to the personal
computer. Devices not connected to the
personal computer cannot be checked
using the following method: 
For Windows Vista Business,
select: “Start” > “Control Panel” >
“System and Maintenance”. Click on Device
Manager.
For Windows XP Professional,
select: “Start” > “Control Panel” >
“System”. The System Properties window
appears. Select the Hardware tab, then
click on Device Manager. 
For Windows 2000, 
select: “Start” > “Settings” > “Control
Panel” > “System”. The System Properties
window appears. Select the Hardware tab,
then click on Device Manager. 
P2Installer(VQT0L24-8)_E_F_C_J.book  13 ページ  ２００８年２月１２日　火曜日　午後１時５０分 
						

							E-14
ENGLISH
1Check the P2 device driver display. 
Checking the P2 card driver 
“IDE ATA/ATAPI controllers” - 
“Panasonic P2 Card” is set. 
“P2 Disk Drive” - “P2Card Series
Cached Disk” is set. Checking the P2 USB devices drivers 
“Universal Serial Bus controllers” -
“Panasonic P2 Series USB Device” is
set. 
Figure 21
P2 card driver 
P2 devices drivers
P2Installer(VQT0L24-8)_E_F_C_J.book  14 ページ  ２００８年２月１２日　火曜日　午後１時５０分 
						

							E-15
Checking the P2 card 1394b driver
For Windows XP Professional,
Click  “MATSHITA AJ-PCD20 #1 IEEE 1394 SBP2 Device”  listed under “Disk drives,”
then click on the “Driver” tab in the  “MATSHITA AJ-PCD20 #5 IEEE 1394 SBP2
Device” property panel. “Provider” - “Panasonic” is set.
Figure 22
P2 devices 1394b 
drivers
P2Installer(VQT0L24-8)_E_F_C_J.book  15 ページ  ２００８年２月１２日　火曜日　午後１時５０分 
						

							E-16
ENGLISH
For Windows Vista Business,
Click “P2 SBP2 Device”. There are 5 items displayed from “MATSHITA AJ-PCD20 #1
IEEE 1394 SBP2 Device” to “MATSHITA AJ-PCD20 #5 IEEE 1394 SBP2 Device”.
Figure 23
P2 devices 1394b 
drivers
P2Installer(VQT0L24-8)_E_F_C_J.book  16 ページ  ２００８年２月１２日　火曜日　午後１時５０分 
						

							E-17
10. Checking the 
Version of the P2 
Driver
For Windows Vista Business,
select: “Control Panel”  > “Programs” >
“Programs and Features“ > “View” >
“Details”. Press the “Alt” key to display the
menu, select “Display settings“ in the “View”
menu, check the “Version” check box and
click the “OK” button to display the version.
For Windows XP Professional,
in the “Add or Remove Programs” window
in Control Panel, select “Panasonic P2
Drivers”, then refer to the support
information. 
For Windows 2000, 
in the “Add/Delete Applications” window in
Control Panel, select “Panasonic P2
Drivers”, then refer to the support
information.
11. P2 Card Manager
After P2 software installation, the “P2 Card
Manager” icon will be added to the control
panel and task bar. 
Card names and passwords can be set for
the P2 cards by using the “P2 Card
Manager”.
Start the “P2 Card Manager” and select the
desired P2 card from the recognized P2
cards, the “Change Card Name” and
“Change Password” buttons will be
enabled. After clicking the “Refresh” button,
the latest information on the P2 card will be
determined and displayed. 
(Card names and passwords for unused P2
cards are not set.)

If the P2 card cannot be written to because
the write protect switch is set to
“PROTECT” etc, the card name and
password cannot be set.

Card names can be changed from this
screen.  A password is required for the
change. 
No password is set when a new P2 card is
inserted.  Be sure to use the required
password for P2 cards that are inserted and
use a password. 
1) Click the “Change Card Name” button,
and enter the password and the card
name.
2) After clicking the “OK” button, the card
name can be changed.  Pressing the
“Cancel” button returns the user to the
“P2 Card Manager” screen without
changing the card name.
P2Installer(VQT0L24-8)_E_F_C_J.book  17 ページ  ２００８年２月１２日　火曜日　午後１時５０分 
						

							E-18
ENGLISH

Passwords for protecting card names can
be controlled from this screen. 
1) Click the “Change Password” button, and
enter the old and new passwords. 
Enter the current password in the “Old
Password” column. 
Enter a new password in the “New
Password” column, and enter the same
new password in the “New Password
Confirm” column. 
2) Click the “OK” button to confirm the
change.  Click the “OK” button when the
“Successfully changed.  When you eject,
..... information may be shown.” message
is displayed. 
3) Pressing the “Cancel” button returns the
user to the “P2 Card Manager” screen. 
4) After the password change, the P2 card
information whose password has been
changed will disappear from the “P2
Card Manager” screen.  Remove the P2
card. 
12. Software for each 
P2 device
After installation of the P2 software,
software for each P2 device will be installed
simultaneously. For software for each
device, refer to the instruction manual of the
respective software. 
P2Installer(VQT0L24-8)_E_F_C_J.book  18 ページ  ２００８年２月１２日　火曜日　午後１時５０分 
						

							Panasonic Broadcast & Television Systems Company
Unit Company of Panasonic Corporation of North America
Executive Office:One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7000
EASTERN ZONE:One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7196
Southeast Region: (201) 348-7162
WESTERN ZONE:
3330 Cahuenga Blvd W., Los Angeles, CA 90068 (323) 436-3500
Government Marketing Department:One Panasonic Way 2E-10, Secaucus, NJ 07094 (201) 348-7587
Broadcast PARTS INFORMATION & ORDERING:9:00 a.m. – 5:00 p.m. (EST) (800) 334-4881/24 Hr. Fax (800) 334-4880
Emergency after hour parts orders (800) 334-4881
TECHNICAL SUPPORT:Emergency 24 Hour Service (800) 222-0741
Panasonic Canada Inc.5770 Ambler Drive, Mississauga, Ontario L4W 2T3 (905) 624-5010
Panasonic de Mexico S.A. de C.V.Av angel Urraza Num. 1209 Col. de Valle 03100 Mexico, D.F. (52) 1 951 2127
Panasonic Puerto Rico Inc.San Gabriel Industrial Park, 65th Infantry Ave., Km. 9.5, Carolina, Puerto Rico 00630 (787) 750-4300