Panasonic Network Function Edition Pt L785u Instruction Manual
Have a look at the manual Panasonic Network Function Edition Pt L785u Instruction Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 6
6
Using Web Browser Control
Access procedure
Start the web browser on your PC, then enter the IP
address which was set in the projector.
Enter “user1” in the user name field, then enter the
password in the password field.
Click [OK].
The Basic Control page is displayed. The default setting is “panasonic” (all lower case). If you have changed the
password, enter the new password here. If you forget your password, set a
new password using the procedure described on page 4.
The host name set in the...](http://img.usermanuals.tech/thumb/58/75959/w64_pt-l785u-network_en_om_d-5.png "Page 6
6
Using Web Browser Control
Access procedure
Start the web browser on your PC, then enter the IP
address which was set in the projector.
Enter “user1” in the user name field, then enter the
password in the password field.
Click [OK].
The Basic Control page is displayed. The default setting is “panasonic” (all lower case). If you have changed the
password, enter the new password here. If you forget your password, set a
new password using the procedure described on page 4.
The host name set in the...")
![Page 7
7
Basic control page
This page is the first page displayed when the projector is accessed through a web
browser.
To move from another page, click [Projector Control], then [Basic control].
Input channel switching
Video mode selection
Shutter control
Power ON/OFF control
Lamp power switching
Volume control
(+: increase volume;
–: lower volume)](http://img.usermanuals.tech/thumb/58/75959/w64_pt-l785u-network_en_om_d-6.png "Page 7
7
Basic control page
This page is the first page displayed when the projector is accessed through a web
browser.
To move from another page, click [Projector Control], then [Basic control].
Input channel switching
Video mode selection
Shutter control
Power ON/OFF control
Lamp power switching
Volume control
(+: increase volume;
–: lower volume)")
![Page 8
8
Using Web Browser Control (continued)
Detail control page
Click [Projector Control], then [Detail control] to display the Detail control page.
AUTO SETUP start button
Picture adjustment
(contrast, bright, color, and
sharpness)
Rough adjustment,
fine adjustment
Position adjustment
(horizontal and vertical)
Rough adjustment,
fine adjustment
Keystone distortion correction
(horizontal and vertical)
Rough adjustment,
fine adjustment](http://img.usermanuals.tech/thumb/58/75959/w64_pt-l785u-network_en_om_d-7.png "Page 8
8
Using Web Browser Control (continued)
Detail control page
Click [Projector Control], then [Detail control] to display the Detail control page.
AUTO SETUP start button
Picture adjustment
(contrast, bright, color, and
sharpness)
Rough adjustment,
fine adjustment
Position adjustment
(horizontal and vertical)
Rough adjustment,
fine adjustment
Keystone distortion correction
(horizontal and vertical)
Rough adjustment,
fine adjustment")
![Page 9
9
Status information page
Click [Projector Control], then [Status information] to display the Status information page.
POWER: ON and OFF
VOLUME: 0 to 20
INTERNAL TEMPERATURE:
Good, Warning and Caution
LAMP RUNTIME: 0 to 1500 hours
PROJECTOR TYPE: L785
VERSION: Projector firmware
version displayINPUT: RGB1, RGB2, RGB3, DVI,
VIDEO and S-VIDEO
LAMP POWER: HIGH and LOW
SET RUNTIME: 0 to 2000 hours
SELF TEST: No Errors and ErrorWhen
is
displayed, refer to the
next page.](http://img.usermanuals.tech/thumb/58/75959/w64_pt-l785u-network_en_om_d-8.png "Page 9
9
Status information page
Click [Projector Control], then [Status information] to display the Status information page.
POWER: ON and OFF
VOLUME: 0 to 20
INTERNAL TEMPERATURE:
Good, Warning and Caution
LAMP RUNTIME: 0 to 1500 hours
PROJECTOR TYPE: L785
VERSION: Projector firmware
version displayINPUT: RGB1, RGB2, RGB3, DVI,
VIDEO and S-VIDEO
LAMP POWER: HIGH and LOW
SET RUNTIME: 0 to 2000 hours
SELF TEST: No Errors and ErrorWhen
is
displayed, refer to the
next page.")
![Page 10
10
Using Web Browser Control (continued)
Error information page
When is displayed on the status information screen, click it
to display the error details.
Items checked for errors[OK]: Normal
[FAILED]: Error
Note:
In the case of some errors, the standby status is established in order to protect the
projector. WEB STANDBY must be set to [ON] to display the error information
page. (See page 4.)](http://img.usermanuals.tech/thumb/58/75959/w64_pt-l785u-network_en_om_d-9.png "Page 10
10
Using Web Browser Control (continued)
Error information page
When is displayed on the status information screen, click it
to display the error details.
Items checked for errors[OK]: Normal
[FAILED]: Error
Note:
In the case of some errors, the standby status is established in order to protect the
projector. WEB STANDBY must be set to [ON] to display the error information
page. (See page 4.)")
![Page 11
11
When [FAILED] has appeared for an item:
If requesting service, ask your nearest Authorised Service Center.
EXHAUST
TEMPERATUREThe air exhaust temperature is too high. The air outlet or
exhaust holes may be blocked.
LAMP REMAIN
TIMEThe lamp runtime has exceeded the prescribed cumulative
time, and it is now time to replace the lamp.
LAMP STATUS Trouble has occurred in the lamp or its drive circuit.
INPUT AIR
TEMP.
SENSORTrouble has occurred in the sensor used to detect the input
air temperature....](http://img.usermanuals.tech/thumb/58/75959/w64_pt-l785u-network_en_om_d-10.png "Page 11
11
When [FAILED] has appeared for an item:
If requesting service, ask your nearest Authorised Service Center.
EXHAUST
TEMPERATUREThe air exhaust temperature is too high. The air outlet or
exhaust holes may be blocked.
LAMP REMAIN
TIMEThe lamp runtime has exceeded the prescribed cumulative
time, and it is now time to replace the lamp.
LAMP STATUS Trouble has occurred in the lamp or its drive circuit.
INPUT AIR
TEMP.
SENSORTrouble has occurred in the sensor used to detect the input
air temperature....")
![Page 12
12
Using Web Browser Control (continued)
E-mail setup page
With this projector, if a problem occurs or if the lamp usage time reaches a set
value, an e-mail message can be sent to one or more preset e-mail addresses
(maximum two addresses). Click [Projector Control], then [E-mail set up] to display
the E-mail setup page.
Minimum sending interval
field (applies only to
temperature warnings) E-mail Enable/Disable toggling SMTP server field
Set temperature selection
(38 °C/100 °F, 40 °C/104 °F,
42 °C/108...](http://img.usermanuals.tech/thumb/58/75959/w64_pt-l785u-network_en_om_d-11.png "Page 12
12
Using Web Browser Control (continued)
E-mail setup page
With this projector, if a problem occurs or if the lamp usage time reaches a set
value, an e-mail message can be sent to one or more preset e-mail addresses
(maximum two addresses). Click [Projector Control], then [E-mail set up] to display
the E-mail setup page.
Minimum sending interval
field (applies only to
temperature warnings) E-mail Enable/Disable toggling SMTP server field
Set temperature selection
(38 °C/100 °F, 40 °C/104 °F,
42 °C/108...")
![Page 14
14
Using Web Browser Control (continued)
Primary DNS server address
Available input characters:
Numbers (0 - 9), period (.)
(ex. ...)
DNS server setup page
Click [Network Setting], then [DNS Server set up] to display the DNS Server Setup
page.
Button to update settings Secondary DNS server address
Available input characters:
Numbers (0 - 9), period (.)
(ex. ...)](http://img.usermanuals.tech/thumb/58/75959/w64_pt-l785u-network_en_om_d-13.png "Page 14
14
Using Web Browser Control (continued)
Primary DNS server address
Available input characters:
Numbers (0 - 9), period (.)
(ex. ...)
DNS server setup page
Click [Network Setting], then [DNS Server set up] to display the DNS Server Setup
page.
Button to update settings Secondary DNS server address
Available input characters:
Numbers (0 - 9), period (.)
(ex. ...)")
![Page 15
15
POP server setup page
Click [Network Setting], then [POP server set up] to display the POP Server Setup
page.
Toggling between
Enabling/Disabling
POP before SMTPPOP server name field
Available input characters:
Alphanumeric characters (A–Z, a–z, 0–9),
hyphen (-), period (.)
Button to update settings POP server
password field POP server user
name field](http://img.usermanuals.tech/thumb/58/75959/w64_pt-l785u-network_en_om_d-14.png "Page 15
15
POP server setup page
Click [Network Setting], then [POP server set up] to display the POP Server Setup
page.
Toggling between
Enabling/Disabling
POP before SMTPPOP server name field
Available input characters:
Alphanumeric characters (A–Z, a–z, 0–9),
hyphen (-), period (.)
Button to update settings POP server
password field POP server user
name field")
![Page 16
16
Using Web Browser Control (continued)
Adjust clock page
Click [Network Setting], then [Adjust clock] to display the Adjust clock page.
Time zone selection Button to update time
zone setting
Button to update time
and date settings New date field
New time field
Note:
If the time becomes incorrect immediately after setting the correct time, then the
battery needs to be changed. Contact the dealer where you bought the projector
to have the battery changed.](http://img.usermanuals.tech/thumb/58/75959/w64_pt-l785u-network_en_om_d-15.png "Page 16
16
Using Web Browser Control (continued)
Adjust clock page
Click [Network Setting], then [Adjust clock] to display the Adjust clock page.
Time zone selection Button to update time
zone setting
Button to update time
and date settings New date field
New time field
Note:
If the time becomes incorrect immediately after setting the correct time, then the
battery needs to be changed. Contact the dealer where you bought the projector
to have the battery changed.")
11 When [FAILED] has appeared for an item: If requesting service, ask your nearest Authorised Service Center. EXHAUST TEMPERATUREThe air exhaust temperature is too high. The air outlet or exhaust holes may be blocked. LAMP REMAIN TIMEThe lamp runtime has exceeded the prescribed cumulative time, and it is now time to replace the lamp. LAMP STATUS Trouble has occurred in the lamp or its drive circuit. INPUT AIR TEMP. SENSORTrouble has occurred in the sensor used to detect the input air temperature. EXHAUST TEMP. SENSORTrouble has occurred in the sensor used to detect the exhaust temperature. BATTERY The backup battery has been run out. Item FAN INPUT AIR TEMPERATUREThe input air temperature is too high. It may be that the projector is being used where the ambient temperature is high such as near a heating appliance. Trouble has occurred in the fan or its drive circuit. The network functions are disabled when the standby status has been established by this error.Description
12 Using Web Browser Control (continued) E-mail setup page With this projector, if a problem occurs or if the lamp usage time reaches a set value, an e-mail message can be sent to one or more preset e-mail addresses (maximum two addresses). Click [Projector Control], then [E-mail set up] to display the E-mail setup page. Minimum sending interval field (applies only to temperature warnings) E-mail Enable/Disable toggling SMTP server field Set temperature selection (38 °C/100 °F, 40 °C/104 °F, 42 °C/108 °F and 44 °C/111 °F) Memo field (alphanumeric characters)Sender field (alphanumeric characters)
13 Change lamp usage time set value ON/OFF toggling for permission to send e-mail based on lamp usage timePeriodic warning interval setting (e-mail is sent on the checked days of the week/times) Button to update settings Destination e-mail address field The settings for e-mail address 1 are the same.ON/OFF toggling for permission to send e-mail when error occurs ON/OFF toggling for permission to send e- mail based on air intake sensor temperature
14 Using Web Browser Control (continued) Primary DNS server address Available input characters: Numbers (0 - 9), period (.) (ex. ...) DNS server setup page Click [Network Setting], then [DNS Server set up] to display the DNS Server Setup page. Button to update settings Secondary DNS server address Available input characters: Numbers (0 - 9), period (.) (ex. ...)
15 POP server setup page Click [Network Setting], then [POP server set up] to display the POP Server Setup page. Toggling between Enabling/Disabling POP before SMTPPOP server name field Available input characters: Alphanumeric characters (A–Z, a–z, 0–9), hyphen (-), period (.) Button to update settings POP server password field POP server user name field
16 Using Web Browser Control (continued) Adjust clock page Click [Network Setting], then [Adjust clock] to display the Adjust clock page. Time zone selection Button to update time zone setting Button to update time and date settings New date field New time field Note: If the time becomes incorrect immediately after setting the correct time, then the battery needs to be changed. Contact the dealer where you bought the projector to have the battery changed.
17 Network status page Click [Network Setting], then [Network status] to display the Network status page. Network software version display Set IP address display Set subnet mask display MAC address display Network status display
18 Using Web Browser Control (continued) Password change page This page can be used to change the password entered on page 6. The password can be changed even through the PC. See page 4 for information on changing the password through the projector. Click [Change Password]. Old password input field New password input field New password input field (re-enter for confirmation) Button for executing password change Button for erasing all entered characters
M0604-0 Professional/Industrial Video Panasonic Broadcast & Television Systems Company Division of Matsushita Electric Corporation of America One Panasonic Way 4E-7 Secaucus, NJ 07094 (201) 392-4443 3330 Cahuenga Blvd West Los Angels, CA 90068 (323) 436-3500 Technical Support: (800) 524-1448 (800) 526-6610 FAX: (201) 392-6514 E-Mail: [email protected] © 2004 Matsushita Electric Industrial Co., Ltd. All Rights Reserved. Printed in Japan