Panasonic Network Function Edition Pt L785u Instruction Manual

TQBJ0158
Network Function Edition
(PT-L785U)
This projector has networking functions which allow it to be
controlled through a web browser on a PC. 
The controlled items are:
• Projector’s settings and adjustment
• Projector’s status display
• Transmission of a E-mail message when the projector has a
problem 

2
Contents
Connecting a PC ..................................................3
System requirements ...............................................3
Connection example ................................................3
Projector Settings ................................................4
Network settings screen ..........................................4
Network status screen .............................................5
Using Web Browser Control ...............................6
Access procedure...

3
Connecting a PC
Note:
Note that operation is not guaranteed when used with system environments
other than the above or on homemade computers.
Note:
Touching the LAN port with your hand (or body) when you are carrying a static
charge may damage the equipment due to a discharge of static electricity.
Therefore, be careful not to touch the LAN port or metal parts of the LAN cable.
Operation is not guaranteed for all computers that
meet the above conditions.
System requirements
The following system...

4
Projector Settings
Network settings screen
NETWORK
NETWORK
HOSTNAME
WEB CONTROL
WEB STANDBY
WEB PASSWORD
MAC ADDRESSLAN1
PROJECTOR
OFF                  ON
OFF                  ON
00 : 0B : 97 : 41 : 00 : 00
SELECT : [    ] [    ] ENTER : [ENTER]
ESC : [MENU]Press the [MENU] button.
The menu screen appears.1
Use the [      ] buttons to display
the Network Settings screen, then
press the [ENTER] button.2
Use the [       ] buttons to select a
parameter, then change its setting.3
WEB
CONTROL
WEB
STANDBYUse...

5
Network status screen
NETWORK
ID
DHCP
IP ADDRESS
SUBNET MASK
GATEWAY
                      ENTERLAN1
OFF                  ON
192.168.0.8
255.255.255.0
192.168.0.254
ESC
SELECT : [    ] [    ] ENTER : [ENTER]
ESC : [MENU]Select [NETWORK] on the screen
discussed on the preceding page,
then press the [ENTER] button.1
Use the [       ] buttons to select a
parameter, then change its setting.2
IP 
ADDRESS
SUBNET
MASKEnter settings in these parameters if you are not using a DHCP
server.
1. Select a parameter,...

6
Using Web Browser Control 
Access procedure
Start the web browser on your PC, then enter the IP
address which was set in the projector.
Enter “user1” in the user name field, then enter the
password in the password field.
Click [OK]. 
The Basic Control page is displayed. The default setting is “panasonic” (all lower case). If you have changed the
password, enter the new password here. If you forget your password, set a
new password using the procedure described on page 4. 
The host name set in the...

7
Basic control page
This page is the first page displayed when the projector is accessed through a web
browser.
To move from another page, click [Projector Control], then [Basic control]. 
Input channel switching 
Video mode selection
Shutter control 
Power ON/OFF control 
Lamp power switching
Volume control 
(+: increase volume;
–: lower volume) 

8
Using Web Browser Control (continued)
Detail control page 
Click [Projector Control], then [Detail control] to display the Detail control page.
AUTO SETUP start button 
Picture adjustment
(contrast, bright, color, and
sharpness)
Rough adjustment, 
fine adjustment 
Position adjustment
(horizontal and vertical)
Rough adjustment, 
fine adjustment 
Keystone distortion correction
(horizontal and vertical)
Rough adjustment, 
fine adjustment  

9
Status information page
Click [Projector Control], then [Status information] to display the Status information page.
POWER: ON and OFF
VOLUME: 0 to 20
INTERNAL TEMPERATURE: 
Good, Warning and Caution
LAMP RUNTIME: 0 to 1500 hours 
PROJECTOR TYPE: L785
VERSION: Projector firmware
version displayINPUT: RGB1, RGB2, RGB3, DVI,
VIDEO and S-VIDEO
LAMP POWER: HIGH and LOW
SET RUNTIME: 0 to 2000 hours
SELF TEST: No Errors and ErrorWhen 
is
displayed, refer to the
next page. 

10
Using Web Browser Control (continued)
Error information page 
When  is displayed on the status information screen, click it
to display the error details.
Items checked for errors[OK]: Normal
[FAILED]: Error
Note: 
In the case of some errors, the standby status is established in order to protect the
projector. WEB STANDBY must be set to [ON] to display the error information
page. (See page 4.)