Panasonic Network Camera Wv Sw132 Wv Sf135 Installation Guide

21
Adjustment
z  Adjust the camera angle.
  When determining the camera angle, repeat fine adjustments by gradually moving the panning 
table and tilting table. 
	 •	 Attach	the	lens	adjuster	(accessory)	to	the	lens	and	adjust	the	direction	of	the	lens.	Attach	the	 wider end of the lens adjuster to the lens.
	 •	 Do	not	touch	the	lens	with	your	hand	when	making	adjustments.
	 •	 Make	 adjustments	 to	 the	 direction	 of	 the	 lens	 while	 confirming	 the	 picture	 displayed	 on	 com- puter's...

22
Note:
	 •	 Depending	on	the	vertical/horizontal	angle	used,	the	edges	of	the	camera	may	be	projected.	
	 •	 Use	 Extra	 Zoom	 when	 you	 want	 to	 adjust	 the	 angular	 field	 of	 view	 on	 the	 "Tele"	 side.	 When	 VGA or a lower resolution is selected, the angular field of view can be adjusted without\
 deterio-
ration in the image quality. 
SF135
	 •	 If	 the	 2x	 extra	 zoom	 is	 applied	 when	 "1280x960"	 is	 selected	 for	 the	 image	 capture	 size,	 the	image quality will be...

23
z  Attach the dome cover to the camera with 2 dome cover fixing screws (M3) and the hook.
Dome cover fixing screws
Dome cover
fixing screws
■ Ceiling ■ Wall
x  Close the screw cover.
c  Remove the cover film completely.
Important:
	 •	 When	attaching	the	dome	cover	the	focus	may	be	slightly	disturbed.	If	this	occurs,	remove	the	 dome cover and make the necessary adjustments.
	 •	 Before	attaching	the	dome	cover,	make	sure	that	the	subject	is	present.	
	 •	 Securely	tighten	all	the	fixing	screws	(x2)...

24
About the CD launcher
Insert the provided CD-ROM into the CD-ROM drive of your PC to display the CD launche\
r window.
	 •	 If	 the	 launcher	 window	 is	 not	 displayed,	 double	 click	 the	 "CDLauncher.exe"	 file	 on	 the	CD-ROM.
q
e
t
w
r
Using the supplied CD-ROM, the following actions can be performed.
 q  The Panasonic IP setting software can be installed on the PC.
   → Refer to "Installing Panasonic IP setting software". (☞ Page 25)
  w  Settings related to the camera's...

25
Installing Panasonic IP setting software
On the CD launcher window, click the [Install] button next to [IP Setting Software] to display the 
Panasonic IP setting software installation window. Confirm the following settings before starting the 
installation.
qw
e
r
  q  Select the Panasonic IP setting software to install.
  w  Select where to create the Panasonic IP setting shortcut icon when the Panasonic IP settin\
g 
software is installed.
  e  Specify which folder on the PC to install the Panasonic...

26
Installing the manuals
On the CD launcher window, click the [Install] button next to [Manual] to display the Manual inst\
alla-
tion window. Confirm the following settings before starting the installation.
q
e w
t
r
  q  Select which manuals to install. The camera models that the manuals supp\
ort are displayed in 
w "Supported Camera Models".
  w  The camera models that are supported by the manuals selected in q are displayed here.
  e  Select where to create the manuals shortcut icon when...

27
Configure the network settings of the camera using the 
Panasonic IP setting software
It is possible to perform the network settings of the camera using the I\
P setup software on the pro-
vided CD-ROM. When using multiple cameras, it is necessary to configure the network settings of 
each camera independently. 
If the Panasonic IP setting software does not work, configure the network settings of the camera 
and the PC individually on the "Network" page of the setup menu. Refer t\
o the...

28
Note:
	 •	 When	using	a	DHCP	server,	the	IP	address	assigned	to	the	camera	can	be	displayed	by	click- ing the [Search] button of the IP setting software. 
	 •	 When	 a	 duplicate	 IP	 address	 is	 used,	 the	 corresponding	 camera	 number	 will	 be	 displayed	 shaded. 
	 •	 When	 the	 [Access	 Camera]	 button	 is	 clicked,	 live	 images	 of	 the	 selected	 camera	 will	 be	 dis- played.
	 •	 It	is	possible	to	change	the	"Camera	list"	display	between	IPv4	addresses	and	IPv6	addresses	 in...

29
Troubleshooting
Before asking for repairs, check the symptoms with the following table. 
Contact your dealer if a problem cannot be solved even after checking and trying the solution in th\
e 
table or a problem is not described below. 
SymptomCause/solutionReference 
pages
Power is not turned on. 
	• 	 A r e 	the	PoE	device	and	the	network	
connector on the rear of the camera 
connected using a LAN cable?
   →  Check whether the connection is 
appropriately established. 
	•	 Depending	on	the	PoE...

30
• Basic
Power source: PoE (IEEE802.3af compliant)
Power consumption: 
SF135  PoE 48 V: 54 mA (Class 1 device)
  SF132  PoE 48 V: 46 mA (Class 1 device)
Ambient operating temperature:  0 °C to +40 °C {32 °F to 104 °F}
Ambient operating humidity:  Less than 90 % (no condensation)
Dimensions:  ø100 mm x 47 (H) mm 
{ø3-15/16 inches x 5-3/4 inches (H)}
Mass:  Approx. 200 g {0.44 lbs}
Finish:  Main body: ABS resin, sail white
   Dome section: Clear polycarbonate resin
• Camera
Image sensor: 
SF135...