Panasonic Network Camera Server BB HCS301A Geting Started Manual

							Operating Instructions
[For assistance, please call: 1-800-272-7033] 75
Notes
 When setting authentication, set the user name and password, and save 
them.
 When users other than an administrator are accessing this product, 
[Setup] and [Maintenance] tab will not be displayed.
 The user name and password are case sensitive.
3.Click [Save] when finished.
 New settings are saved.
 When finished, Success! is displayed.
SettingDescription
General 
AuthenticationAuthentication has 2 phases.
 If you set [Permit access from guest users], this product 
does not display the authentication window in camera 
access. All guest users can view the image without user 
name and password.
Note
If you set [Permit access from guest users], [Login] tab is 
displayed at the top of the page. After you log in as an 
administrator (see page 
77), you can access the Setup 
page and the Maintenance page.
 If you set [Do not permit access from guest users], this 
product displays authentication window in camera access. 
Users must enter the user name and password.
User Name/
Password User Name (6 to 15 characters): Enter the user name.
 Password (6 to 15 characters): Enter the password.
Note
The password must be different from the user name.
 Retype Password: Reenter the password.
 Enter ASCII characters (see page 163). But [Space], [], [], 
[&], [] and [:] are not available. 
						

							Operating Instructions
76
4.Click [Go to Security: Administrator page].
 The Security: Administrator page is displayed.
Note
 When the user name and password have been changed, this product 
displays an authentication window. Enter the user name and password, 
and click [OK].
Administrator/General Users/Guest Users
This product has 3 user levels (administrator, general users and guest users).
Note
Guest users mean unregistered users. Set [Permit access from guest users] 
on the Security: Administrator page (see page 
74).
ItemsAdministratorGeneral UsersGuest Users
User Name and 
PasswordRequiredRequiredNot Required
Number of Users150—
Accessible PagesAll PagesPages Except For 
Setup and 
Maintenance pagePages Except For 
Setup and 
Maintenance page
Access LevelAll OperationsAccess level can 
be set for each 
general user (see 
page 
78).
Access level can 
be set for guest 
users (see page 
78). 
						

							Operating Instructions
[For assistance, please call: 1-800-272-7033] 77
2.13 Logging in to this Product
If you set [Permit access from guest users] on the Security: Administrator page, 
[Login] tab is displayed at the top of the page. After you log in as an administrator, 
you can access the Setup page and the Maintenance page.
1.Click [Login] tab at the top of the page.
2.Check the login mode, and click [Login].
Note
The authentication window is displayed. Enter the user name and password 
set for General Users or Administrator.
3.Enter a valid user name and password according to the Login mode selected 
in step 2, and click [OK]. 
						

							Operating Instructions
78
2.14 Creating, Modifying or Deleting General Users
The General User page allows you to create, modify or delete general users. Up to 
50 general users can be registered. The access level is set for each general user. 
If you set [Permit access from guest users] on the Security: Administrator page, the 
access level can be set for guest users.
Note
For general users, the Setup and Maintenance tabs are not displayed.
1.Click [General User] on the Setup page.
2.If you create a general user, click [Create].
 When setting [Do not permit 
access from guest users] When setting [Permit access 
from guest users]
 If you change the settings of general users or guest users, select 
their name and click [Modify]. The modification page is displayed.
 If you delete a general user, select the name and click [Delete]. The 
confirmation page is displayed. 
						

							Operating Instructions
[For assistance, please call: 1-800-272-7033] 79
3.Set each parameter.
 Settings for a general user Settings for guest users
 Clicking [Cancel] takes you back to the previous page without 
saving changes.
SettingDescription
User ID List Up to 50 general users can be registered.
 The list is used to modify or delete general user settings.
User Name/
Password User Name (6 to 15 characters): Enter the user name.
 Password (6 to 15 characters): Enter the password.
Note
The password must be different from the user name.
 Retype Password: Reenter the password.
 Enter ASCII characters (see page 163). But [Space], [], [], 
[&], [] and [:] are not available. 
						

							Operating Instructions
80
4.Click [Save] when finished.
 New settings are saved.
 When finished, Success! is displayed.
5.Click [Go to General User page].
Access LevelAccess level is set for each general user. Check the feature to 
enable.
 In the limit time of continuous motion JPEG, set the time to 
change the video (Motion JPEG) to still images for each 
user. (Not permitted, Unlimited, 10 seconds—60 minutes) 
In the refresh interval, set the refresh interval after the 
video changes to still images. (3—60 seconds)
 See each page for the following features.
External Output Control (see page 24)
Change Refresh Interval (see page 24)
Change Resolution (see page 24)
Change Quality (see page 24)
Capture Image Button (see page 23)
Listen (see page 25)
Talk (see page 25)
View Multi-Camera page (see page 27)
View Buffered Image page (see page 29)
Setting Description 
						

							Operating Instructions
[For assistance, please call: 1-800-272-7033] 81
2.15 Procedures of Buffering or Transferring 
Images
The procedures from this page to page 112 are described about settings of the 
image buffer or transfer. See the procedures below to understand the general 
outline of the settings.
Buffer/Transfer by Timer 
(Page 82)
Transfer Method 
(Select one from the lists.)
 No Transfer, No Memory 
Overwrite
 No Transfer, Memory 
Overwrite
 FTP
 E-mail
Transfer Method 
(Select one from the lists.)
 No Transfer, No Memory 
Overwrite
 No Transfer, Memory 
Overwrite
 FTP
 E-mailTransfer Method 
(Select one from the lists.)
 No Transfer, No Memory 
Overwrite
 No Transfer, Memory 
Overwrite
 FTP
 E-mail Buffer/Transfer by Alarm 
Signal (Page 91)
E-mail Notification When 
Triggered Setting
Changing Motion Detection 
Sensitivity (Page 118)
E-mail Notification When 
Triggered Setting
Notifying the Alarm Log 
(Page 121)Notifying the Alarm Log 
(Page 121)
Save the settings to complete.
Buffer/Transfer by 
Motion Detection Signal 
(Page 102)
Time Setting
Image Setting
Image Buffer Frequency Setting
Time Setting
Image Setting
Image Buffer Frequency Setting
Save the settings to complete.
Time Setting
Image Setting
Image Buffer Frequency Setting
Save the settings to complete. 
						

							Operating Instructions
82
2.16 Buffering or Transferring Images by Timer
The Trigger page allows you to enable image buffer/transfer by E-mail or FTP.
Note
If you are recording images to the SD memory card, refresh interval slows 
down.
1.Click [Trigger] on the Setup page.
2.Click No. to enable buffer/transfer.
3.Check [Enable Image Buffer/Transfer], and select [Timer] for trigger, and click 
[Next>].
Notes
 If you click [Save], all buffered images on the SD memory card are 
deleted.
 Click [Delete Buffered Images] to delete the buffered images.
 Click [Save] to save the settings.
 Clicking [Cancel] takes you back to the Trigger page without saving 
changes. 
						

							Operating Instructions
[For assistance, please call: 1-800-272-7033] 83
4.Set the time, and click [Next>].
Note
The timer works by an internal clock. Set the date and time before using timer 
buffer/transfer (see page 
64).
 Clicking [].
SettingDescription
Enable Image 
Buffer/Transfer Check the box to enable the Trigger setting. Clear the box 
to disable it.
Trigger Selecting [Timer] enables this product to buffer/transfer the 
image by timer.
 Selecting [Alarm] enables this product to buffer/transfer the 
image by alarm signal.
 Selecting [Motion Detection] enables this product to 
capture/transfer the images when the motion detects 
something.
SettingDescription
A day of the 
week Check the box to enable the day. Clear the box to disable it.
Active Time of 
Trigger Select the [Always] option when you do not specify the time 
period. If you specify the time period, select the time period 
option and set the time period. 
						

							Operating Instructions
84
 Clicking [].
Note
Due to the network environment, object, number of accesses, enabling IPsec, 
this product may not record the numbers of images as you set. In this case, set 
the image buffer frequencies longer.
 Clicking [