Panasonic Network Camera Management System Bbhgw700a Operating Instructions

							121 [For assistance, please call: 1-800-272-7033]Operating Instructions
Other 
Information
9.Click [Finish].
10.Click [Properties].
11.Click the Networking tab, select PPTP VPN 
f
rom the VPN dropdown list, and click [OK].
 Set the Security settings and Options 
settings to match the authentication and 
encryption methods (see page 86) set on 
this product.
12.Enter the registered User Name and Password 
and click [Connect]
. 
						

							Operating Instructions
122
4.5 Web Browser Setup when Using a Proxy Server
The ISP may connect you to the Internet via a proxy server.
When connected via a proxy server, the setup page cannot be accessed. Take the following steps to 
modify the web browser settings.
The following steps are for when using Internet Explorer 6.0.
1.Start the web browser.
2.Select Internet Options in the Tools menu.
3.Click the Connections tab.
4.Click [LAN Settings].
5.See the Use a proxy server for your LAN check 
box in the Local Area Network (LAN) Settings 
dialog box
.
 If the check box is checked, uncheck it and 
click [OK].
 If the check box is unchecked, click 
[Cancel] and complete settings.
Confirm that this box 
is not checked. 
						

							123 [For assistance, please call: 1-800-272-7033]Operating Instructions
Other 
Information
4.6 Checking the PCs IP Address and MAC Address
When this products setup page cannot be accessed by a PC, or when data cannot not be sent/
received to/from other PCs on the network, there could be a problem with the PCs IP address settings. 
Take the following steps to check the IP address settings.
4.6.1 Using Windows XP/2000
Note
The ipconfig command explanations are displayed by entering ipconifg/? after the command 
prompt.
1.From the Start menu, select All programs, 
Accessories and Command Prompt
.
 When using Windows 2000, from the Start 
menu, select Programs, Accessories and 
Command Prompt.
2.Enter ipconifg/all after the command prompt 
and push the [Enter] key
.
ipconfig/renew refreshes all of the LAN 
cards DHCP composition parameters.
ipconfig/release releases all of the LAN 
cards DHCP composition parameters. 
						

							Operating Instructions
124
4.6.2 Using Windows Me/98SE
The following steps are for Windows 98SE.
1.From the Start menu select Run.
2.Enter winipcfg in the name field and click 
[OK]
.
3.Select the LAN card (Ethernet adapter) with 
the IP address you want to check
.
4.Click [More Info].
 See the IP Address field and check the set 
IP address.
 See the Adapter Address field and check 
the LAN card (Ethernet adaptor) MAC 
address. 
						

							125 [For assistance, please call: 1-800-272-7033]Operating Instructions
Other 
Information
Note
When Obtain an IP address automatically is set and a value such as 169.254.XXX.X is 
displayed, it is possible that the IP address was not obtained correctly. In that case, take the 
following steps to refresh the IP address.
1.Click [Release].
 The automatically obtained IP address is released.
2.Click [Rewrite].
 A new IP address is assigned.
3.Click [OK]. 
						

							Operating Instructions
126
4.7 Stabilizing the PCs IP Address
It is necessary to set a unique IP address for each of the PCs on this products TCP/IP network.
This product can automatically assign an IP address to each of the PCs on the LAN (Home) side using 
the DHCP server function (factory default setting). In this case, for this product to assign and re-assign 
IP addresses to each PC, the PCs IP addresses cannot be fixed.
This products IP address assignment network (factory default setting)
At the same time, it is possible to disable this products DHCP server function, and fix each LAN side 
PCs private address. In this case, it is necessary to set a unique IP address to each PC in advance.
Network with stable IP addresses (Options)
This function allows you to fix a private address on the network without using the DHCP server 
function. It is necessary to fix a unique private address on each PC. After setting the unique private 
addresses, you can set this product. See page 
74, and disable the DHCP server function on the 
options page. Follow the steps on page 123 - 124 to setup each PC.
Private address 
assignment
Private address 
assignmentPrivate address 
assignment
Private address
192.168.0.254
Private address
192.168.0.2Private address
192.168.0.3Private address
192.168.0.4 
						

							127 [For assistance, please call: 1-800-272-7033]Operating Instructions
Other 
Information
4.7.1 Using Windows XP/2000
1.From the Start menu, select My Computer, My 
Network, and then Display Network 
Connection
.
 Right-click the My Network Places icon and 
select Properties when using Windows 
2000.
2.Right-click the icon Local Area Connection... 
connected to this product, and select 
[Properties]
.
3.Select Internet Protocol (TCP/IP) and click 
[Properties]
.
4.Select Use the following IP address.
5.Enter the IP address (e.g. 192.168.0.50) and 
subnet mask for each PC, and enter 
192.168.0.254 (this products factory default 
IP address) into the Default 
gateway field.
 The subnet mask is usually entered as 
255.255.255.0. To access this products 
setup page, enter the same subnet mask 
as this product. 
						

							Operating Instructions
128
6.Click Use the following DNS server address.
7.Enter the DNS server address into the data 
entry field and click [OK]
.
8.Click [OK],
9.Close the Network Connection window and 
restart the PC
.
 Close the Network and Dialup Connections 
window and restart the PC when using 
Windows 2000. 
						

							129 [For assistance, please call: 1-800-272-7033]Operating Instructions
Other 
Information
4.7.2 Using Windows Me/98SE
1.From the Start menu, select Settings and click 
Control Panel
.
2.Double click the Network icon.
 If you cannot find the Network icon on 
Windows Me, click Display all Control Panel 
Options.
3.Select the TCP/IP related to the LAN card 
connected to this product in the Network dialog 
box, and click [Properties]
.
 The TCP/IP Properties dialog box is 
displayed.
4.Click the IP Address tab in the TCP/IP 
Properties dialog box
.
5.Select Specify IP Address.
6.Enter the IP address (e.g. 192.168.0.50) and 
subnet mask for each PC
.
 The subnet mask is usually entered as 
255.255.255.0. To access this products 
setup page, enter the same subnet mask 
as this product. 
						

							Operating Instructions
130
7.Click the Gateway tab.
8.Enter 192.168.0.254 (this products factory 
default IP address) into the New Gateway 
address field, and click [Add]
.
9.Check that 192.168.0.254 is entered into the 
address field of Installed Gateway
.
 When modifying this products IP address, 
also modify the Installed Gateway address.
10.Click the DNS Configuration tab.
11.Select Enable DNS.
12.Enter the DNS server address into the DNS 
Server Search Order address field, and click 
[Add]
.
13.Enter the optional host name and click [OK].
14.Click [OK].
 The Modify System Setup dialog box is 
displayed.
15.Click [Yes] and restart the PC.