Panasonic Network Camera Kx Hcm110a Operating Instructions

							Operating Instructions
[For assistance, please call: 1-800-272-7033] 151
CameraCamera NameNetwork
CameraRequired1—15 characters 
*6
White BalanceAuto-Auto/Fixed Indoor/
Fixed Fluorescent 
(White)/Fixed 
Fluorescent 
(Daylight)/Fixed 
Outdoor/Hold
AC Power Source 
Frequency60Hz -50Hz/60Hz
Pan Range (Minimum)-60 degrees--60—+60 degrees
(Home Position)0 degrees--60—+60 degrees
(Maximum)+60 degrees--60—+60 degrees
Tilt Range (Minimum)-45 degrees--45—+20 degrees
(Home Position)0 degrees--45—+20 degrees
(Maximum)+20 degrees--45—+20 degrees
Return to Specified 
Position (Time)Do not move-Do not move, 10, 
30 (min), 1 h
(Specified Position)Home 
Po si t io n-Home Position/
Preset No. 1—8/
Alarm No. 1, 2
Color Night View Disable--
Items Default Required Note 
						

							Operating Instructions
152
Account
AudioOutput Enable--
Vo l u m eStandard-Minimum/
Standard/
Maximum
PC Audio Input Timeout 1 min-1, 2, 3, 5, 10, 20, 
30, 60 (min)
InputEnable--
Camera Microphone 
SensitivityStandard-Minimum/
Standard/
Maximum
Mute during Pan/TiltEnable--
ItemsDefaultRequiredNote
Security: 
AdministratorGeneral 
AuthenticationDo not permit 
access from 
guest users --
User Name[Blank]When setting 
administrator6—15 characters 
*3
Password[Blank]When setting 
administrator6—15 characters 
*3
Retype 
Password[Blank]When setting 
administrator6—15 characters 
*3
Items Default Required Note 
						

							Operating Instructions
[For assistance, please call: 1-800-272-7033] 153
Buffer/Transfer
General UserUser ID List[Blank]--
User Name[Blank]When setting 
general user6—15 characters 
*3
Password[Blank]When setting 
general user6—15 characters 
*3
Retype 
Password[Blank]When setting 
general user6—15 characters 
*3
Limit time of 
Continuous 
Motion JPEGNot permitted-Not permitted, 
Unlimited, 10, 30 
(s), 1, 5, 10, 30, 60 
(min)
Refresh 
Interval3 s-3, 5, 10, 30, 60 (s)
Access LevelNo checks--
ItemsDefaultRequiredNote
Tr i g g e rStatusOff--
Tr i g g e rTimer--
Active Time of TriggerAlways--
Image Setting 
(Image Resolution)
320 x 240-160 x 120, 320 x 
240, 640 x 480
Image QualityStandard-Favo r  Cl ar i t y, 
Standard, Favor 
Motion, Mobile 
phone
Image Buffer 
FrequencyEvery 1 s, 
buffer 1 
image.-1 image per 
hour—30 images 
per second
Transfer MethodNo Transfer, 
No Memory 
Overwrite--
Notify---
Items Default Required Note 
						

							Operating Instructions
154
Motion 
DetectionThreshold to start 
recording Third blocks 
from the left--
SensitivityCenter--
Alarm 
LogA setup of operationDisableWhen 
selecting 
Alarm1, 
Alarm2 or 
Motion 
Detection in 
Tr i g g e r .Disable/ 
Enable(When 
there is no new-
arrival alarm 
log:Disable)/
Enable(When 
there is no new-
arrival alarm 
log:Enable)
Active TimePM 12h 0minAM/PM, 1–12 
(h), 0/10/20/30/
40/50 (min)
TimeChecked-
Notice setup of an 
alarm log[Blank]-
Por t No. (SMTP)25-
Por t No. (POP)110-
SubjectAlarm Log-
Items Default Required Note 
						

							Operating Instructions
[For assistance, please call: 1-800-272-7033] 155
Advanced
ItemsDefaultRequiredNote
Image 
DisplaySingle Camera Image 
Resolution320 x 240-320 x 240 or 640 
x 480
Single Camera Image 
QualityStandard-Favo r  Cl ar i t y, 
Standard or 
Favo r  Mo t io n
Single Camera 
Refresh IntervalMotion-3, 5, 10, 30, 60 
(s) or Motion
Multi-Camera Image 
Resolution320 x 240-160 x 120 or 320 
x 240
Multi-Camera Image 
QualityStandard-Favo r  Cl ar i t y, 
Standard or 
Favo r  Mo t io n
Multi-Camera Refresh 
IntervalMotionWhen 
reducing 
traffic3, 5, 10, 30, 60 
(s) or Motion
Time stamp settingDisable-Disable/Enable
LanguageEnglish-English/
Japanese/
French/German/
Italian/Spanish/
Simplified 
Chinese/Russian
Banner Display 
(Administrator)Checked--
(General User)Checked-- 
						

							Operating Instructions
156
Preset Buttons
Multi-
CameraMulti-Camera[Blank]--
DisplayCheckedWhen setting 
Multi-Camera-
IP Address or Host 
Name[Blank]When setting 
Multi-CameraIP address*1  
Host name*5 is 
1—255 
characters.
Por t No.[Blank]When setting 
Multi-Camera20, 21, 25 and 
110 are not 
available.*2
Camera Name[Blank]When setting 
Multi-Camera1—15 characters 
*7
Operation 
TimeOperation TimeAlways--
External 
OutputExternal Device 
Control Output Open-Open/Short to 
GND
Button name 
modificationOpen/Short--
Indicator 
ControlIndicator ControlTu r n  i n d i c a t o r  
on when 
camera is on--
ItemsDefaultRequiredNote
Preset 
ButtonsPreset 1UpperLeft--
Preset 2UpperRight--
Preset 3LowerLeft--
Preset 4LowerRight--
*1In IPv4, set 4 digits (0—255) and 3 periods such as 192.168.0.253. But 
0.0.0.0 and 255.255.255.255 are not available.
In IPv6, set 8 hexadecimal digits divided with :. Consecutive 0s can be 
abbreviated as ::.
Items Default Required Note 
						

							Operating Instructions
[For assistance, please call: 1-800-272-7033] 157
*2Set the number of 1—65535.
*3Enter ASCII characters (see page 168). But [Space], [], [], [&], [] and [:] 
are not available.
*4Enter ASCII characters for the host name (see page 168). But [Space], [], [], 
[&], [] are not available.
*5Enter ASCII characters for the host name (see page 168). But [Space], [], [], 
[#], [&], [%], [=], [+], [?], [] are not available.
*6Enter ASCII characters (see page 168) or characters in each language (1—15 
characters for a 1-byte character and 1—7 characters for a 2-byte character). 
But [Space], [], [], [&], [] are not available.
*7Enter ASCII characters (see page 168) or characters in each language (1—15 
characters for a 1-byte character and 1—7 characters for a 2-byte character). 
But [Space], [], [], [#], [&], [%], [=], [+], [?], [] are not available. 
						

							Operating Instructions
158
3.6 Cleaning
After the camera is turned off by disconnecting the AC plug, clean the camera.
3.6.1 Cleaning the Main Unit
If the lens cover has the dust, image quality may decrease. After taking away the 
dust on it, wipe it with a dry cloth.
Note
 Do not use alcohol, polishing powder, cleanser, benzine, thinner, wax, 
petroleum products or hot water to wipe the camera. Also avoid glass 
cleaner, pesticide or hair spray. They may cause change in the shape or 
color.
 Do not directly touch the lens cover. Your fingerprints can cause the image 
to be out of focus. 
						

							Operating Instructions
[For assistance, please call: 1-800-272-7033] 159
3.7 Setting an IP Address on Your PC
Your PCs IP address can be assigned by the following procedures.
1.Display the TCP/IP Properties window.
 The steps are different depending on your OS. The steps are shown 
below.
 When using Windows XP and Windows 2000, log in as an administrator 
to access the TCP/IP Properties window.
2.Enter IP address and subnet mask.
3.Click [OK].
 In Windows Me or Windows 98SE, the PC needs to be restarted to enable 
the settings.
Local IP Address
Local IP address is the network ID that is not used on the Internet. They are 
classified into Class A, Class B and Class C, as shown below. Set the IP address 
in the range of the number specified in the class corresponding to your local 
network scale.
OSSteps
Windows XP[Start] ([Settings])[Control Panel][Network and 
Internet Connections][Network Connections][Local Area 
Connection] in use[Properties]Select Internet Protocol 
[TCP/IP][Properties][Use the following IP address]
Windows 2000[Start][Settings][Control Panel][Network and Dial-up 
Connections][Local Area Connection] in use 
[Properties]Select Internet Protocol [TCP/IP] 
[Properties][Use the following IP address]
Windows Me, 
Windows 98SE[Start][Settings][Control Panel][Network]Select 
[TCP/IP] with adaptor in use[Properties][IP Address] 
[Specify an IP address]
ClassSubnet MaskLocal IP Address
Class A255. 0. 0. 010. 0. 0. 1—10. 255. 255. 254
Class B255. 255. 0. 0172. 16. 0. 1—172. 31. 255. 254
Class C255. 255. 255. 0192. 168. 0. 1—192. 168. 0. 254 
						

							Operating Instructions
160
3.8 Using Setup Program
The Setup Program can be used for the following purposes.
 Finding the IP address and port number of the camera connected to your 
network.
 Setting up the camera automatically.
 Setting up the camera manually to a Static or a DHCP setting.
 Disabling IPsec.
 Displaying the Setup page.
Finding the camera
1.Insert the Setup CD-ROM into the CD-ROM drive of your PC.
 If the Panasonic Network Camera Setup window does not appear, click 
setup.exe on the Setup CD-ROM.
2.Click [Camera Setup].
Displays version information 
about this program.
 
 
Sets up the camera.
Displays the camera manuals. 
If your PC does not have Adobe® 
Acrobat® Reader®, install it from 
the Adobe Reader website.
Installs Network Camera 
Recorder trial version.
Closes the Setup Program.