Panasonic Network Camera Bl C1a Operating Instructions

Operating Instructions
[For assistance, please call: 1-800-272-7033] 51
3.Click [Save] when finished.
 The new settings are saved.
 When finished, Success! is displayed.
4.Click [Go to Camera page].
 The Camera page is displayed.
White BalanceSelect from the following options.
 Auto (default)—Automatic adjustment
 Fixed Indoor—Electric bulb (2800 K) 
 Fixed Fluorescent 
(White)—White (3600 K)
 Fixed Fluorescent 
(Daylight)—Daylight (4000 K)
 Fixed Outdoor—Solar light (6000 K)
Note
The kelvin...

Operating Instructions
52
3 Registering Users
3.1 Changing the Authentication Setting and 
Administrator User Name and Password
The Security: Administrator page allows you to change authentication, and the 
administrators user name and password. An authentication window allows 
registered users to access the camera.
Note
 If you access the camera for the first time, the window for setting the 
administrators user name and password is displayed. Make a note of the user 
name and password so that you will...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 53
2.Set each parameter.
 Clicking [Cancel] cancels your settings without saving changes.
SettingDescription
General 
AuthenticationAuthentication has 3 phases.
 If you set [Permit access from guest users], the camera 
does not display the authentication window in camera 
access. All guest users can view images without a user 
name and password.
Note
If you set [Permit access from guest users], [Login] tab is 
displayed at the top of...

Operating Instructions
54
Note
 When setting authentication, set the user name and password, and save 
them.
 When users other than an administrator are accessing the camera, the 
[Setup] and [Maintenance] tabs will not be displayed.
 The user name and password are case sensitive.
3.Click [Save] when finished.
 The new settings are saved.
 When finished, Success! is displayed.
4.Click [Go to Security: Administrator page].
 The Security: Administrator page is displayed.
Note
When the user name and...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 55
Administrator/General Users/Guest Users
The camera has 3 user levels (administrator, general users and guest users).
Note
Guest users mean unregistered users. Set [Permit access from guest users] 
or [Permit access from guest users (mobile only)] on the Security: 
Administrator page (see page 
52) to allow access from guest users.
ItemsAdministratorGeneral UsersGuest Users
User Name and 
PasswordRequiredRequiredNot Required
Number of...

Operating Instructions
56
3.2 Logging in to the Camera
If you set [Permit access from guest users] on the Security: Administrator page, 
[Login] tab is displayed at the top of the page. After you log in as an administrator, 
the Setup page and the Maintenance page can be accessed.
1.Click [Login] tab at the top of the page.
2.Check a login mode, and click [Login].
Note
The authentication window is displayed. Enter the user name and password 
set for General Users or Administrator.
3.Enter a valid user...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 57
3.3 Creating, Modifying or Deleting General Users
The General User page allows you to create, modify or delete general users. Up to 
50 general users can be registered. The access level is set for each general user. 
If you set [Permit access from guest users] or [Permit access from guest users 
(mobile only)] on the Security: Administrator page, the access level can be set for 
guest users.
Note
For general users, the Setup and...

Operating Instructions
58
3.Set each parameter.
4.Click [Save] when finished.
 The new settings are saved.
 When finished, Success! is displayed.
5.Click [Go to General User page].
 The General User page is displayed.
 Settings for general users Settings for guest users
 Clicking [Cancel] takes you back to the previous page without 
saving changes.
SettingDescription
User ID List Up to 50 general users can be registered.
 The list is used to modify or delete general user settings.
User Name/...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 59
4 Buffering or Transferring Images
4.1 Procedures of Buffering or Transferring 
Images
The procedures from this page to page 70 are described about settings of the 
image buffer or transfer. See the procedures below to understand the general 
outline of the settings.
Transfer Method 
(Select one from the lists.)
 No Transfer, No Memory Overwrite
 No Transfer, Memory Overwrite
 FTP
 E-mailTransfer Method 
(Select one from the...

Operating Instructions
60
4.2 Buffering or Transferring Images by Timer
The Trigger page allows you to enable image buffer/transfer by E-mail or FTP.
1.Click [Trigger] on the Setup page.
2.Click a No. to enable buffer/transfer.
3.Check [Enable Image Buffer/Transfer], and select [Timer] for the trigger, and 
click [Next>].
Note
 Click [Delete Buffered Images] to delete images already buffered.
 Click [Save] to save the settings. The buffered images will be deleted.
 Clicking [Cancel] takes you back to...