Panasonic Network Camera Bb Hcm371a Operating Instructions

Operating Instructions
 [For assistance, please call: 1-800-272-7033]                                  11
2.16 Changing Initial Settings on the Single Camera page or the Multi-
Camera page ............................................................................... 84
2.17 Configuring Multiple Cameras...................................................... 87
2.18 Format the SD memory card........................................................ 89
2.19 Stop the SD Memory Recording...

Operating Instructions
12
3.10 Setting Your PC.......................................................................... 146
3.10.1 Setting the Proxy Server Settings on Web Browser  ............................. 146
3.10.2 Setting UPnP™ to Display Camera Shortcut in My Network Places ..... 149
3.10.3 Setting the Internet Temporary File Setting on Web Browser ................ 149
3.11 ASCII Character Table ............................................................... 150
3.12 File Size and Number of...

Operating Instructions
 [For assistance, please call: 1-800-272-7033]                                  13
1 Camera Monitoring
1.1 Accessing the Camera
1.Start up the web browser on your PC.
2.Enter http://IPv4 Address (or URL):Port Number on the address bar, and 
press [Enter] on the keyboard.
 When port number is 80 (default), you do not need to enter port number. 
See page 44 for details about port number.
 For IPv6 connection, see page 15 and page 16, and prepare the 
requirements. Enter the...

Operating Instructions
14
4.Click the following tabs to display each page.
Notes
 When users other than an administrator are accessing the camera, 
[Setup] and [Maintenance] tab will not be displayed. Additionally, When 
[Do not permit access from guest users] is set on the Security: 
Administrator page, [Login] tab will not be displayed.
 If [View Multi-Camera page] or [View Buffered Image page] is not 
permitted on the General User page, [Multi-Camera] or [Buffered Image] 
tab will not be displayed....

Operating Instructions
 [For assistance, please call: 1-800-272-7033]                                  15
1.1.1 To Access the Camera in IPv6
You need to prepare the followings to access the camera in IPv6.
PC Requirements
Operating System: Windows XP Service Pack 1 or later
Web Browser: Internet Explorer 6.0 or later
An IPv6 Router
An IPv6 Connection Service
To connect in IPv6, subscribe to the ISPs IPv4/IPv6 Dual-Stack or IPv6 over 
IPv4 Tunneling service. The camera does not work in IPv6-only...

Operating Instructions
16
Setting up the IPv6 Router, your PC, and the Camera
Setting up the IPv6 Router
Set up the router as you subscribe to the IPv6 service. If the access from WAN side 
is disabled on the router, enable the TCP packets from WAN side in the packet 
filtering. See the Panasonic Network Camera support website at http://
panasonic.co.jp/pcc/products/en/netwkcam/ for information about the 
recommended routers.
Setting up your PC
1.Click [Start] [All Programs] [Accessories] [Command...

Operating Instructions
 [For assistance, please call: 1-800-272-7033]                                  17
1.2 Viewing Single Camera page
1.Access the camera (see page 13).
The Top page is displayed.
2.Click the [Single] tab at the top of the page.
When Security Warning window is displayed, click [Yes] (see page 18).
See page 19 for Security Warning window when using Microsoft Windows 
XP Service Pack 2.
3.Close the web browser.
Notes
Refresh interval is [Motion] by default. You can change it on the...

Operating Instructions
18
When you view a dark image, enable the color night view mode on the 
Camera Setup page (see page 71). The image will be brighter, but the 
refresh interval may slow down and image quality may decrease in a dark 
place.
The image may stop refreshing because the wireless communication can 
be disconnected depending on the environment. Click [Refresh] at the tool 
bar on the web browser.
Security Warning window
To view a video (Motion JPEG) or to use audio feature, ActiveX®...

Operating Instructions
 [For assistance, please call: 1-800-272-7033]                                  19
Video may not be displayed quickly or audio may not be listened immediately. 
Wait for a while.
If you use a proxy server, set the web browser not to access the proxy server 
(see page 146).
In some corporate network environments a firewall may be used for security 
purposes. It is possible that this may prevent motion video from being 
displayed. In this situation we suggest:
Contact your...

Operating Instructions
20
The Banner
When the camera accesses the Internet, the banner displays product information 
about cameras or announcements about the latest firmware, etc. from Panasonic. 
Whether or not to display the banner can be set at Banner Display (see page 84).
Notes
The banner is displayed when [Yes] is checked for Allow Access from the 
Internet on the Automatic Setup page, or when [Enable] is checked for Auto 
Port Forwarding on the UPnP page for the Connection Mode of Static or...