Panasonic Network Camera Bb Hce481a Operating Instructions

Operating Instructions
91
Administrator/General Users/Guest Users
The access level to the camera is divided to administrator, general users and guest 
users.
Note
 Guest users mean unregistered users. Set [Permit access from guest 
users] or [Permit access from guest users (mobile only)] on the Security: 
Administrator page (see page 88) to allow access from guest users. Items Administrator General 
UsersGuest Users Guest Users 
(mobile only)
User Name 
and PasswordRequired Required Not Required Not...

Operating Instructions
92
3.2 Logging in to the Camera
If you set [Permit access from guest users] on the Security: Administrator page, 
[Login] is displayed at the top of the page. After you log in as an administrator, the 
Setup page and the Maintenance page can be accessed.
1.Click [Login] at the top of the page.
2.Check a login mode, and click [Login].
Note
 The authentication window is displayed. Enter the user name and 
password set for General Users or Administrator.
3.Enter a valid user name and...

Operating Instructions
93
3.3 Creating, Modifying or Deleting General 
Users
The General User page allows you to create, modify or delete general users. Up to 
50 general users can be registered. The access level is set for each general user. 
If you set [Permit access from guest users] or [Permit access from guest users 
(mobile only)] on the Security: Administrator page, the access level can be set for 
guest users.
Note
 For general users, the Setup and Maintenance tabs are not displayed.
1.Click...

Operating Instructions
94
3.Set each parameter.
 Settings for general users  Settings for guest users
 Clicking [Cancel] takes you back to the previous page without 
saving changes.
Setting Description
User ID List  Up to 50 general users can be registered.
 The list is used to modify or delete general user settings.
User Name/
Password User Name (6 to 15 characters): Enter the user name.
 Password (6 to 15 characters): Enter the password.
Note
 The password must be different from the user name....

Operating Instructions
95
4.Click [Save] when finished.
 The new settings are saved.
 When finished, Success! is displayed.
5.Click [Go to General User page].
 The General User page is displayed.Setting Description
Access Level An access level is set for each general user. Check each 
feature to enable access to it.
 In the limit time of continuous Motion JPEG setting, set the 
time for changing video (Motion JPEG) to still images for 
each user. (Not permitted, Unlimited, 10 seconds—60 
minutes) In...

Operating Instructions
96
4 Buffering or Transferring Images
4.1 Procedures of Buffering or Transferring 
Images
The procedures from this page to page 130 are described about settings of the 
image buffer or transfer. See the procedures below to understand the general 
outline of the settings.
Buffer/Transfer by Timer 
(Page 97)
Transfer Method 
(Select one from the lists.)
 No Transfer, No Memory 
Overwrite
 No Transfer, Memory 
Overwrite
 FTP
 E-mailTransfer Method 
(Select one from the lists.)
...

Operating Instructions
97
4.2 Buffering or Transferring Images by Timer
The Trigger page allows you to enable image buffer/transfer by E-mail or FTP.
Note
 If you are recording images to the SD memory card, refresh interval slows 
down.
1.Click [Trigger] on the Setup page.
2.Click a No. to enable buffer/transfer.
3.Check [Enable Image Buffer/Transfer], select [Timer] for the trigger, and click 
[Next>].
 Click [Delete Buffered Images] to delete images already buffered.
 Click [Save] to save the...

Operating Instructions
98
4.Set the time, and click [Next>].
Note
The timer works by an internal clock. Set the date and time before using timer 
buffer/transfer (see page 77).
 Clicking [].
 Clicking [

Operating Instructions
99
6.Set the image buffer frequency, and click [Next>].
 Clicking [

Operating Instructions
100
7.Select the transfer method, and click [Next>].
 Clicking [