Panasonic Network Camera Bb Hce481a Operating Instructions

Operating Instructions
Network Camera
Please read this manual before using, and save this manual for future reference.
Panasonic Network Camera Website: http://www.panasonic.com/netcam
for customers in the USA or Puerto Rico
Model No.BB-HCM381A (AC Adaptor Type)
BB-HCE481A (PoE Type)
Indoor Use Only 

Operating Instructions
2
Main Features
IPv6*1 Network Camera
Your Panasonic Network Camera supports IPv6 (Internet Protocol Version 6). IPv6 
was created to address the additional IP addresses that will be needed as the 
Internet continues to expand. Since the camera also supports the currently used 
IPv4, its dual stack design will seamlessly operate while IPv6 is phased in. For 
more information regarding IPv6, see page 15, or visit http://www.ipv6.org/.
PoE (Power over Ethernet) Supported*2 (For Only...

Operating Instructions
3
Motion Detection
The camera has a Motion Detection feature that detects movement, such as 
people, based on the preset threshold and sensitivity of the camera.
You can buffer the camera images, transfer images to an FTP server or send E-
mails using the Motion Detection function as a trigger.
Better Image Quality
The CCD sensor and the color night view mode provides better image quality and 
low light performance.
 The CCD sensor gives you clear image.
 You can monitor live...

Operating Instructions
4
Enhanced Multi-Camera Page
The Multi-Camera page displays the moving images from up to 4 cameras, while 
supporting audio 2-way communication with each. This camera allows you to 
switch between 3 sets of 4 cameras. Additionally, static images from a maximum 
of 12 cameras can be displayed on a single page.
DynamicDNS Service Support
DynamicDNS service allows you to access the camera over the Internet with a 
domain name of your choice (e.g. bob.viewnetcam.com) instead of a...

Operating Instructions
5
Ta b l e  o f  C o n t e n t s
1 Camera Monitoring ....................................................... 8
1.1 BB-HCM381A Feature Locations ...................................................8
1.1.1 Front View...................................................................................................8
1.1.2 Rear View ...................................................................................................9
1.1.3 Bottom View...

Operating Instructions
6
2.7.1 Connecting the Camera to a Router that 
Supports UPnP™ (IPv4 Only) .................................................................. 68
2.7.2 Connecting the Camera to a Router that 
Does Not Support UPnP
™ (IPv4 Only) .................................................... 68
2.8 Registering with the DynamicDNS Service ................................. 70
2.8.1 DynamicDNS Service (IPv4/IPv6)............................................................ 75
2.9 Setting the Date...

Operating Instructions
7
5.5 Changing the Indicator Display ...................................................153
6 Camera Maintenance ................................................ 154
6.1 Maintenance page ......................................................................154
6.1.1 Confirming the Status .............................................................................155
6.1.2 Confirming Session Status .....................................................................155
6.1.3...

Operating Instructions
8
1Table of Con ten ts1 Camera Monitoring
1.1 BB-HCM381A Feature Locations
1.1.1 Front View
Indicator Display
*1 The indicator turns orange if the camera is not connected to the LAN.
*2 The indicator blinks orange if the camera is not connected to the LAN.
*3 See page 3 and 4 the Troubleshooting on the CD-ROM for information on indicator error 
codes.
Auto Focus/Zoom Lens
Wide: 5 mm (3/16 inches) —Infinity
Tele: 1 m (3 feet 3 inches) —Infinity
Indicator
The indicator color shows...

Operating Instructions
9
1.1.2 Rear View
1.1.3 Bottom View
Ethernet (LAN) port
Connects the camera to
your LAN.
Audio/Video terminal
(See Getting Started)External I/O
(See page 164)
DC IN jack
Connects the camera 
to the AC adaptor.
Hook for AC 
Adaptor Cord
Used to secure the 
AC adaptor cord.
FACTORY DEFAULT
RESET button
Resets settings to default
(see page 166).
Hole for Ceiling Plate A
Used for ceiling
mounting
(See Installation Guide).MAC Address and 
Serial Number are 
indicated on the label. 

Operating Instructions
10
1.2 BB-HCE481A Feature Locations
1.2.1 Front View
Indicator Display
*1 The indicator blinks orange if the camera is not connected to the LAN.
*2 See page 5 and 6 the Troubleshooting on the CD-ROM for information on indicator error 
codes.
Auto Focus/Zoom Lens
Wide: 5 mm (3/16 inches) —Infinity
Tele: 1 m (3 feet 3 inches) —Infinity
Indicator
The indicator color shows camera status (see 
page 153).
SD Memory Card Cover
Protects the SD Memory Card from dust. Remove 
the cover only...