Panasonic Multimedia Projection Hdtv Pt 52lcx66 Operating Instructions

21
Getting Start ed
By inputting a High-bandwidth Digital Content Protection high-definition picture source to the HDMI IN terminal of this 
Projection Display, high-definition pictures can be displayed on the screen in their digital form. (This terminal is for 
use with HDMI equipped DVD players, Set top boxes and D-VHS machines.)
Notes:
• Select the HDMI input position by pressing the TV/VIDEO button. (p. 32)
• The HDMI IN terminal can only be used with 1080i, 720p, 480p and 480i picture signals.
• If...

For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo22
Installation (continued)
How to connect the  PC IN Terminals
Notes:
• Some PC models cannot be connected to the set. A conversion adapter is required to use the RGB cable (D-SUB 15P) (Not 
included) to connect a Macintosh computer to the set. There is no need to use an adapter for computers with PC / AT compatible 
D-SUB 15P terminal.
• The computer shown in the illustration is for...

23
Getting Start edRGB signals that can be input
The table below lists the different types of RGB signals that can be input.
If a signal which differs greatly from the types listed below is input, the picture may not be displayed 
correctly, or a black background may be displayed.
Notes:
• Input signals, other than those listed with a * mark, will give you a beautiful, stable picture.
• The D-SUB 15P connector can accept RGB (H-V sync separate).
• When an external video processor/scaler is used, it must...

For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo24
Always be sure to follow the procedure given below to 
turn the Projection Display power ON and OFF.
• The lamp cooling fan will continue to operate for 
approximately 1 minute after the power is turned off. During 
this time, the POWER indicator will blink Red.
Press  POWER on Projection Display or Remote Control 
to turn power on.
The Power Indicator blinks Green for about 20...

25
Basic Operation
For your convenience, First Time Set up menu will 
be displayed on screen when the set is turned on 
for the first time. If needed, follow the menus and 
procedures displayed on-screen for setting up the 
features.
Auto program
You can scan All (Analog and Digital) channels. If 
needed, follow the menus and procedures displayed 
on-screen for setting up the features. You can also make 
the settings in Setup menu.
Notes:
• After “Auto program” is completed the unit tunes to the first...

For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo26
Pressing MENU displays the Main 
Menu screen.
Press to select the desired 
icon. Press to return to previous level menu.
Press Press to display Main menu.
Picture
Audio
Timer
Lock
Memory card
Setup
Menu
Picture 2/2
Color temp      Normal
Color mng.         On
Zoom adjust
PC adjust
Other adjust
Adv. adjust
Example:
If RETURN is pressed from Adv. adjust Menu:
Adv. adjust
Normal...

27
Basic Operation
Picture 1/2
Normal             No
Pic. mode        Vivid
Picture           +10
Brightness        +10
Color             +10
Tint              +10
Sharpness         +10
Picture 1/2
Normal             No  
Pic. mode        Vivid
Picture           +10
Brightness        +10
Color             +10
Tint              +10
Sharpness         +10
Press to enter the menu.
Press to select desired menu 
item.
Press to adjust or set desired 
menu item.
Other Adjust sub-menu.
Press to select “Other...

For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo28
Tuning channels
Switching languages for display
Allows you to select the language used for On 
Screen Displays.
Press MENU to display the Main Menu screen.
Press to select “Setup” icon.
Press to display the Setup 
menu.
1
Picture
Audio
Timer
Lock
Memory card
Setup
Menu
 CH scan      All   
 
 Language
 Program channel
 Input labels
 CC
 Other adjust
Setup
 Language ◄ English ►...

29
Basic Operation
Automatically searches and adds receivable 
channels to memory.
Press MENU to display the Main Menu screen.
Press to select “Setup” icon.
Press to display the Setup 
menu.
Press to display the Program 
channel menu. Press to select “Program 
channel”.
Press to select “Auto”.
1
Automatic program setting
2
3
Press to enter the Auto menu.Notes:
• Some channels with very weak signals may be locked into 
memory. If desired, these channels can be deleted man u al ly 
using the “Manual...

For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo30
Use this procedure when changing setting of 
receiving channels or changing the channel dis play.
Also, use to add or delete channels from channel list 
manually.
Manual program setting
Press MENU to display the Main Menu screen.
Press to select “Setup” icon.
Press to display the Setup 
menu.
Press to select “Manual”.
1
2
3
Press to enter the Manual 
program screen.
Picture
Audio...