Panasonic Multimedia Projection Hdtv Pt 52lcx66 Operating Instructions

11
Getting Start ed
Vent
Notes:
• Make sure the vents are not blocked. (This could cause damage.)
• Indication on the back panel may change without notice.
Vent
1S-Video/Video Input 
Connector 1Connect from other 
component. (Video 1)
2Audio Input 
Connector 1Connect from other 
component. (Video 1)
3S-Video/Video Input 
Connector 2Connect from other 
component. (Video 2)
4Audio Input 
Connector 2Connect from other 
component. (Video 2)
5Video Out 
ConnectorOutput video signal.
6Audio Out...

For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo12
Antenna Connection 
Connecting the Antenna / Cable to the RF IN Terminal
When using “Nut type” RF coaxial cable, tighten with fingers only. Overtightening may damage terminal.
• Turn off the power supply for all com po nents before making any connections.
• If the cables necessary for connecting a component to the system are not included with the component or available as an...

13
Getting Start edFor proper reception of analog or digital cable channels, a cable service connection is required.
Cable Connection
Use this confi guration when connecting the projection display to a cable TV system.
Notes:
• Certain cable systems offset some channels to reduce interference or have Premium (scrambled) channels. A cable converter 
box is required for proper reception. Check with your local cable company for its compatibility requirements.
• For reception of cable channels, connect the...

For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo14
How to connect the “1, 2, 3”  Input Terminals
Connect a  VCR or other peripheral equipment
Similar connections are available at the INPUT 1, 2, 3 input terminals. (p. 10-11)
Notes:
• Select the desired VIDEO input position by pressing the TV/VIDEO button. (p. 32)
• When connecting video cables, priority is given to the S-Video cable when the S-Video input terminal and the video...

15
Getting Start edHow to con nect the  COMPONENT VIDEO Input Terminals
Notes:
• Select the desired COMPONENT VIDEO INPUT position by pressing the TV/VIDEO button. (p. 32)
• Component video signals that will be recognized are 480i, 480p, 720p, and 1080i.
Because each  Y, PB, and PR signal is input independently, the Component signal allows for more accurate 
color reproduction.
The Component signal output terminal indication will differ according to the output device (Y, P
B, PR). Please 
read the...

For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo16
How to connect the AV OUT Terminals
Recording Equipment
(S-VHS /VHS VCR)
VIDEO
AUDIO You can connect a  VCR to the AV OUT terminal to record the program you are viewing on-screen. An 
external monitor can also be connected to the AV OUT terminals. Connect the VCR as shown below.
Notes:
• This unit contains Video and Audio Outputs for the purpose of recording television programming...

17
Getting Start edHow to connect the Amplifier
Analog Audio Out
 Stereo  System 
(A Stereo Amplifier and Speakers) 
AUDIO To listen to the audio through a separate stereo system, connect an external audio amplifier to AUDIO OUT 
on back of unit.
Notes:
• AUDIO OUT terminals cannot be connected directly to external speakers.
• AV terminals will not output Component Video, PC/HDMI IN or SD card signals.
Audio Adjustments
• Select Speakers Off in Other adjust menu under Audio menu. (p. 41)
• Set amplifier...

For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo18
Use the diagram below to connect the Digital  Audio Output of your Projection Display to a Dolby Digital 
decoder.
  Dolby Digital 5.1 channel surround sound delivers digital-quality sound. Dolby Digital provides five discrete 
full-bandwidth channels for front left, front right, center, surround left and surround right, plus a LFE (Low Frequency 
Effect) subwoofer channel, For a...

19
Getting Start ed
HDMI OUT HDMI OUTAUDIO IN
How to connect the  HDMI input terminal
Recommended HDMI Connections
Follow the connection diagrams below for HDMI 
control of a single AV equipment such as a Panasonic 
DIGA-DVD recorder, RAM Theater or Player Theater 
system. Refer to page 56 for Setup Menu settings and 
additional control information.
• Optional HDMI and/or optical cables are not provided.
If connection (or setting) of equipment compatible with 
HDMI control is changed, switch the power of...

For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo20
Installation (continued)