Panasonic Multimedia Projection Display Pt 50lc13 Operating Instructions

							51
Advanced Op er a tion
US TV PROGRAMS RATINGS: Chart 1
   
Reset User’s Memory Functions



          	 
   
      
   
    	 
  
   
      
     



    	 
  	 
   
 
       
         	 

   
    
       


	

	

	




	
 

Temporarily deactivate V-Chip control
Enter your secret code in the blocking message 
screen.
•   V-Chip control is reactivated when power is turned off or 
power failure occurs.
US TV PROGRAMS RATINGS: Chart 2
Use when moving unit to a new location, or if the secret 
code is forgotten.
While the OSD at right 
is displayed, press the 
VOL- button on the 
projection display and 
ACTION button on the 
Remote control at 
same time for more 
than 5 seconds. When 
reset is fi 
nished, power 
shuts off automatically.
Lock Feature
GGENERAL AUDIENCE:
All ages admitted.
PGPARENTAL GUIDANCE SUGGESTED:
Some materials may not be suitable for 
children.
PG-13PARENTS CAUTIONED:
Some materials may be inappropriate for 
children under 13.
RRESTRICTED
Children under 17 must be accompanied by 
a parent or adult.
NC-17OVER AGE 17 ONLY:
No one 17 and under admitted
X ADULTS ONLY:
Blocking MessageUS MOVIES RATINGS:
TV-YFOR ALL CHILDREN:
Content specifi 
cally geared to young viewers 
ages 2- 6.
TV-Y7FOR AGE 7 AND OLDER:
May contain mild physical or comedic 
violence which may frighten children under 7.
TV-GGENERAL AUDIENCE:
Contains little or no violence, strong 
language, or sexual dialogue or situations.
TV-PGPARENTAL GUIDANCE:
May contain infrequent coarse language, 
limited violence, some suggestive sexual 
dialogue and situations.
TV-14PARENTS CAUTIONED:
May contain sophisticated themes, sexual 
situations, strong language, and more 
intense violence.
TV-MAMATURE AUDIENCE:
May contain mature themes, profane 
language, graphic violence, and sexual 
situations.
FV Fantasy Violence
V Violence
S Sexual Situations
L Adult Language
D Sexually Suggestive Dialogue
          LOCK
   ENTER 4-DIGIT CODE
 ENTER :0-9
                EXIT 
						

							52For assistance, please call : 1-888-VIEW PTV(843-9788)
CAPTION MODE
Activates the On-Screen Closed Caption feature. When activated this feature will 
remain on until OFF is selected in this menu.
Closed Caption Modes from which to Choose
Caption Mode: CAP C1 or C2
A narration of selected TV programs is displayed.
Check TV program listings for C. C. (Closed Caption) broadcasts.
Caption Mode: TEXT C1 or C2
The lower half of the screen will be blocked out. When the TV station broad casts 
information, such as program listings, it will appear in this space.
Caption Mode: OFF
Closed Caption /Text narration will not be displayed.
1
2
Press the ACTION button to display the MENU screen and select SET UP.
Press to select 
CAPTION.
Press to display the 
CAPTION screen.
Press re peat ed ly to 
select CAPTION 
MODE. Press to select 
CAPTION MODE.
Press to exit menu.3
This receiver has a built in decoder that provides a visual depiction of the audio portion of a television 
program in the form of written words across the screen (white or colored letters on a black background). It 
allows the viewer to read the dialogue of a television program or other information.
Closed Captions
Note:
The closed caption or text signal 
may be broadcast over C1, C2, 
or both. Also, text contents can 
vary so you may wish to try 
different settings.
 ADJUST  SET UP
    LANGUAGE :ENGLISH
    CHANNEL
    LOCK
    CAPTION
    VIDEO
    OTHER
     PAGE      SELECT
                END
        CAPTION
 CAPTION MODE : OFF
 CC ON MUTE   : CAP C1
               SELECT
                EXIT
NO (OFF)
CAP C1
TEXT C1
CAP C2
TEXT C2 
						

							53
Advanced Op er a tion
1
2
Press the ACTION button to display the MENU screen and select SET UP.
Press to select 
CAPTION.
Press to display the 
CAPTION screen.
Press re peat ed ly to select 
CC ON MUTE. Press to select 
CC ON MUTE.
Press to exit menu.3
CC ON MUTE
Activates the On-Screen Closed Caption feature, when the MUTE button on the Remote Control is pressed. To 
deactivate, press the MUTE button again.
Note:
This feature functions when the Closed Caption Mode is in the “OFF” position. The program being viewed must be broadcast 
with Closed Caption.
Notes:
•   The setting for CC ON MUTE is valid only when the CC MODE is OFF, CC MODE set to ON will override CC ON MUTE.
•   Closed Caption is not displayed if the input signal is COMPONENT VIDEO INPUT of 480P or more, or from RGB/DIGITAL IN.
Closed Captions
 ADJUST  SET UP
    LANGUAGE :ENGLISH
    CHANNEL
    LOCK
    CAPTION
    VIDEO
    OTHER
     PAGE      SELECT
                END
        CAPTION
 CAPTION MODE : OFF
 CC ON MUTE   : CAP C1
               SELECT
                EXIT
NO (OFF)
CAP C1
CAP C2 
						

							54For assistance, please call : 1-888-VIEW PTV(843-9788)
Station names, e.g. ABC, TNN, etc. so that they will appear when a channel is selected. Choose 24 preset 
names.
1
2
Press the ACTION button to display the MENU screen and select SET UP.
Press to select 
CHANNEL.
Press to display the 
SET UP CHAN NEL 
screen.
Press to display the 
CHANNEL CAP TION 
screen. Press to select 
CHANNEL CAPTION.
Press to exit menu.5
3
Press to move cursor 
to the right. Press to select a 
station.
•  Repeat step 3 and 4 until the Caption List is complete.
4
Press to set. Press to select 
channel number.
To remove a registered channel number, select the station, 
then press the ◄ button (CLEAR).
To make a correction, press the ◄ button.
Channel Caption Feature
     SET UP CHANNEL
 ANTENNA : CABLE
 AUTO SET
 MANUAL SET
 CHANNEL CAPTION
 WEAK SIGNAL DISPLAY:OFF
               SELECT
                EXIT
 ADJUST  SET UP
    LANGUAGE :ENGLISH
    CHANNEL
    LOCK
    CAPTION
    VIDEO
    OTHER
     PAGE      SELECT
                END
    CHANNEL CAPTION  
                     1/4
      ABC
      CBS
      FOX
      NBC
      PBS
      CNN
               SELECT
                EXIT
    CHANNEL CAPTION  
                     1/4
      ABC     02
      CBS
      FOX
      NBC
      PBS
      CNN
   CANCEL      SELECT
                EXIT 
						

							55
Advanced Op er a tion
1
2
Press the ACTION button to display the MENU screen and select SET UP.
ON:  Picture is displayed regardless of signal condition, and may not 
always be clearly visible.
OFF:  Screen turns solid blue when signal is absent or weak. 
(Screen turns solid black during PIP or SPLIT functions.)Press to select 
CHANNEL.
Press to display 
the SET UP 
CHAN NEL 
screen.
Press to set 
“ON” or “OFF”. Press to select 
WEAK SIG NAL 
DISPLAY.
Press to exit menu.3
Note:
If unit is connected to equipment which has blue back feature, selecting “ON” will have no effect on the other equip ment.
When “ON” is selected, the picture is displayed even when a broadcast signal is weak or non- existent.
Weak Signal Display Feature
     SET UP CHANNEL
 ANTENNA : CABLE
 AUTO SET
 MANUAL SET
 CHANNEL CAPTION
 WEAK SIGNAL DISPLAY:OFF
               SELECT
                EXIT
 ADJUST  SET UP
    LANGUAGE :ENGLISH
    CHANNEL
    LOCK
    CAPTION
    VIDEO
    OTHER
     PAGE      SELECT
                END 
						

							56For assistance, please call : 1-888-VIEW PTV(843-9788)
1
2
Press the ACTION button to display the MENU screen and select SET UP.
ON:  When signal is noisy
OFF:  When signal is high-qualityPress to select 
VIDEO.
Press to display 
the VIDEO screen.
Press to set “ON” 
or “OFF”. Press to select 
VIDEO NR.
Press to exit menu.
3
In the event of weak signal conditions, the Video NR circuitry reduces noise in the luminance channel. It is 
important to note that Video NR should remain OFF for maximum picture detail when receiving a strong 
signal or viewing high-quality video.
Note:
When an RGB/DIGITAL IN signal is input, VIDEO NR is set to OFF only.
Video NR (Noise Reduction) Feature
 ADJUST  SET UP
    LANGUAGE :ENGLISH
    CHANNEL
    LOCK
    CAPTION
    VIDEO
    OTHER
     PAGE      SELECT
                END
         VIDEO
 VIDEO NR  :OFF
 ID-1      :OFF
 480P COLOR MATRIX:SDTV
 RGB       :VGA
 3D Y/C    :ON
 3D IP     :ON
               SELECT
                EXIT 
						

							57
Advanced Op er a tion
1
2
Press the ACTION button to display the MENU screen and select SET UP.
ON:  When screen size specifi 
cation 
signals are detected, screen 
size is automatically changed.
OFF:  The screen size is not 
au to mat i cal ly changed. (Turn 
OFF if this function does not 
op er ate properly.) If the received signal contains screen size specifi 
cations in RF, VIDEO INPUT (1–3) or COM PO NENT VIDEO 
INPUT (1– 4), the screen size is automatically changed.
Press to select 
VIDEO.
Press to display the 
VIDEO screen.
Press to set 
“ON” or “OFF”. Press to select 
ID-1.
Press to exit menu.3
Notes:
•  When  ID-1 is detected and screen size is changed, Aspect mode will be displayed.
•   When displaying split screen, ID-1 is not detected.
Setting when 480p signals are in put through COM PO NENT VID EO INPUT
Adjust 480p signals to achieve a natural color from digital equip ment connected to COMPONENT VIDEO 
INPUT (Y, P
B, PR input terminals).
1
2
Press the ACTION button to display the MENU screen and select SET UP.
SDTV :  When the input signal is a 
normal TV system (NTSC).
HDTV :  When the input signal is a 
High-Defi 
nition system (HD). Press to select 
VIDEO.
Press to display the 
VIDEO screen.
Press to select 
480P COLOR 
MATRIX.
Note:
480p COLOR MATRIX does not need to be set when using Hi-Defi 
nition equipment or 480i 
output equip ment.
Press to set “SDTV” 
or “HDTV”.
Press to exit menu.
3
Automatically changing screen size
 ADJUST  SET UP
    LANGUAGE :ENGLISH
    CHANNEL
    LOCK
    CAPTION
    VIDEO
    OTHER
     PAGE      SELECT
                END
         VIDEO
 VIDEO NR  :OFF
 ID-1      :OFF
 480P COLOR MATRIX:SDTV
 RGB       :VGA
 3D Y/C    :ON
 3D IP     :ON
               SELECT
                EXIT
 ADJUST  SET UP
    LANGUAGE :ENGLISH
    CHANNEL
    LOCK
    CAPTION
    VIDEO
    OTHER
     PAGE      SELECT
                END
         VIDEO
 VIDEO NR  :OFF
 ID-1      :OFF
 480P COLOR MATRIX:SDTV
 RGB       :VGA
 3D Y/C    :ON
 3D IP     :ON
               SELECT
                EXIT 
						

							58For assistance, please call : 1-888-VIEW PTV(843-9788)
1
2
Press the ACTION button to display the MENU screen and select SET UP.
VGA :  When RGB/DIGITAL IN input signal is VGA 60Hz from PC.
480P :  When RGB/DIGITAL IN input signal is 480P from other equipment.
AUTO:  VGA /480P input signals are distinguished automatically. 
(DIGITAL IN only)Press to select 
VIDEO.
Press to display 
the VIDEO screen.
Press to set 
“VGA” or “480P”. Press to select 
RGB.
Press to exit menu.3
Set the signal to be input to the projection display’s RGB IN or DIGITAL IN terminal. Most of analog 
RGB/DIGITAL IN signals are selected automatically. When RGB/DIGITAL IN input signal is VGA 60Hz from 
PC or 480P from other equipment, you must manually switch to the desired input.
RGB/DIGITAL IN Input Feature
 ADJUST  SET UP
    LANGUAGE :ENGLISH
    CHANNEL
    LOCK
    CAPTION
    VIDEO
    OTHER
     PAGE      SELECT
                END
         VIDEO
 VIDEO NR  :OFF
 ID-1      :OFF
 480P COLOR MATRIX:SDTV
 RGB       :VGA
 3D Y/C    :ON
 3D IP     :ON
               SELECT
                EXIT
         VIDEO
 VIDEO NR  :OFF
 ID-1      :OFF
 480P COLOR MATRIX:SDTV
 DIGITAL IN:VGA
 3D Y/C    :ON
 3D IP     :ON
               SELECT
                EXIT
When DIGITAL IN signal is input. 
Press to set  Press to select 
DIGITAL IN.
AUTO
VGA
480P
Or
Note:
Select VGA /480P manually if picture appears unnatural in AUTO.When RGB signal is input.  
						

							59
Advanced Op er a tion
1
2
Press the ACTION button to display the MENU screen and select SET UP.
ON:  Usually set to ON.
OFF:  Set to OFF if picture appears 
unnatural. Accurate separation of the picture’s brightness and color signals allows you to enjoy a beautiful picture.
Press to select 
VIDEO.
Press to display the 
VIDEO screen.
Press to set 
“ON” or “OFF”. Press to select 
3D Y/C.
Press to exit menu.3
 ADJUST  SET UP
    LANGUAGE :ENGLISH
    CHANNEL
    LOCK
    CAPTION
    VIDEO
    OTHER
     PAGE      SELECT
                END
         VIDEO
 VIDEO NR  :OFF
 ID-1      :OFF
 480P COLOR MATRIX:SDTV
 RGB       :VGA
 3D Y/C    :ON
 3D IP     :ON
               SELECT
                EXIT
3D Y/C Feature
3D IP Feature
1
2
Press the ACTION button to display the MENU screen and select SET UP.
ON:  Recordings created at 24 
frames per second are shown 
in higher quality.
OFF:  Set to OFF if picture appears 
unnatural. Film media (taken at 24 frames per second) is faithfully reproduced on the projection display.
Press to select 
VIDEO.
Press to display the 
VIDEO screen.
Press to set 
“ON” or “OFF”. Press to select 
3D IP.
Press to exit menu.3
 ADJUST  SET UP
    LANGUAGE :ENGLISH
    CHANNEL
    LOCK
    CAPTION
    VIDEO
    OTHER
     PAGE      SELECT
                END
         VIDEO
 VIDEO NR  :OFF
 ID-1      :OFF
 480P COLOR MATRIX:SDTV
 RGB       :VGA
 3D Y/C    :ON
 3D IP     :ON
               SELECT
                EXIT 
						

							60For assistance, please call : 1-888-VIEW PTV(843-9788)
1
2
Press the ACTION button to display the MENU screen and select SET UP.
Press to select 
OTHER.
Press to display 
the OTHER 
screen.
Press re peat ed ly 
to select  the 
desired time. Press to select 
SLEEP 
TIMER.
Press to exit menu.3
The projection display can be set to shut itself off at a preselected time.
 ADJUST  SET UP
    LANGUAGE :ENGLISH
    CHANNEL
    LOCK
    CAPTION
    VIDEO
    OTHER
     PAGE      SELECT
                END
         OTHER
 SLEEP TIMER:OFF
 DEMO MODE  :OFF
               SELECT
                EXIT
OFF
30min
60min
90min
Sleep Timer Feature
Note:
•   Pressing RECALL with sleep timer set displays remaining time.
•   Minutes remaining is displayed for the last 3 minutes before shutoff.