Panasonic Multi Porpose Camera Ak Hc1500g Operating Instructions

- 40 (E) -
ENGLISH

Setting of menu items
 MAINTENANCE menu
MATRIX TABLE [A, B]
For selecting the table in which the matrix data 
is to be stored.
MATRIX R-G [–31 to +31]
MATRIX R-B [–31 to +31]
MATRIX G-R [–31 to +31]
MATRIX G-B [–31 to +31]
MATRIX B-R [–31 to +31]
MATRIX B-G [–31 to +31]
For adjusting the color tone of each color 
phase.
[11] MATRIX 

- 41 (E) -

Setting of menu items
 MAINTENANCE menu
R SAT/PHASE [–63 to +63]
Mg  SAT/PHASE [–63 to +63]
B  SAT/PHASE [–63 to +63]
Cy  SAT/PHASE [–63 to +63]
G  SAT/PHASE [–63 to +63]
Yl  SAT/PHASE [–63 to +63]
R-Mg  SAT/PHASE [–63 to +63]
Mg-B  SAT/PHASE [–63 to +63]
B-Cy  SAT/PHASE [–63 to +63]
Cy-G  SAT/PHASE [–63 to +63]
G-Yl  SAT/PHASE [–63 to +63]
Yl-R  SAT/PHASE [–63 to +63]
For adjusting the color tone of each color 
phase.
[12] COLOR CORRECTION 

- 4 (E) -
ENGLISH

Setting of menu items
 SETTING menu
D5600K [OFF, ON] : 
When the VIDEO MENU is selected
LIGHTING [TUNGSTEN, DAYLIGHT]: 
When the FILM MENU is selected
For electrically compensating for a color 
temperature of approximately 5,600K.
GAIN SELECT
[LOW, MID, HIGH, S.GAIN1 to 3]
For selecting LOW, MID, HIGH, S.GAIN1, 
S.GAIN or S.GAIN as the gain setting.
CAM ID [OFF, BAR, ON]
For selecting how the camera ID is to be 
displayed.OFF:  The camera ID is not displayed.
BAR:...

- 4 (E) -

Setting of menu items
CAM ID POSI [0 to 3]
For selecting where the camera ID is to be 
displayed.0: top left, 1: top right, : bottom left, 
 
: bottom right
MATRIX TABLE [OFF, A, B]
For selecting OFF, A or B as the matrix setting.
COLOR CORRECTION [OFF, ON]
For turning the color correction function ON or 
OFF.
DIGITAL EXTENDER [OFF, ON]
For digitally doubling the images when set to 
ON.
BAR SEL
[FULL (16:9), FULL (4:3), SMPTE (16:9), 
SMPTE (4:3), ARIB]
For selecting the color...

- 44 (E) -
ENGLISH

Setting of menu items
FORMAT
[720/60p, 59.94p, 50p, 1080/60i, 59.94i, 50i, 
1080/30p, 29.97p, 25p, 24p, 23.98p]
For selecting the video output format.
The format is switched when the ENTER 
operation is performed.
 SETTING menu
[1] MODE
STATUS [OFF, ON]
For turning the AWB/ABB operation displays 
ON or OFF.
The status displays are as follows.
AWB ACTIVE: 
    While automatic white balance is being 
executed.
AWB OK: 
    When the automatic white balance has 
been adjusted...

- 45 (E) -

ABB OK: 
    When the automatic black balance has 
been adjusted satisfactorily.
OUT RANGE RGB: 
    When the automatic black balance has 
not been adjusted satisfactorily. 
(“RGB” denotes the colors which were 
not balanced properly.)
MENU ON BAR [OFF, ON]
For selecting whether the menu is to be 
displayed with the color bars.
Switching from ON to OFF or vice versa is not 
possible when color bars have been set.
MENU SEL [VIDEO MENU, FILM MENU]
For selecting the menu display.
FAN [OFF,...

- 46 (E) -
ENGLISH

Setting of menu items
 SETTING menu
SHUTTER MODE [OFF, ON, SYNCHRO]
For selecting the operation mode of the 
shutter.OFF:   For turning the shutter OFF.
ON:     For setting the shutter speed 
which was set by SHUTTER 
SPEED.
SYNCHRO:    For setting the shutter speed 
which was set by SYNCHRO 
SCAN.
SHUTTER SPEED
[1/100, 1/120, 1/250, 1/500, 1/1000, 1/2000 
(VIDEO MENU)]
[180.0 deg, 172.8 deg, 144.0 deg, 120.0 deg, 
90.0 deg, 45.0 deg (FILM MENU)]
For setting the shutter speed at the...

- 47 (E) -

Setting of menu items
 SETTING menu
GEN-LOCK INPUT [BNC, DSUB]
For selecting whether the sync signals are to 
be input from the BNC or D-SUB connector.
H PHASE-COARSE
[–40 to +40 (720 mode)]
[–60 to +60 (1080 mode)]
For roughly adjusting the horizontal phase.
H PHASE-FINE [–45 to +45]
For finely adjusting the horizontal phase.
SD  HD PHASE CRS [–4 to +4]
For roughly adjusting the phase of the HD 
video signals when SD sync signals have been 
input.
SD  HD PHASE FINE [–99 to +99]
For...

- 48 (E) -
ENGLISH

Setting of menu items
 SETTING menu
PROTOCOL [1 to 4]
For selecting the remote control 
communication system in accordance with the 
system connected.
1:   Information camera communication 
protocol (EIA4)
 
For connecting the AK-HRP150
2:    Information camera communication 
protocol (EIA)
 
For connecting a PC
3:    Convertible PC control protocol (EIA4)  
For connecting the AW-CB400  
(baud rate fixed at 9600 bps)
4:    Convertible PC control...

- 49 (E) -

Setting of menu items
 CAMERA ID menu
An ID of not more than 10 characters 
consisting of alphanumerics, symbols and 
spaces can be set for the camera.
The camera ID is displayed at all times when 
ON is selected in the CAM ID mode but 
displayed only when color bar signals are 
output in the BAR mode.
The status for setting the ID is established 
by moving the cursor above the colon (:) and 
selecting it.
Move the cursor to the positions of the 
characters to be set, select the characters...