Panasonic Multi Porpose Camera Ak Hc1500g Operating Instructions

- 0 (E) -
ENGLISH

Setting of menu items
 MAINTENANCE menu
M KNEE POINT
[80.00% to 107.00% (VIDEO MENU)]
[30% to 90% (FILM MENU/VIDEO REC)]
For adjusting the knee point.
R KNEE POINT [–25.00% to +25.00%]
For correcting the knee point of the red in 
relation to the master knee point.
B KNEE POINT [–25.00% to +25.00%]
For correcting the knee point of the blue in 
relation to the master knee point.
M KNEE SLOPE
[00 to 99 (VIDEO MENU)]
[150% to 600% (FILM MENU)]
For adjusting the knee slope.
R KNEE...

- 1 (E) -

Setting of menu items
A. KNEE POINT [80.00% to 107.00%]
For setting the auto knee break point position.
This setting does not take effect when a setting 
other than AUTO is selected for KNEE or 
ON is selected as the DRS setting when the 
VIDEO MENU has been selected or when the 
FILM MENU has been selected.
A. KNEE LEVEL [100% to 109%]
For setting the maximum level of auto knee.
This setting does not take effect when a setting 
other than AUTO is selected for KNEE or 
ON is selected as...

-  (E) -
ENGLISH

Setting of menu items
 MAINTENANCE menu
[4] KNEE, WHITE CLIP
KNEE [OFF, MANUAL, AUTO]
For selecting the knee operation mode.
This setting does not take effect when FILM 
REC is selected.
WHITE CLIP [OFF, ON]
For tuning white clip ON or OFF.
HIGH COLOR  [OFF, ON]
For improving the color reproducibility of the 
high-brightness areas when it is set to ON.
This setting does not take effect when a setting 
other than MANUAL is selected for KNEE or 
ON is selected as the DRS...

-  (E) -

Setting of menu items
 MAINTENANCE menu
DETAIL [OFF, ON]
For turning all the detail functions ON or OFF.
TOTAL DTL LEVEL [–31 to +31]
For setting the H DTL and V DTL levels.
H DTL LEVEL [0 to 63]
For setting the H DTL level.
CRISP [0 to 31]
For setting the noise elimination level of the 
detail signals.
LEVEL DEPENDENT [0 to 15]
For removing the detail in the dark areas.
PEAK FREQUENCY [00 to 31]
For setting the H DTL peak frequency.
KNEE APERTURE [OFF, ON]
For turning the...

- 4 (E) -
ENGLISH

Setting of menu items
SLIM DETAIL [OFF, ON]
For setting the detail more finely at ON.
DETAIL(+) [–31 to +31]
For adjusting the detail gain in the + direction.
DETAIL(–) [–31 to +31]
For adjusting the detail gain in the – direction.
DETAIL CLIP [0 to +63]
For minimizing the glare caused by adding 
too much detail as a result of a detail clip 
adjustment.
DETAIL SOURCE
[(G+R)/2, (G+B)/2, (2G+B+R)/4, (3G+B)/4,  
R, G]
For setting the ratio of the RGB signal 
components which create...

- 5 (E) -

Setting of menu items
 MAINTENANCE menu
SKIN TONE DTL [OFF, ON]
For turning the SKIN TONE DTL ON or OFF.
SKIN GET [OFF, ON]
When ON is selected, the box cursor is output 
to the screen center. When the image of the 
subject’s skin is placed inside the box cursor 
and the ENTER operation is performed,  
I CENTER and Q PHASE are set automatically.
SKIN DTL CORING [0 to 7]
For setting the SKIN TONE DTL coring 
amount.
Y MAX [0 to 255]
For setting the upper limit of the brightness in 
the...

- 6 (E) -
ENGLISH

Setting of menu items
 MAINTENANCE menu
[8] GAIN, AUTO IRIS
LOW GAIN [–6 dB to 30 dB]
MID GAIN [–6 dB to 30 dB]
HIGH GAIN [–6 dB to 30 dB]
For setting the amount by which the gain is to 
be increased when LOW, MID or HIGH has 
been selected by GAIN SELECT.
A.IRIS LEVEL [0 to 100]
For adjusting the target level (brightness) of 
the auto iris.
A.IRIS PEAK/AVE [0 to 100]
For setting the ratio between the auto iris  
light-metering peak value and average value.
A.IRIS WINDOW [NORM1,...

- 7 (E) -

Setting of menu items
 MAINTENANCE menu
These settings are performed when S.GAIN1, 
S.GAIN or S.GAIN has been selected by 
GAIN SELECT.
MODE [S.GAIN1, S.GAIN2, S.GAIN3]
For selecting the S.GAIN storage table.
TOTAL GAIN [0 dB to 72 dB]
For displaying the total gain for GAIN, PIX MIX, 
V MIX and FRAME MIX.
GAIN [0 dB to 36 dB]
For setting the gain increase.
PIX MIX [OFF, +6 dB]
For setting the addition of horizontal pixels ON 
or OFF.
V MIX [OFF, +6 dB]
For setting the addition...

- 8 (E) -
ENGLISH

Setting of menu items
 MAINTENANCE menu
[9] SUPER GAIN
LEVEL DEPENDENT [0 to 15]
For removing the detail in the dark areas.  
The higher the number set, the wider the 
range in which the detail is removed.
PEAK FREQUENCY [0 to 31]
For setting the H DTL peak frequency.
M GAMMA
[0.35 to 0.75 (DRS OFF)]
[–10 to +10 (DRS ON)]
For adjusting the gamma characteristics.
M PED OFFSET [–200 to +200]
For adjusting the amount of offset in the  
black level.
R PED OFFSET [–200 to +200]
For...

- 9 (E) -

Setting of menu items
 MAINTENANCE menu
SCAN REVERSE [OFF, REVERSE1 to 3]
For selecting the video output scanning 
method.OFF:   Normal scanning
REVERSE1:  Left/right reversed
REVERSE:  Top/bottom reversed
REVERSE:    Top/bottom and left/right 
reversed
FRAME RATE RANGE [60-6, 60-4]
For selecting the range over which the frame 
rate can be varied with variable frames.
60-6:  60 to 6 frames per second
60-4:  60 to 4 frames per second
FRAME RATE [60 to 4]
For setting the frame...