Panasonic Multi Media Projection Display Pt 40lc12 Operating Instruction

31
Basic Operation
ASPECT Controls
Notes:
• The screen size changes if ID-1 is detected. (P. 55)Mode
NORMAL will display a 4:3 picture at its standard
4:3 size. Picture
ZOOM
FULL NORMAL
JUSTExplanation
ZOOM mode magnifies the central section of the
picture. JUST mode will display a 4:3 picture at maxi-
mum size but with aspect correction applied to
the center of the screen so that elongation is
only apparent at the left and right edges of the
screen. The size of the picture will depend on the
original...

32For assistance, please call : 1-888-VIEW PTV(843-9788)
Searching for the desired channel (Channel search)
When the SEARCH/REC button is pressed during
single screen.
When a channel button is pressed during
channel search.
• Number keys:
Example: When 6 is pressed, channel 6 is displayed in single
screen.
• Channel up and down buttons:
When 
 or  button is pressed, the next channel up or down is
displayed in single screen.
Sound from the left screen is
output from the speakers on the
projection display...

33
Basic Operation
Playing peripheral equipment
VCR
DVD player
This equipment can also be
connected to the rear terminals.
See Connections for details.
Turning the power on and switching input modes
Turn the projection
display on.
1
2
The input mode
changes each time
this button is pressed.
* No input mode is
displayed for terminals
with no equipment
connected.
3Operate the connected equipment.
Confirming connections
A video camera uses the Input 3 terminal on the front of the projection display.
Video...

34For assistance, please call : 1-888-VIEW PTV(843-9788)
Press this button to mute the sound. Press again to
reactivate sound. Sound is also reactivated when power
is turned off or volume level is changed.
Projection can be switched between a frozen (still)
picture and a moving picture each time the FREEZE
button on the remote control unit is pressed. Press
FREEZE button again to resume motion.
Mute / Freeze / SAP
Sound mute
Useful when answering the phone or receiving
unexpected visitors
Freezing...

35
Basic Operation
The following are possible broadcast types with their accompanying on-screen displays. The signal being
received is indicated with a “ 
 ” mark while the selected audio mode is indicated with an arrow. To change the
audio mode for these broadcasts, follow the “Select Audio Mode for TV Viewing” section (below.)
MTS Stereo and SAP broadcast
Multi-channel Television Sound Stereo (main language) and Secondary
Audio Program (sub language) broadcasts are both being received
simultaneously....

36For assistance, please call : 1-888-VIEW PTV(843-9788)
Notes:
• Sound from the Left screen is output from
the speakers on the projection display set.
• When the screen is split, signals of the Left
screen are output from the rear monitor
output terminal.
• The left and right screens are processed by
individual circuits and, therefore, may
slightly vary in image quality.
• Split screen returns to single screen when
the projection display is turned off.
• With the Left screen, as with a single
screen,...

37
Basic Operation
Swapping left and right screens
Example:
During SPLIT SCREEN NORMAL.
Split screen
CH05CH03
CH03CH05
Changing the channel of the right screen
1
CH03CH05
CH03CH06
Press to swap.
Example:
During SPLIT SCREEN NORMAL.
Note:
When outside input is finished, the lowest regis-
tered channel number is displayed. For faster
selection, press the SWAP button to change the
screen to the left. Then, press the TV/VIDEO button
to directly change the input. Finally, press SWAP
button again to change the...

38For assistance, please call : 1-888-VIEW PTV(843-9788)
CH03
PIP CH05
Picture in Picture (PIP) Screen
You can view two pictures simultaneously using two tuners and picture in picture (PIP) display function.
Display PIP screen
Press to split
(The previously selected screen appears on the Main.)
• Returning to one screen.
Press to return.
Main screen
(Main picture)
PIP screen
(Sub picture)
Notes:
• Sound from the Main screen is output from the speakers on the
projection display set.
• In PIP mode, the...

39
Basic Operation
Picture in Picture (PIP) Screen
Swapping Main and PIP screens
Press to swap.
Changing the channel of the PIP screen
Move PIP screen
You can move the PIP screen to four positions.
Press repeatedly
to select PIP
position.
CH03
PIP CH05
CH03
PIP CH06
CH03
PIP CH05
CH05
PIP CH03
Press to select the desired channel.
Example:
During Main screen NORMAL.Example:
During Main screen NORMAL.
Selecting the screen size for PIP screen
You can choose PIP screen size of 3 magnifications.
Press...

40For assistance, please call : 1-888-VIEW PTV(843-9788)
Adjusting screen position and size
4
Press the ACTION button to display the MENU screen and select
ADJUST.
Press to select
POSITION/SIZE.
Press to display
POSITION/SIZE.
Press to adjust
POSITION/SIZE.
2
3
PAGE SELECT
ENDRECALL
P U T E S
H S I L G N E : E G A U G N A L
L E N N A H C
K C O L
N O I T P A C
O E D I V
PAGE SELECT
ENDRECALL
T S U J D APU T E S
E R U T C I P
O I D U A
E Z I S / N O I T I S O P
N O I T A M R O F N I
Press to select the...