Panasonic Multi Format Live Switcher Av Hs450n Operating Instructions

21
2. Functions in each area
  AUX bus crosspoint buttons
These buttons are used to select the source of the bus which was selected by the AUX bus selector button ( 
).
Buttons 1 to 32 can be selected using the [SHIFT] button.
 Refer to  “3-1-2. Selecting the bus using the SHIFT function”. 
2-1-2.   Wipe pattern/memory area

 Wipe pattern and memory selector buttons
Wipe patterns 1 to 12 can be selected while the BKGD and KEY 
pattern selector buttons ( 
) are lighted.
Data can be stored in the...

22
2. Functions in each area
2-1-3.  User button area

 User buttons [USER1 to USER6]
These are used to assign some functions of the menu settings to the [USER1] 
to [USER6] buttons on the CONFIG menu.
 See “5-3-1. Setting the user buttons”. 123
456
USER

2-1-4.   Transition area8 9
10 XPT DSBL EFF DSLV
MIX
WIPE
ON
DSK1ON DSK2
ON
PinP1
ON PinP2
ON
KEY
ON FTB
ON
N/R R
BKGD KEY MIX WIPE
CUT AUTO
UNDO KEY
PAT T10 12
MEMORY / PATTERN
11
WIPE DIRECTION










 [BKGD]  button
This...

23
2. Functions in each area
 [MIX]  button
This is used to switch the A and B bus images while making them overlap.
During the transition, the A and B bus output total is kept at 100 %.
When the [MIX] button is pressed and it is selected, its indicator lights in amber.
If the [WIPE] button ( 
) is now pressed, it goes off, and the de-selected status is established.
 [WIPE]  button
This is used to execute the transition using the pattern selected by the wipe pattern selector button ( 
).
When the...

24
2. Functions in each area
  Wipe direction selection buttons [WIPE DIRECTION N/R, R]
These buttons are used to select the direction in which to wipe for executing background transitions.
  When the [R] indicator is off:
     Wiping proceeds in the normal direction.
  When the [R] indicator is lighted:
     Wiping proceeds in the reverse direction.
  When the [N/R] indicator is lighted:
    The normal direction is replaced with the reverse direction (or vice versa) when the transition is 
completed....

25
2. Functions in each area
2-1-5.  LCD menu area
POWER
ALARM
F1F2F3F4F5
KEY PinP 1/2 DSK 1/2 AUX1 AUX2 AUX3 AUX4
KEY HOLD
MENU FUNCTION / AUX BUS DELEGATION
CKEY
BKGD
PinP1
PinP2 DSK1
DSK2 TIME
CBGDIMAGE A
IMAGE BFMEMSDCardCTL
CAM XPT
MV IN
OUTCONFIGSYSAMBER:1 / GREEN :2


  LCD
The setting menu is displayed when one of the menu function buttons ( 
) is pressed. 
When the buttons listed below are double-clicked, the specified menu is selected. (The menu delegation 
function)
The operation...

26
2. Functions in each area
 Menu function buttons [MENU FUNCTION/AUX BUS DELEGATION]
These are used to select the menus organized by function.
Each time one of these buttons is pressed, the menu for its function is switched between the one displayed 
above and the one displayed below. Each time the [PinP1/PinP2] button or [DSK1/DSK2] button is pressed, the 
color used for their lighting is switched between amber and green. The other buttons light in amber.
 Rotary encoders [F1] to [F5]
These are used...

27
2. Functions in each area
2-1-6.  Positioner area
  Positioner [X/Y]
These are used when performing the settings below.
 
 PinP1, PinP2 position settings
 
 Wipe start position setting (WIPE #5, WIPE #11, SQ #5)
 
 Camera control
 
 Flying key position setting
 
 Chroma key marker position setting
POSITIONER Z


In each case, the settings take effect only when the following menu items have been selected.
The center values of the positioner are set during the time it takes for the unit to start...

28
2. Functions in each area
2-1-7.  SD memory card area

  SD memory card slot
Insert an SD memory card (purchased separately) or an SDHC memory card 
(purchased separately) into this slot.


  SD memory card access LED
This LED lights while the data on the SD memory card is being accessed.
Do not turn off the unit’s power or eject the SD memory card while the access LED is lighted. 
Doing so can damage the data on the SD memory card.
Concerning the recommended SD memory cards and SDHC memory cards...

29
2. Functions in each area
2-1-8.  Rear panel connections area
12V   IN 1TALLY / GPI MAINFRAMEOFF
ON12V   IN 2POWER
SIGNAL
GND
LCD CONTRAST
SERVICE NORMAL


 TALLY/GPI input/output connector [TALLY/GPI] (D-sub 25-pin, female, inch screw)
 For details on how to connect this connector, refer to “6. External interfaces”. 
 MAIN FRAME connector [MAIN FRAME] (RJ-45) (100 Base-TX)
Connect this to the mainframe using the supplied CAT5E cable (STP, straight, 10 m).
 DC power input sockets [12V...

30
2. Functions in each area
2-2.  Mainframe
2-2-1.   Front panel
Power supply 1 Power supply 2
POWER1POWER1
ALARM1 OFFPOWER2ON
OFF ONPOWER2ALARM2
Multi-format Live Switcher  AV-HS450






 Power switch [POWER1, POWER2]
These are used to turn the power on and off.
As a standard feature, this mainframe has a redundant power supply system.
To turn off the power, set the power switches of both system 1 (POWER1) and system 2 (POWER2) to OFF.
 Power indicator [POWER1, POWER2]
This indicator lights...