Panasonic Multi Format Live Switcher Av Hs400an Operating Instructions

41
3. Basic operations
3-4-5. PinP decorations
A border or soft effect can be added to PinP.1 
 Press the [FUNC] button to light its indicator, and press the [PinP] button to display the PinP menu.
2 
  Turn [F1] to display the Border sub menu.
  
Border Border Width Soft Mode
  2/6     Off     5.0     0.0     Fix
     On
    0.1
     |
  100.0    0.0
     |
  100.0    Var
3  Turn [F2] to set On (or Off) for the border using the Border item.
4 
  Turn [F3] to set the width of the border using the Width...

42
3. Basic operations
3-4-6. Trimming settings
1  Press the [FUNC] button to light its indicator, and press the [PinP] button to display the PinP menu.
2 
  Turn [F1] to display the Trim sub menu.
  
 
Trim Trim Manual
  5/6     Off    Free     4:3
 Manual
   Pair
3  Turn [F2] to select the trimming type using the Trim item.
  Off:  No tr
 imming
  4:3:  A
utomatic trimming so that the aspect ratio is 4:3
  Manual:  T
rimming using the value set on the TrimAdj sub menu
4 
  Turn [F3] to select the...

43
3. Basic operations
3-5. DSK (downstream key)
Characters or other images can be combined with the background image.
3-5-1. Selecting the DSK type
1  Press the [FUNC] button to light its indicator, and press the [DSK] button to display the DSK menu.
2 
  Turn [F1] to display the DSK sub menu.
3 
  Turn [F2] to select the Type item.
  
 
DSK Type Fill PVW
  1/7  Linear     Bus     Off
    Lum
  Matte     On
  Lum (luminance key/self key):
      This is for creating the key signals from the luminance...

44
3. Basic operations
3-5-2. Selecting the DSK material
   Selecting the DSK fill signal and DSK source signal
Press the [DSK] button in the AUX bus selection area to switch the selection of the DSK fill signal (indicator 
lights in amber) and DSK source signal (indicator lights in green).

While the indicator of the [DSK] button is lighted in 
amber, press one of the AUX bus crosspoint buttons 
1 to 10 to select the DSK fill signal.
The indicator of the selected AUX bus crosspoint 
button lights in...

45
3. Basic operations
3-5-3. DSK transitions
1  Set the duration of the transition.
    On the TIME menu, turn [F1] to display the DSK sub menu.
    As with a background transition, set the transition time.
2 
  When the [DSK] button in the transition area is pressed, the DSK image is 
combined (fade-in) for the transition time which was set.
 

  During fade-in, the indicator of the [DSK] button blinks in red, and it lights in red 
when the transition (fade-in) is completed.  
If the [DSK] button is...

46
3. Basic operations
3-5-6. DSK decorations
A border, shadow or other type of edge can be added to DSK.
 
 Setting the edge
1 
  Press the [FUNC] button to light its indicator, and press 
the [DSK] button to display the DSK menu. 
2 
  Turn [F1] to display the Edge sub menu.
3 
  Turn [F2] to select the edge type.
Off:  
  An edge is not added.
Border:  
  A border is added around the entire edge.
Drop:  
  A diagonal border is added.
Shadow:  
  A shadow is added.
Outline:  
  An outline (only a...

47
3. Basic operations
3-5-7. Masking the DSK signals
These steps are taken to mask the DSK signals using the mask signal of the box pattern.
1 
 Press the [FUNC] button to light its indicator, and press the [DSK] button to display the DSK menu.
2 
  Turn [F1] to display the Mask sub menu.
  
 
Mask Mask Invert
  6/7     Off     Off  Manual
    4:3
     On
3  Turn [F2], and select the masking method using the Mask item.
  Off: 
  The DSK signals are not masked.
  Manual: 
  The area that is set using the...

48
3. Basic operations
3-6. FTB (fade to black)
The user can fade out from a program image to the black screen or fade in to a program image from a black 
screen.1 
 Set the duration of the transition.
    On the TIME menu, turn [F1] to display the FTB sub menu.
    As with a background transition, set the transition time.
2 
  When the [FTB] button in the transition area is pressed, fade-out to the black 
screen is initiated.
 

  During fade-out, the indicator of the [FTB] button blinks in red, and it...

49
3. Basic operations
3-7. Internal color signals
3-7-1. Setting the color background
The color background to be used by the bus can be set.
Two methods are available: under one method the Hue (hue), Sat (color saturation) and Lum (luminance) are set, 
and under the other the 8 preset colors (white, yellow, cyan, green, magenta, red, blue and black) are called. 
The Hue, Sat and Lum of the called colors can also be adjusted.
 
 Adjusting the colors
1 
  Press the [FUNC] button to light its indicator,...

50
3. Basic operations
3-8. Freezing the input signals
The input signals can be frozen and used. If any of the input signals has been frozen, the freeze status indicator 
LED lights. While signals are frozen, the tally signals of the corresponding input will not be output.
3-8-1. Displaying the freeze status
1  Press the [FUNC] button to light its indicator, and press the [FREEZE] button to display the Freeze menu.
2 
  Turn [F1] to display the Status sub menu.
    Asterisks ( ) appear above the numbers...