Panasonic Multi Format Live Switcher Av Hs400an Operating Instructions

111
MenuSub menuParameter 1 Parameter 2 Parameter 3 Parameter 4Turn F1 to select.
Turn F2 to select. Turn F3 to select. Turn F4 to select. Turn F5 to select.
IN/OUT Input ParameterSignal FSMode ↓AnaGain
1/15 Setting range IN1 to 8 On, Off
Normal, UC, 
Auto, D by D−30 to +30
Default value  — OnNormal0
Output ParameterSignal OutputMode ↓
2/15 Setting range OUT1 to 6 PGM, PVW, AUX, 
Multi, KEYOutNormal, DC
Default value  —  —Normal
Ref ParameterSync ↓ BBSetup GenLock
3/15 Setting range
BBST, BBAD, 
TRI,...

112
MenuSub menuParameter 1 Parameter 2 Parameter 3 Parameter 4Turn F1 to select.
Turn F2 to select. Turn F3 to select. Turn F4 to select. Turn F5 to select.
IN/OUT DVIOut ParameterSignal Mode ↓Size ↓Scale ↓
12/15 Setting range OUT3, OUT5
Dig, AnaAuto, XGA, 
WXGA, SXGA, 
WSXGA+, UXGA, 
WUXGAFit-V, Fit-H, Full, 
5:4 (“5:4” can be 
selected when 
SXGA has been 
selected as the 
Size item setting.)
Default value  — DigAutoFit-V
UpConvt ParameterSignal Scale ↓MovDet ↓Sharp ↓
13/15 Setting range IN5 to 8...

113
MenuSub menuParameter 1 Parameter 2 Parameter 3 Parameter 4Turn F1 to select.
Turn F2 to select. Turn F3 to select. Turn F4 to select. Turn F5 to select.
SYSTEM Format ParameterMode ↓ 16:9SQ
1/16 Setting range
1080/59.94i, 1080/50i, 
720/59.94p, 720/50p, 
480/59.94i, 576/50i On, Off
Default value 1080/59.94i Off
System ParameterBusMode LCD-BL EditEN Protcol
2/16 Setting range A/B, 
PGM/PST On, Off
On, OffGVG-A, GVG-B, 
P/TCont, P/TDirt
Default value PGM/PST On OnGVG-A
CamCTL1 ParameterSignal...

114
MenuSub menuParameter 1 Parameter 2 Parameter 3 Parameter 4Turn F1 to select.
Turn F2 to select. Turn F3 to select. Turn F4 to select. Turn F5 to select.
SYSTEM Date ParameterYear MonthDateSet ↓
13/16 Setting range 2000 to 2099 1 to 12 1 to 31 —
Default value  —  — — —
Time ParameterHour MinuteSecondSet ↓
14/16 Setting range 0 to 23 0 to 590 to 59 —
Default value  —  — — —
MainVer ParameterSelect Version SysVer
15/16 Setting range Soft, Control, 
Panel, Input, M/E Version number
Version number
OptVer...

115
9. Appearance
Unit: inch (mm)
POWER
1REF
SLOT2
2
SLOT
4
2 34
SLOT1
1
SLOT2 8
～IN
SDI  INPUTS
TALLY
6
6
INPUTS
SDI  OUTPUTS
IN
OUT3
IN
OUT2
IN
OUT1
IN
OUT
OUTPUTS
15 7
SLOTOFF2
SLOT1 5
SLOT
SLOT
PGM RS-422
LAN ON
ANALOG INPUTS
Y Pb PrY Pb
Pr
DVI INPUTS
ANALOG OUTPUTS
Y Pb PrY Pb
Pr
DVI/ANALOG OUTPUTS
Y Pb PrDVI-IDVI-IDVI-I
GPISIGNAL
GND
POWER
ALARM
F1 F2F3F4F5
KEY DSK PinP AUX CLN PVW PGM 12
USER
AUX SOURCE
AUX BUS DELEGATION
1 2 3 4 5 6 7 8 9 10
AUX
PGM/A
PST/B
BKGD PATT KEY PATT FUNC N/RR
WIPE...

116
10. Specifications and standard accessories
Specifications
Inputs8 video input lines (maximum)
4 standard video input lines:
 
  SDI inputs  4
Maximum of an additional 4 video input lines as options:
 
   SDI inputs  2, analog component (HD/SD) inputs 2, DVI inputs 2,  
analog composite inputs 2
 

 
Up to two optional boards from among the various optional input boards 
(incorporating two up-converter lines) can be additionally connected.
Reference 1
Outputs 7 video signal lines (maximum)
3...

117
SDI outputsHD: Serial digital (SMPTE 292M)
SD: Component digital (SMPTE 259M)
BNC connector, PGM 1 (2 outputs), OUTPUT 1 to 6, up to 6 lines
 
  OUTPUT 3 to 6 are optional outputs.
HD [SMPTE 292M (BTA S-004B) standard complied with]
• Output retur
 n loss More than 15 dB (5 MHz to 750 MHz)
  More than 10 dB (750 MHz to 1.5 GHz)
• Output level   0.8 Vp-p 
10 % (75 )
• Rise time

  Less than 270 ps
• Fall time  Less than 270 ps
• Difference between rise time and fall time 
  Less than 100 ps
•...

118
Control I/OLAN (10BASE-T)
10 Mbps 1 (RJ-45)
Serial communication 
interface RS-422 1 (D-sub 9-pin, female, inch screw)
• 

  Pan-tilt head system (pan-tilt head and camera) control 
supported
• 

  GVG standard protocol subset supported
Tally output Open collector outputs (negative logic) 1 to 8 
(D-sub 15-pin, male, inch screw)
GPI GPI 2 (3.5 mm diameter stereo mini jack)
External media SD memory cards Memory size supported: Max. 2 GB
Still image file transfer: 
 

  24-bit uncompressed bitmap,...

119
Appendix (glossary)
Defined below are the terms used in this manual.
WordExplanation
AB Bus system A bus control mode. By executing a transition, the A bus and B bus signals 
are output to the program images alternately.
Ancillary Data The auxiliary data other than the video signals which is transmitted inside 
the data stream of the video serial interface. The data superimposed on the 
vertical blanking period is referred to as the V ancillary data (VANC).
Aspect ratio The ratio between the...

120
WordExplanation
Frame Memory A memory which can hold the video signals equivalent to one frame.
Frame Synchronizer A function which matches the synchronization of non-synchronized video 
input signals.
Freeze A function which continues the display of the same image, creating the 
impression that the image has been “frozen”.
FTB [Fade to Black] This is the effect where the background image is faded out to the black 
screen.
Genlock A function for synchronizing the video signals using an external sync...