Panasonic Monitor Bt Lh900 Owners Manual

11
How to use the on-screen menus
Four kinds of information—menus, status displays, image control settings and battery voltage—can be displayed on the
screen.
Menu display
This display appears when the MENU/EXIT button is
pressed.  If no further action is taken for the next 120
seconds, the display will be automatically cleared.
The position where the display appears on the screen can
be changed using the marker setting.
For details on the menu, refer to “MAIN MENU” (page 15).
 [MAIN MENU]
  MARKER...

12
How to use the on-screen menus
Battery voltage display
Concerning the signal formats
The battery voltage information is displayed all the time
when ON has been selected as the BATTERY REMAIN
item setting on the OSD screen of the main menu.
It indicates the voltage level of the battery.  If an Anton
Bauer digital battery is being used, its remaining level is
indicated as a number of “∫” blocks and as a percentage
along with the voltage value.
  DC150V       80%.
Image control display
The image control...

13
Menu operations
Menu operations
MENU/EXIT button
Use the HD ZOOM/Xbutton and BLUE/Wbutton to
move the cursor, and select the desired menu using the
FUNCTION/ENTER button.
1
2When the MENU/EXIT button is pressed, the main
menu appears on the screen.
 [MAIN]
  MARKER                4
  VIDEO CONFIG          4
  SYSTEM CONFIG         4
  OSD CONFIG            4
  GPI                   4
  INPUT SELECT          4
  CONTROL               4
     EXIT    SEL    ENTER1
MENUXWENTER
Use the HD ZOOM/Xbutton and...

14
User data
This monitor enables the menu settings and screen values which have been adjusted by the image controls to be saved in
five user data files which can then be loaded as required.
The following data can be saved and loaded as user data files:
≥All menu settings (including the function settings of the buttons at the front of the monitor) with the exception of USER
MODE LOAD/SAVE
≥Screen values which have been adjusted by the image controls
Saving the user data
Using menu operations (see page...

15
MAIN MENU
Menu configuration
MARKER  MARKER SELECT  MARKER 16:9
  MARKER 4:3
  GAMMA SELECT
  SHARPNESS H
  SHARPNESS V
  BATTERY REMAIN
  STATUS DISPLAY
  CRCC MESSAGE  MENU POSITION  STATUS POSITION  ROTARY POSITION
  COLOR TEMP.  SHARPNESS MODE
  CONTROL
  LOCAL ENABLE
  BACKLIGHT TIME
  SD ASPECT   I-P MODE  MONO
  BACKLIGHT
  FUNCTION
  WFM  HD ZOOM  PEAKING/PHASE  USER MODE LOAD
  GPI1
  GPI2
  GPI3  GPI4  GPI5
MAIN
VIDEO CONFIG
SYSTEM CONFIG
  MARKER BACK
  USER MODE SAVE
OSD CONFIG
GPI
INPUT...

16
MAIN MENU
The underlined setting indicates the factory setting mode.
Item Setting DescriptionItem Setting Description
MARKER SELECTMENU
GPIFor setting whether the marker display
settings are to be performed using the
menu or from the GPI connector.
MENU: The operations are performed using
the menu.  Operations from the GPI
connector are canceled.
GPI:The operations are performed from
the GPI connector.  The settings
established using the menu are
canceled.
MARKER 16:9OFF
4:3
13:9
14:9
VISTA
CNSCO
95%...

17
MAIN MENU
Types of markers
4:3 markers 13:9 markers
14:9 markers
95% area markers 93% area markers
90% area markers
80% area markers
95% area markers 93% area markers
90% area markers88% area markers
80% area markers
4:3 markers
(These appear when SD signals with a 4:3
aspect ratio are supplied.)
Dotted lines are displayed as the markers.
Center marker
Center marker
This appears at the center of the image.
16:9 markers
(These appear when HD signals or when SD
signals with a 16:9 aspect ratio are...

18
MAIN MENU
The underlined setting indicates the factory setting mode.
Item Setting DescriptionItem Setting Description
GAMMA SELECTGPI
NORMAL
FILM
For setting the gamma mode.
GPI:This is the GPI setting.  For
details, refer to “REMOTE
specifications” (page 22).
NORMAL:The normal gamma mode is
established.
FILM:The film mode that supports the
Varicam digital cine camera is
established.  The actual film mode
setting can be changed using the
FILM GAMMA item listed next.
COLOR TEMP.USER
D93
D65
D56
For...

19
Item Setting Description
GPI1-8UNDEF
MARKER1 ON/OFF
MARKER2 ON/OFF
MARKER BACK HALF
MARKER BACK BLACK
CENTER MARKER
INPUT SEL. SDI1
INPUT SEL. SDI2
INPUT SEL. VIDEO
INPUT SEL. YPBPR/RGB
SD ASPECT
HD ZOOM
BACKLIGHT MIN.
R.TALLY
G.TALLY
MONO ON/OFF
GAMMA SELECT
WFM ON/OFFFor allocating particular
functions to particular pins
when remote control
operations are to be
performed using the GPI
signals.  For details, refer to
“REMOTE specifications”
(page 22).
GPI
MAIN MENU
The underlined setting indicates...

20
MAIN MENU
INPUT SELECT
Item Setting Description
SDI1 *1OFF
ONFor setting whether the SDI 1 signals can
be selected when the channels are to be
switched using the INPUT button.
OFF:The SDI 1 signals cannot be selected.ON:The SDI 1 signals can be selected.
FORMATAUTO1080/60I
1080/50I
1080/30P
1080/25P
1080/24P
1080/24PsF1035/60I
720/60P
720/60P
ANAMO
576/50I
480/60I
For selecting the signals whose input is to
be accepted at the SDI 1 connector.
AUTO:
All supported signals are accepted.
1080/60I:...