Panasonic Monitor Bt Lh80w Owners Manual

11
VF Function
The unit can be connected to broadcasting and business cameras made by Panasonic and used as a VF 
(viewfinder).
BT-LH80WVF cable
(Option)
DC cable
(Option)
VF cable
(Option)
Part number:
BT-CS80GDC cable∗
1
(Option. 
Included with 
the BT-CS80G.) Camera platform ∗2 
(commercially available)
Camera side
DC OUT terminal
(1.5 A  output) Camera side
VF terminal
∗
1   Broadcasting and business camera-recorders compatible with a DC power supply (output current of 1.5 A)
    AJ-HDC27H...

DC14.0V YP
BPR  1080/60I
50%
P-P
43 5
12
6 7
[PHASE]              32
12
How to Use the On Screen Menu
Six types of information are displayed on the screen: the operating status display, picture adjusting knob status, 
sharpness display, function display, DC power supply voltage display, battery level display and menu display.
Operating status display
1. The selected input line (→ page 7, 2)
  • YPBPR, VF-YPBPR/VF-VIDEO, VIDEO, SDI
2. Signal format
  •  The display status can be set in “STATUS DISPLAY”...

SHARPNESS H   30
F1:MARKER
F2:WFM
F3:PIXEL TO PIXEL
XXXXX
DC14.0V 50%
MENUEXITSEL.ENTERENTER
[MAIN MENU]
MARKER
VIDEO CONFIG
SYSTEM CONFIG
VF CONFIG
FUNCTION
GPI
INPUT SELECT
CONTROL
HOURMETER
13
Sharpness display
• SHARPNESS H/V is displayed when it is set.
• The display disappears if remains idle for 2 minutes.
Displays the operation explanation for the menu 
button.
How to Use the On Screen Menu (continued)
Function display
•  You can set FUNCTION display in the menu.
•  When “FUNCTION DISPLAY” (→...

MENU12FUNCTION
3
INPUT ENTER
MENUEXITSEL.ENTERENTER
[MAIN MENU]
MARKER
VIDEO CONFIG
SYSTEM CONFIG
VF CONFIG
FUNCTION
GPI
INPUT SELECT
CONTROL
HOURMETER
MENUEXITSEL.ENTERSET
[MARKER]
MARKER
   16:9
   4:3
   BACK
   CENTER
GPI PRESET1
GPI PRESET2OFF
OFF
OFF
NORMALOFF
4:3
4:3
MENUEXITSEL.ENTERSET
[MARKER]
MARKER
   16:9
   4:3
   BACK
   MARKER
GPI PRESET1
GPI PRESET2ON
OFF
OFF
NORMALOFF
4:3
4:3
14
How to Use the On Screen Menu (continued)
Menu operations
1. Push [MENU] to display the MAIN menu.
2.  Push...

MENUEXITSEL.ENTERENTER
[SYSTEM CONFIG]
CONT./BACK.
BACKLIGHT
PEAKING/PHASE
STATUS DISPLAY
BATTERY REMAIN
SETUP LOAD
SETUP SAVE
PWR ON SETUP
BACKLIGHT--PEAKING
3SEC OFF
OFF
FA C TO RY
USER1
LAST
MENUEXITSEL.ENTERSET
[
SETUP SAVE]
USER1
YES
NO
MENUEXITSEL.ENTERENTER
[SYSTEM CONFIG]
CONT./BACK.
BACKLIGHT
PEAKING/PHASE
STATUS DISPLAY
BATTERY REMAIN
SETUP LOAD
SETUP SAVE
PWR ON SETUP
BACKLIGHT--PEAKING
3SEC OFF
OFF
FA C TO RY
USER1
LAST
MENUEXITSEL.ENTERSET
[
SETUP LOAD]
USER1
YES
NO
15
Changes to...

MAIN MENU
MARKER
VIDEO CONFIG
SYSTEM CONFIG
MARKER
16:9
4:3
BACK
CENTER
GPI PRESET1
GPI PRESET2
GPI CONTROL
GPI1
GPI2
GPI3
GPI4
GPI5
GPI6
GPI7
GPI8
USER  63
D93
D65
D56
VA R 1
VA R 2
VA R 3
[WHITE BALANCE VAR1]*
[WHITE BALANCE VAR2]*
[WHITE BALANCE VAR3]*
CONT./BACK.
BACKLIGHT
PEAKING/PHASE
STATUS DISPLAY
BATTERY REMAIN
SETUP LOAD
SETUP SAVE
PWR ON SETUP
*[WHITE BALANCE VAR1-3]
COLOR TEMP.
GAIN RED
GAIN GREEN
GAIN BLUE
BIAS RED
BIAS GREEN
BIAS BLUE
RESET
VF CONFIGVF CONTROL
CROSS HATCH
REAR TALLY
ZEBRA...

17
Main Menu (continued)
MARKERThe underlined values are factory preset setting values.
Sub menu Settings Explanation
MARKER
OFF∗1
ONUsed to make MARKER settings effective.
16:9∗
2∗3OFF
4:3
13:9
14:9
CNSCO
VISTA
95%
93%
90%
88%
80%Used to select/display the type of marker when the aspect ratio setting 
is 16:9.
       Marker not displayed.
     4:3 marker            13:9 marker
    14:9 marker        CNSCO marker
  VISTA marker          95% Area marker
    93% Area marker       90% Area marker
    88%...

18
Main Menu (continued)
Types of MARKER
 16:9 marker
   (Displayed when using HD, or when using SD 
with a 16:9 aspect ratio)
   The marker is only displayed as a vertical bar. In 
addition, the 
 section becomes the “MARKER 
BACK” item.
4:3 marker 13:9 marker
14:9 marker
VISTA marker, CNSCO marker
A horizontal dotted line is displayed as the marker.
VISTA marker CNSCO marker
Area marker
A dotted line is displayed as the marker.
95% Area  marker 93% Area  marker
90% Area  marker 88% Area  marker
80%...

19
VIDEO CONFIGThe underlined values are factory preset setting values.
Sub menu Settings Explanation
COLOR TEMP.
USER 63∗1
D93
D65
D56
VA R 1
VA R 2
VA R 3Used to select the color temperature.
  
Adjustable settings 0 - 63 
            (color temperature around 3000K - 9300K)
       Color temperature around 9300K
       Color temperature around 6500K
       Color temperature around 5600K
      WB adjustment mode∗
2
      WB adjustment mode∗2
      WB adjustment mode∗2
SHARPNESS
MODEHIGH∗3
LOWUsed to...

20
Main Menu (continued)
About IP Mode
By selecting “MODE1”, you can convert IP through Frame Interpolation.
This unit has reduced the Frame Interpolation delay to 1 field or less, compared to our old models having caused 
1 frame delay or more.
Factory preset setting value is “MODE1” recommended for normal use. Depending on images, in very rare 
cases, noise may occur on the screen. In such a case, “MODE 2” is recommended.
By selecting “MODE2”, you can convert IP through Field Interpolation.
Since MODE2...