Panasonic Monitor Bt H1700bp Owners Manual

11
BASIC MENU OPERATIONS
(MAIN MENU, SET-UP MENU)

ABOUT MENU SCREENS
This monitor features a MAIN MENU (main menu screen) and a SET-UP MENU (setup menu screen).
The MAIN MENU contains the functions normally used, and the SET-UP MENU contains the settings required for initial setup.
“MAIN MENU”
Items Functions Displays
1 APERTURE CONTROL Compensates the frequency characteristics of the input video signal. *1
2 SLOT CONDITION Displays the status of the input cards installed in each of the input card...

12
7About “ sub menu”
Only displays selected items. (sub-menu display) Allows
you to adjust and set items while looking at the actual
screen.
NOTE:
This function is available only when “
 sub menu” is displayed in the
MENU.
Example: Setting an item in the “PICTURE SUB ADJ.”
with the sub-menu.
1. Press the  button while  button is pressed.
“SET-UP MENU” is displayed on the screen.
2. Select “PICTURE SUB ADJ.” by pressing the 
button, then press the  button.
3. Select “
 sub menu” by pressing the  button...

13

APERTURE CONTROL
SLOT CONDITION
sub menu POSI. :LOWER
AREA MARKER.
COLOR MATRIX
EXIT:   
 
 
 
 
 
 
 
 
 
 
 
 
 
 
MENUENTER: + SELECT:

LEVEL : 00
CONTROL FREQ. :HIGH
sub menu
reset
EXIT:   
 
 
 
 
 
 
 
 
 
 
 
 
 
 
MENUADJUST:–+  SELECT:

INPUT A : VIDEO-1
INPUT B : VIDEO-2
INPUT C : COMPO.
INPUT D : RGB
INPUT E : NO SLOT
INPUT F : NO SLOT
EXIT:   
 
 
 
 
 
 
 
 
 
 
 
 
 
 
MENU

MARKER SELECT :LINE
ZOOM :ON
ASPECT SELECT  : 4:3
SAFETY MARKER : 80
R-MARKER SELECT :LINE
R-ZOOM      :OFF...

14
AREA MARKER:
Controls ON/OFF and other settings of the MARKER
SELECT, SAFETY MARKER, and ZOOM functions
included in the AREA MARKER function.
Press the 
 button to display
the setting menu illustrated
on the right.
NOTES:
• For the 4:3 screen ratio, only
SAFETY MARKER and R-
SAFETY MARKER are displayed.
• To set up non-“R-” items, press the
AREA MARKER button on the front panel. An external control
system should not be operated at this time.
• To set up “R-” items, set the AREA MARKER function to ON...

15
7 SAFETY MARKER/R-SAFETY MARKER
Displays dotted lines to indicate the areas
corresponding to 80%, 88%, or 90% of the screen size
(the aspect ratio setting in “ASPECT SELECT/R-
ASPECT SELECT”).
OFF :SAFETY MARKER does not function.
90% :Marked area is 90% of the 16:9 screen ratio.
88% :Marked area is 88% of the 16:9 screen ratio.
80% :Marked area is 80% of the 16:9 screen ratio.
NOTES:
• When a picture of 4:3 aspect ratio is input, SAFETY MARKER for
4:3 screen is displayed.
• To display SAFETY MARKER...

16
HOW TO USE “SET-UP MENU”
7“SET-UP MENU” SCREENS
Setting Items
Adjusts with 
and  buttons.

 See page 12 for
more information on
“
 sub menu” and
“reset”.
Press .

 See page 20. SET-UP MENU
* To go back the previous MENU,
press MENU.

FUNCTION SETTING
PICTURE SUB ADJ.
COLOR TEMP./BAL. 
SIZE/POSI. ADJ.
DISTORTION ADJ.
STATUS DISPLAY
CONTROL LOCK : OFF
 all reset
EXIT:   
 
 
 
 
 
 
 
 
 
 
 
 
 
 
MENUENTER: + SELECT:

STATUS DISPLAY    : ON
EXIT:   
 
 
 
 
 
 
 
 
 
 
 
 
 
 
MENUADJUST: – + SELECT:...

17
FUNCTION SETTING
Selects the control systems for the COLOR SYSTEM,
synchronized signal, RUSH DELAY TIME, tally lamp
colors, and MAKE/TRIGGER terminal.
• Checks the amount of time that the monitor has been used.
• Selects the audio channel group for the EMBEDDED
AUDIO. (When an input card compliant with EMBEDDED
AUDIO is installed.)
Press the  button to
display the setting menu
illustrated on the right.
7COLOR SYSTEM
Selects the color system when using the video input
card.
AUTO :Changes NTSC and PAL...

18
HOW TO USE “SET-UP MENU” (cont’d)
COLOR TEMP./BAL.
Sets or adjusts the color temperature or white
balance.
Press the 
 button to
display the setting menu
illustrated on the right.
•Use the five items indicated with mark to make fine adjustments
between the monitors.
7COLOR TEMP.
Selects the color temperature.
HIGH :Sets the color temperature to 9300.
LOW :Sets the color temperature to 6500.
7BLUE DRIVE
Adjusts the blue drive level.
• MIN ~ 000 ~ MAX (in 127 grades)
7RED DRIVE
Adjusts the red drive...

19
DISTORTION ADJ.
Compensates the picture distortion.
Press the 
 button to
display the setting menu
illustrated on the right.
7 PINCUSHION
Compensates pincushion picture distortion.
• –20 ~ 00 ~ +20
– :Expands both left and right sides of the picture.
+:Squeezes both left and right sides of the picture.
7 PIN.BALANCE
Adjusts the compensation balance of the pincushion
picture distortion.
• –20 ~ 00 ~ +20
– :The picture is expanded on the left side, and squeezed on the
right side.
+ :The picture is...

20
CONTROL LOCK
7CONTROL LOCK
Invalidates most of operations on the front panel
(including menu screen operations).
OFF :Enables normal operations.
ON :Invalidates all operations except the power switch and
CONTROL LOCK.
NOTE:
While CONTROL LOCK is set to ON, only the following operations
are available:
–turning the monitor’s power ON or OFF.
–displaying the SET-UP MENU to set CONTROL LOCK to OFF.
Attempting to perform any other operation causes the “
 Control
lock on!” warning to appear on the screen...