Panasonic Monitor Bt H1700bp Owners Manual
Have a look at the manual Panasonic Monitor Bt H1700bp Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
11 BASIC MENU OPERATIONS (MAIN MENU, SET-UP MENU) ABOUT MENU SCREENS This monitor features a MAIN MENU (main menu screen) and a SET-UP MENU (setup menu screen). The MAIN MENU contains the functions normally used, and the SET-UP MENU contains the settings required for initial setup. “MAIN MENU” Items Functions Displays 1 APERTURE CONTROL Compensates the frequency characteristics of the input video signal. *1 2 SLOT CONDITION Displays the status of the input cards installed in each of the input card slots. 3 sub menu POSI. Selects the display position of the sub menu superimposed on the screen. 4 AREA MARKER Controls ON/OFF and other settings of the MARKER SELECT, SAFETY MARKER, and ZOOM functions included in the AREA MARKER function.*2 5 COLOR MATRIX Selects or adjusts the picture color matrix. *1 About “Displays” *1 : Not displayed when an RGB signal is input. *2 : Displayed only when the screen ratio is 16:9. Not displayed when an RGB signal is input. When some items are not displayed depending on the input signals, subsequent items will move up. Position of the menu varies depending on the type of signal. “SET-UP MENU” Items Functions 1 FUNCTION SETTING Selects the control systems for the COLOR SYSTEM, synchronized signal, RUSH DELAY TIME, tally lamp colors, and MAKE/TRIGGER terminal. * Checks the amount of time that the monitor has been used. * Selects the audio channel group for the EMBEDDED AUDIO. (When an input card compliant with EMBEDDED AUDIO is installed.) 2 PICTURE SUB ADJ. Controls the approximate adjustment of the video control level when the video adjustment knob is adjusted to the center. * Can also be used to switch the NTSC set-up level, and change the component signal’s input level settings. 3 COLOR TEMP./BAL. Sets or adjusts the color temperature or white balance. 4 SIZE/POSI. ADJ. Adjusts the size or position of the picture. 5 DISTORTION ADJ. Compensates the picture distortion. 6 STATUS DISPLAY Sets the status display ON/OFF. * Switches the display on and off. Also selects the type of display. 7 CONTROL LOCK Sets the control lock preventing the monitor from misuse. 8 all reset Sets all items in SET-UP MENU to factory-preset values. BUTTONS FOR MENU OPERATIONS VOLUMESLOT 1A B DEGAUSS MENU MUTING SCREENS CHECKASPECT AREA MARKER UNDER SCANPULSE CROSSCOLOR OFFSLOT 2C DSLOT 3POWERE FINPUT SELECT VOLUMEDEGAUSS MENU MUTING MENU LCT1464-001A_EN_10-15-603.9.19, 14:45 11
12 7About “ sub menu” Only displays selected items. (sub-menu display) Allows you to adjust and set items while looking at the actual screen. NOTE: This function is available only when “ sub menu” is displayed in the MENU. Example: Setting an item in the “PICTURE SUB ADJ.” with the sub-menu. 1. Press the button while button is pressed. “SET-UP MENU” is displayed on the screen. 2. Select “PICTURE SUB ADJ.” by pressing the button, then press the button. 3. Select “ sub menu” by pressing the button several times, then press the button. The adjustment bar is displayed at the bottom or top of the screen. 4. Select the desired setup item by pressing the and buttons (several times). 5. Press the and/or buttons as many times as required to obtain the desired setting. ¶To delete the sub-menu display: Press the MENU button on the front panel. •The previous MENU display is restored. ¶To change the position of the sub-menu display 1. Display the “MAIN MENU” by pressing the MENU button. 2. Select “sub menu POSI.” by pressing the button several times. 3.Set “UPPER” or “LOWER” by pressing the and buttons. 7About “reset” Restores all MENU settings (currently displayed) to factory-preset values. Select “reset” using the / buttons, then press the button. NOTE: This function is only available when “reset” is displayed in the MENU. BASIC MENU OPERATIONS (MAIN MENU, SET-UP MENU) (cont’d) 7DISPLAYING THE MENU SCREENS ¶To display MAIN MENU Press the MENU button on the front panel. ¶To display SET-UP MENU Press the button while pressing the button on the front panel. NOTES: •To exit the MENU, press the MENU button several times. •The MENU automatically exits about 30 seconds after the last Menu operation. •To go back the previous MENU, press MENU. 7MENU OPERATION PROCEDURE Example: Adjusting the “BRIGHT” value to “+10”. 1. Press the button while button is pressed. “SET-UP MENU” is displayed on the screen. 2. Select “PICTURE SUB ADJ.” by pressing the button, then press the button. “PICTURE SUB ADJ.” menu is displayed on the screen. 3. Select “BRIGHT” by pressing the button . 4. Press the and/or buttons as many times as required to obtain the brightness desired. Example: Setting brightness to “+10”. 5. Delete the “SET-UP MENU” by pressing the MENU button several times. FUNCTION SETTING PICTURE SUB ADJ. COLOR TEMP./BAL. SIZE/POSI. ADJ. DISTORTION ADJ. STATUS DISPLAY CONTROL LOCK : OFF all reset EXIT: MENUENTER: + SELECT: CONTRAST : 00 BRIGHT :+10 CHROMA : 00 PHASE : 00 NTSC SETUP : 00 COMPO.LEVEL :SMPTE sub menu reset EXIT: MENUADJUST: – + SELECT: CONTRAST : 00 BRIGHT : 00 CHROMA : 00 PHASE : 00 NTSC SETUP : 00 COMPO.LEVEL :SMPTE sub menu reset EXIT: MENUADJUST:–+ SELECT: CONTRAST : 00 ––++[UPPER] [LOWER] CONTRAST : 00 ––++ LCT1464-001A_EN_10-15-603.9.19, 14:45 12
13 APERTURE CONTROL SLOT CONDITION sub menu POSI. :LOWER AREA MARKER. COLOR MATRIX EXIT: MENUENTER: + SELECT: LEVEL : 00 CONTROL FREQ. :HIGH sub menu reset EXIT: MENUADJUST:–+ SELECT: INPUT A : VIDEO-1 INPUT B : VIDEO-2 INPUT C : COMPO. INPUT D : RGB INPUT E : NO SLOT INPUT F : NO SLOT EXIT: MENU MARKER SELECT :LINE ZOOM :ON ASPECT SELECT : 4:3 SAFETY MARKER : 80 R-MARKER SELECT :LINE R-ZOOM :OFF R-ASPECT SELECT : 13:9 R-SAFETY MARKER : 80 EXIT: MENUADJUST:–+ SELECT: SELECT : MANUAL R–Y PHASE : 90 R/B GAIN : 0.86 G–Y PHASE : 244 G/B GAIN : 0.30 sub menu reset EXIT: MENUADJUST:–+ SELECT: Some items are not displayed depending on the picture input signal. ( See page 11.) Adjusts with and buttons. See page 12 for more information on “ sub menu” and “reset”. Press . See page 14. HOW TO USE “MAIN MENU” 7“MAIN MENU” SCREENS MAIN MENU Setting Items * To go back the previous MENU, press MENU. LCT1464-001A_EN_10-15-603.9.19, 14:45 13
14 AREA MARKER: Controls ON/OFF and other settings of the MARKER SELECT, SAFETY MARKER, and ZOOM functions included in the AREA MARKER function. Press the button to display the setting menu illustrated on the right. NOTES: • For the 4:3 screen ratio, only SAFETY MARKER and R- SAFETY MARKER are displayed. • To set up non-“R-” items, press the AREA MARKER button on the front panel. An external control system should not be operated at this time. • To set up “R-” items, set the AREA MARKER function to ON via external control. • Use the MAKE/TRIGGER terminal for external control of AREA MARKER function. Please note that this will only work when the AREA MARKER button on the front panel has been pressed (the AREA MARKER lamp will be illuminated). For details, refer to “HOW TO USE THE MAKE/TRIGGER TERMINAL” on page 21. 7MARKER SELECT/R-MARKER SELECT It displays the area of the aspect ratio that has been set in the ASPECT SELECT/R-ASPECT SELECT, superimposed on the current screen. OFF :MARKER SELECT does not function. LINE :Displays the area with an outline. HALF :The area outside the specified screen ratio is displayed as a 50% transparency. HALF+L :The area of the specified screen ratio is indicated by an outline, and the area outside of that is displayed as a 50% transparency. BLK. :The area outside the specified screen ratio is black. Only the portion of the picture within the designated area is displayed. BLK.+L :The area of the specified screen ratio is indicated by an outline, and the area outside of that becomes black so that only the area inside the line is displayed. 7ZOOM/R-ZOOM Zooms the center of the marked area. OFF : Does not zoom. ON : Zooms. NOTES: • Does not function when under-scan is operated. • To adjust the zoom picture size, refer to “ZOOM H. SIZE” and “ZOOM V. SIZE” on page 19. 7 ASPECT SELECT/R-ASPECT SELECT Selects the screen aspect ratio. • 4:3/13:9/14:9 HOW TO USE “MAIN MENU” (cont’d) 7ITEM CONTENTS AND ADJUSTMENT RANGE/SETTINGS 4:3 14:9 13:9 LEVEL : 00 CONTROL FREQ. :HIGH sub menu reset EXIT: MENUADJUST:–+ SELECT: INPUT A : VIDEO-1 INPUT B : VIDEO-2 INPUT C : COMPO. INPUT D : RGB INPUT E : NO SLOT INPUT F : NO SLOT EXIT: MENU MARKER SELECT :LINE ZOOM :ON ASPECT SELECT : 4:3 SAFETY MARKER : 80 R-MARKER SELECT :LINE R-ZOOM :OFF R-ASPECT SELECT : 13:9 R-SAFETY MARKER : 80 EXIT: MENUADJUST:–+ SELECT: APERTURE CONTROL Compensates the frequency characteristics of the input video signal. Press the button to display the setting menu illustrated on the right. 7 LEVEL Adjusts the compensate value. The higher the number is, the larger the compensate value gets. •00 ~ 10 7 CONTROL FREQ. Adjusts the frequency compensation. HIGH:Compensates the high frequencies. LOW :Compensates the low frequencies. OFF :Deactivates the aperture compensation. SLOT CONDITION Displays the status of the input cards installed in each of the input card slots. Press the button to display the setting menu illustrated on the right. INPUT A/INPUT B : Status of SLOT1 INPUT C/INPUT D : Status of SLOT2 INPUT E/INPUT F : Status of SLOT3 VIDEO-1/VIDEO-2 :With VIDEO input card is installed. COMPO./RGB :With Component/RGB input card is installed. SDI-1/SDI-2 :With SDI input card is installed. HDSDI-1/HDSDI-2 :With HD SDI input card is installed. NOTES: • If an input card is compatible with EMBEDDED AUDIO, an asterisk (*) is displayed its name. (Example: HDSDI-1*) • The “--” indication may appear. This means that no signal is input to the corresponding INPUT, either because no input card is installed or because the input card only has a single input line. sub menu POSI. Selects the display position of the sub menu superimposed on the screen. For details, refer to “To change the position of the sub-menu display” on page 12. LCT1464-001A_EN_10-15-603.9.19, 14:45 14
15 7 SAFETY MARKER/R-SAFETY MARKER Displays dotted lines to indicate the areas corresponding to 80%, 88%, or 90% of the screen size (the aspect ratio setting in “ASPECT SELECT/R- ASPECT SELECT”). OFF :SAFETY MARKER does not function. 90% :Marked area is 90% of the 16:9 screen ratio. 88% :Marked area is 88% of the 16:9 screen ratio. 80% :Marked area is 80% of the 16:9 screen ratio. NOTES: • When a picture of 4:3 aspect ratio is input, SAFETY MARKER for 4:3 screen is displayed. • To display SAFETY MARKER for 16:9 screen ratio when a picture of 16:9 aspect ratio is input, set “MARKER SELECT/R-MARKER SELECT” to OFF. (In this case, setting of ASPECT SELECT is invalid.) COLOR MATRIX Selects or adjusts the standard of the color demodulation (color rendering). Press the button to display the setting menu illustrated on the right. •The standard setting is set to “ITU601” or “ITU709” depending on the input signal format. The factory preset of MANUAL is ITU709. Input Signal Format Standard Manual setting setting (MANUAL) NTSC, PAL, 480/60i, ITU601 480/60p, 576/50i, 575/50p ITU709 720/50p, 720/60p, 1080/50i, ITU709 1080/60i, 1035/60i, 1080/24psF The menu screen when MANUAL is selected. R-Y PHASE 90 ITU601R/B GAIN 0.79G-Y PHASE 244 G/B GAIN 0.45 R-Y PHASE 90 ITU709R/B GAIN 0.86G-Y PHASE 244 G/B GAIN 0.30 7SELECT Selects the picture matrix standard. ITU601 or ITU709 :Standard setting MANUAL :Manual setting NOTE: The following items are displayed when MANUAL is selected. When ITU601 or ITU709 is selected, they are not displayed. 7R-Y PHASE Sets the R-Y phase. •90/92/94/112 7R/B GAIN Sets the R/B gain. •0.86/0.56/0.68/0.79 7G-Y PHASE Sets the G-Y phase. •244/253/236/240 7G/B GAIN Sets the G/B gain. •0.30/0.34/0.40/0.45 SELECT : MANUAL R–Y PHASE : 90 R/B GAIN : 0.86 G–Y PHASE : 244 G/B GAIN : 0.30 sub menu reset EXIT: MENUADJUST:–+ SELECT: LCT1464-001A_EN_10-15-603.9.19, 14:45 15
16 HOW TO USE “SET-UP MENU” 7“SET-UP MENU” SCREENS Setting Items Adjusts with and buttons. See page 12 for more information on “ sub menu” and “reset”. Press . See page 20. SET-UP MENU * To go back the previous MENU, press MENU. FUNCTION SETTING PICTURE SUB ADJ. COLOR TEMP./BAL. SIZE/POSI. ADJ. DISTORTION ADJ. STATUS DISPLAY CONTROL LOCK : OFF all reset EXIT: MENUENTER: + SELECT: STATUS DISPLAY : ON EXIT: MENUADJUST: – + SELECT: H.SIZE : 00 H.POSITION : 00 V.SIZE : 00 V.POSITION : 00 ZOOM H.SIZE : 00 ZOOM V.SIZE : 00 sub menu reset EXIT: MENUADJUST: – + SELECT: COLOR SYSTEM : AUTO SYNC SELECT : INT. RUSH DELAY TIME : STD. TALLY SELECT : GREEN REMOTE SYSTEM : MAKE E.AUDIO GROUP : 1G HOUR METER X100h : 000 EXIT: MENUADJUST: – + SELECT: CONTRAST : 00 BRIGHT : 00 CHROMA : 00 PHASE : 00 NTSC SETUP : 00 COMPO.LEVEL :SMPTE sub menu reset EXIT: MENUADJUST: – + SELECT: PINCUSHION : 00 PIN.BALANCE : 00 PARALLELOGRAM : 00 TRAPEZOID : 00 ROTATION : 00 sub menu reset EXIT: MENUADJUST: – + SELECT: COLOR TEMP. : LOW BLUE DRIVE : 000 RED DRIVE : 000 GREEN CUTOFF : MIN BLUE CUTOFF : MIN RED CUTOFF : MIN sub menu reset EXIT: MENUADJUST: – + SELECT: LCT1464-001A_EN_16-21-B03.9.19, 14:46 16
17 FUNCTION SETTING Selects the control systems for the COLOR SYSTEM, synchronized signal, RUSH DELAY TIME, tally lamp colors, and MAKE/TRIGGER terminal. • Checks the amount of time that the monitor has been used. • Selects the audio channel group for the EMBEDDED AUDIO. (When an input card compliant with EMBEDDED AUDIO is installed.) Press the button to display the setting menu illustrated on the right. 7COLOR SYSTEM Selects the color system when using the video input card. AUTO :Changes NTSC and PAL automatically. NTSC :Keeps the color system NTSC. PA L :Keeps the color system PAL. NOTE: Normally select AUTO. However, if the input signal is unstable, select NTSC or PAL. 7SYNC SELECT Synchronized signal selection. INT. :The input video signal is synchronized with the built- in sync signal. EXT. :The input video signal is synchronized with an external signal from an external sync terminal. 7RUSH DELAY TIME Sets the time when the power supply to the monitor’s circuits (excluding the micro computers) starts after the power switch is pressed. STD. :The power supply starts approx. 1 second after the power switch is pressed. SLOW :The power supply starts approx. 3.2 seconds after the power switch is pressed. NOTE: If you are going to turn several Multi-Format Monitors on at the same time, it is recommended to apply SLOW to some of the monitors to control rush current. 7TALLY SELECT Selects the color of the tally lamp (when lit) on the upper front panel. GREEN :The tally lamp lights in green. RED :The tally lamp lights in red. 7REMOTE SYSTEM Selects the control system for the MAKE/TRIGGER terminals. Refer to “HOW TO USE THE MAKE/ TRIGGER TERMINAL” on page 21. • MAKE (make contact)/TRIGGER (trigger contact) 7E.AUDIO GROUP Selects the audio channel group for EMBEDDED AUDIO. It is displayed when an input card compliant with EMBEDDED AUDIO is installed. • 1G/2G/1-2G 1G : 2G : 1-2G : NOTE: The auto setting mixes and outputs all 8 signal channels. Sets the output level automatically by detecting the number of channels receiving the signal. * About sound output level Sound output level is set to a standard output level for all channels when several sound channels are output at the same time. The more channels are selected, the lower each channel’s level will be. (Each channel’s level becomes half for 1– 2 channel, 1/4 for 1– 4 channel.) 7HOUR METER X100h Displays the total usage time of the monitor in hundred- hour units. • 000 ~ 655 NOTES: • When the timer passes 655, it returns to 000. • The timer does not count the usage time under one hour. 5ch 6ch 7ch 8ch 5-6ch 7-8ch 5-8ch AUTO 5-8ch 1-4ch 7-8ch 5-6ch 3-4ch 1ch 2ch 3ch 4ch 5ch 6ch 7ch 8ch 1-2ch 7ITEM CONTENTS AND ADJUSTMENT RANGE/SETTINGS 1ch 2ch 3ch 4ch 1-2ch 3-4ch 1-4ch COLOR SYSTEM : AUTO SYNC SELECT : INT. RUSH DELAY TIME : STD. TALLY SELECT : GREEN REMOTE SYSTEM : MAKE E.AUDIO GROUP : 1G HOUR METER X100h : 000 EXIT: MENUADJUST:–+ SELECT: LCT1464-001A_EN_16-21-B03.9.19, 14:46 17
18 HOW TO USE “SET-UP MENU” (cont’d) COLOR TEMP./BAL. Sets or adjusts the color temperature or white balance. Press the button to display the setting menu illustrated on the right. •Use the five items indicated with mark to make fine adjustments between the monitors. 7COLOR TEMP. Selects the color temperature. HIGH :Sets the color temperature to 9300. LOW :Sets the color temperature to 6500. 7BLUE DRIVE Adjusts the blue drive level. • MIN ~ 000 ~ MAX (in 127 grades) 7RED DRIVE Adjusts the red drive level. • MIN ~ 000 ~ MAX (in 127 grades) 7GREEN CUTOFF Sets the green cut-off point. • MIN ~ MAX (in 205 grades) 7BLUE CUTOFF Sets the blue cut-off point. • MIN ~ MAX (in 205 grades) 7RED CUTOFF Sets the red cut-off point. • MIN ~ MAX (in 205 grades) PICTURE SUB ADJ. Controls the approximate adjustment of the video control level when the video adjustment knob is adjusted to the center. • Can also be used to switch the NTSC set-up level, and change the component signal’s input level settings. Press the button to display the setting menu illustrated on the right. NOTE: When the RGB signal is input, only CONTRAST and BRIGHT are displayed. When the PAL signal is input, only CONTRAST, BRIGHT and CHROMA are displayed. 7CONTRAST • –20 ~ 00 ~ +20 7BRIGHT • –20 ~ 00 ~ +20 7CHROMA • –20 ~ 00 ~ +20 7PHASE • –20 ~ 00 ~ +20 7NTSC SETUP Sets the set-up level of the input NTSC signal. 00 :Compliant with 0% set-up signal. 7.5 :Compliant with 7.5% set-up signal. NOTE: NTSC SETUP is displayed only when the video input card is installed and an NTSC signal is input. 7COMPO. LEVEL Sets the set-up level of the input component signal. SMPTE :Compliant with M2VTR signals. B75 :Compliant with Betacam 7.5% set-up signal. B00 :Compliant with Betacam 0% set-up signal. NOTE: COMPO. LEVEL is displayed only when a 480/60i, 480/60p, 576/ 50i or 576/50p signal is input. CONTRAST : 00 BRIGHT : 00 CHROMA : 00 PHASE : 00 NTSC SETUP : 00 COMPO.LEVEL :SMPTE sub menu reset EXIT: MENUADJUST:–+ SELECT: COLOR TEMP. : LOW BLUE DRIVE : 000 RED DRIVE : 000 GREEN CUTOFF : MIN BLUE CUTOFF : MIN RED CUTOFF : MIN sub menu reset EXIT: MENUADJUST:–+ SELECT: LCT1464-001A_EN_16-21-B03.9.19, 14:46 18
19 DISTORTION ADJ. Compensates the picture distortion. Press the button to display the setting menu illustrated on the right. 7 PINCUSHION Compensates pincushion picture distortion. • –20 ~ 00 ~ +20 – :Expands both left and right sides of the picture. +:Squeezes both left and right sides of the picture. 7 PIN.BALANCE Adjusts the compensation balance of the pincushion picture distortion. • –20 ~ 00 ~ +20 – :The picture is expanded on the left side, and squeezed on the right side. + :The picture is squeezed on the left side, and expanded on the right side. 7 PARALLELOGRAM Compensates parallelogram picture distortion. • –20 ~ 00 ~ +20 – :Moves the upper side of the picture to the right, and the lower side to the left. + :Moves the upper side of the picture to the left, and the lower side to the right. 7 TRAPEZOID Compensates trapezoid picture distortion. • –20 ~ 00 ~ +20 –:Enlarges the upper side of the picture. +:Reduces the upper side of the picture. 7 ROTATION Compensates for picture tilt. • –31 ~ 00 ~ +31 –:Turns the picture clockwise. + :Turns the picture counterclockwise. SIZE/POSI. ADJ. Adjusts the size or position of the picture. Press the button to display the setting menu illustrated on the right. 7 H.SIZE Adjusts the horizontal screen size. • –20 ~ 00 ~ +20 (*) –:Reduces the screen size horizontally. +:Enlarges the screen size horizontally. * Reduced to 00 ~ +20 during the under-scan mode. 7 H.POSITION Adjusts the horizontal screen position. • –20 ~ 00 ~ +20 –:Move the screen to the left. +:Move the screen to the right. 7 V.SIZE Adjusts the vertical screen size. • –20 ~ 00 ~ +20 –:Reduces the screen size vertically. +:Enlarges the screen size vertically. 7 V.POSITION Adjusts the vertical screen position. • – 20 ~ 00 ~ + 20 –:Move the screen up. +:Move the screen down. 7ZOOM H. SIZE • – 20 ~ 00 7ZOOM V. SIZE • –20 ~ 00 ~ +20 NOTE: ZOOM H. SIZE and ZOOM V. SIZE are displayed only when the ZOOM function is operated. ZOOM H. SIZE adjusts the screen size horizontally, and ZOOM V. SIZE adjusts it vertically when the ZOOM is operated. H.SIZE : 00 H.POSITION : 00 V.SIZE : 00 V.POSITION : 00 ZOOM H.SIZE : 00 ZOOM V.SIZE : 00 sub menu reset EXIT: MENUADJUST: – + SELECT: PINCUSHION : 00 PIN.BALANCE : 00 PARALLELOGRAM : 00 TRAPEZOID : 00 ROTATION : 00 sub menu reset EXIT: MENUADJUST:–+ SELECT: LCT1464-001A_EN_16-2103.10.10, 13:26 19
20 CONTROL LOCK 7CONTROL LOCK Invalidates most of operations on the front panel (including menu screen operations). OFF :Enables normal operations. ON :Invalidates all operations except the power switch and CONTROL LOCK. NOTE: While CONTROL LOCK is set to ON, only the following operations are available: –turning the monitor’s power ON or OFF. –displaying the SET-UP MENU to set CONTROL LOCK to OFF. Attempting to perform any other operation causes the “ Control lock on!” warning to appear on the screen for approx. 3 seconds. all reset Resets all SET-UP MENU items to factory-preset values. 1.Select “all reset” by / buttons, then press button. Confirmation message is displayed. 2.To initialize, press button. To cancel the initialization, press the MENU button. STATUS DISPLAY Sets the status display ON/OFF. * Switches the display on and off. Also selects the type of display. Press the button to display the setting menu illustrated on the right. 7STATUS DISPLAY Sets the status display ON or OFF. ON :The information is displayed. OFF :The information is not displayed. HOW TO USE “SET-UP MENU” (cont’d) STATUS DISPLAY : ON EXIT: MENUADJUST:–+ SELECT: LCT1464-001A_EN_16-21-B03.9.19, 14:46 20