Panasonic Monitor Bt H1700 Owners Manual

ENGLISH
1. APERTURE CONTROL
Compensates the frequency
characteristics of the input
video signal. Press the 
button to display the setting
menu illustrated on the right.
NOTE :APERTURE
CONTROL is not
displayed when the
RGB signal is input.
●INPUT A/B corresponds to SLOT 1, INPUT C/D to SLOT 2,
and INPUT E/F to SLOT 3.
●VIDEO-1 or VIDEO-2 shows the video input card is installed.
COMPO. or RGB shows the component/RGB input card.
SDI 1 or SDI 2 shows the SDI input card is installed.
HD SDI 1 or HD SDI 2...

Input Signal Format Standard Manual
setting setting
(MANUAL)
NTSC, PAL, 480/60i,
ITU601
480/60p, 576/50i, 575/50p
ITU709
720/60p, 1080/50i, 1080/60i,
ITU709
1035/60i, 1080/24psF
    
SELECT :MANUAL
R-Y PHASE :90
R/B GAIN  :0.86
G-Y PHASE :244
G/B GAIN  :0.30
 sub menu
 reset
EXIT: 
MENU ADJUST:- + SELECT:
5. AREA MARKER-R
Items : Selects the size marker for the other screen ratio
(aspect) used when the screen ratio is 16:9. (for
external control)
Settings : OFF/16:9/4:3/13:9/14:9/MODE 1/MODE 2
Functions...

ENGLISH
HOW TO USE “SETUP MENU”
“SETUP MENU” ITEMS
Items Functions
1 FUNCTION SETTING Displays the monitor’s power-up time or the total usage time.
2 PICTURE SUB ADJ. Performs approximate adjustments using the control knobs on the front panel.
3 COLOR TEMP./BAL. Sets or adjusts the colour temperature or white balance.
4 SIZE/POSI. ADJ. Adjusts the size or position of the picture.
5 DISTORTION ADJ. Compensates the picture distortion.
6 STATUS DISPLAY Makes the status of the input signal appear or...

HOW TO USE “SETUP MENU” (contd)
    
COLOR SYSTEM       :AUTO
RUSH DELAY TIME    :STD.
HOUR METER X100h   :000 
EXIT: 
MENU ADJUST:- + SELECT:
    
CONTRAST         :00
BRIGHT           :00
CHROMA           :00 
PHASE            :00
NTSC SETUP       :00
COMPO.LEVEL      :SMPTE
 sub menu 
 reset
EXIT: 
MENU ADJUST:- + SELECT:
ITEM CONTENTS AND ADJUSTMENT RANGE/SETTINGS
1. FUNCTION SETTING
Selects the colour system and
displays the monitor’s power-
up time or the total usage time.
Press the 
 button to...

ENGLISH
    
COLOR TEMP.      :LOW
BLUE DRIVE       :000
RED DRIVE        :000 
GREEN CUTOFF     :000
BLUE CUTOFF      :000
RED CUTOFF       :000
 sub menu
 reset
EXIT: 
MENU ADJUST:- + SELECT:
    
H.SIZE           :00
H.POSITION       :00
V.SIZE           :00 
V.POSITION       :00
 sub menu
 reset
EXIT: 
MENU ADJUST:- + SELECT:
81sCOLORsTEMP12BAL1
Sets or adjusts the colour
temperature or white balance.
Press the 
 button to display
the setting menu illustrated on
the right.
Item : COLOR TEMP.
Settings...

    
STATUS DISPLAY   :ON
1080/1035        :1080
 
EXIT: 
MENU ADJUST:- + SELECT:
    
PINCUSHION       :00
PIN.BALANCE      :00
PARALLELOGRAM    :00 
TRAPEZOID        :00
 sub menu
 reset
EXIT: 
MENU ADJUST:- + SELECT:
5. DISTORTION ADJ.
Compensates the picture
distortion. Press the 
 button
to display the setting menu
illustrated on the right.
Item : PINCUSHION
Adjustment
 range :–20 ~ 00 ~ +20
Function : Compensates pincushion picture distortion.
– : Expands both left and right sides of the
picture.
+...

ENGLISH
HOW TO USE EXTERNAL
CONTROL
ABOUT EXTERNAL CONTROL
This multi-format monitor has two external control terminals. One is the MAKE terminal, which controls the monitor by connecting
the terminals with many functions to the ground (GND) terminal. The other is the RS-232C terminal, which allows the monitor to
be controlled by a PC via serial communication.
Control priority is in the following order; the MAKE terminal > the RS-232C terminal > the buttons on the front panel.
10 9 8
5432176
14 15 13 12...

HOW TO USE EXTERNAL
CONTROL 
(cont.)
HOW TO USE THE RS-232C TERMINAL
You can control the monitor from your PC via the RS-232C terminal.
For details on operating the monitor from the PC, consult your dealer or service centre for details.
1. Cable
Prepare a straight cable with a D-sub connector (9-pin, female) and a D-sub
connector (9-pin, male)
2. Communications Specifications
Baud Rate : 4800/9600/19200 (factory pre-set; 4800)
Data Bits : 8 bits
Parity : No parity
Stop Bits : 1
Flow Control : Hardware...

ENGLISH
Problems
No power supply
No picture with
the power on
No sound
Wrong colour
Unnatural picture
Shaking picturePoints to be checked
Is the power plug loosened or
disconnected?
Is the signal cable disconnected?
Is the power of the connected
component ON?
Is the signal output from the connected
component?
Is the input signal selected correctly?
Is the input signal adapted to the
monitor’s specification?
Is the audio cable disconnected?
Is the audio signal output from the
connected component?
Is the...

Problems
Irregular colour
Wrong picture
position, wrong
picture size
Front panel
buttons and
knobs do not
functionPoints to be checked
Is the monitor placed or moved close to
a speaker or any other device
incorporating a magnet?
Has the position of the monitor been
changed with the power on?
Has the picture position, size or
distortion been changed?
Have the UNDER SCAN or ASPECT
button been pressed?
Has the CONTROL LOCK function
been set to ON?
Has the monitor’s setting been
changed to enable control...