Panasonic Microwave Ovens Ne 1024_ne 1054 Operating Instructions

How to Operate
Display Window
/Pffil .
iq Il-l
trq
f-n.-l
t ll
1.
E_ry
.When lhe oven shifts to the next staae. (
a singte beep tone *itt :;r;;:^r stase 
[_lg
I .tr. I
.rlm) 
louwj
C. Programmed Heating:
Example: 1 stage; Memory Pad g to heat for 3 minutes at HIGH power
,@
.Press the Memory Pad 9.In Program Lock Mode oven willstart without pressing STARTPad. See page 15.
.Press the START Pad.Heating will start.The time in the Display Window willcount down.
.All heating will stop.When opening the door,...

Itirn I
ti IIti | 2
iz I
Programming
_ DO NOT OPEN THE DOOR _
The Display Window MUST be blank before programming can begin. lf any indicator light isilluminated in the digital Display Window: Close the door, press STOP/RESET Pad and wait 1minute until the Display Window goes blank.
A. Programming Memory Pads for Single Stage Heating:
Example: To program 30 seconds at Medium Power for Memory Pad Number 5
f-ril;lI PowER I
ETI
L*;
t____i
.Press the PROG. Pad.NOTE:.lf no PROG Indicator appeared in...

.:.:.::::::: ,:,, ... ,,,.,:..r, ..:. 
HOW tOOperate
NOTE: Program the remaining Memory Pads as desired by repeating steps 1-5. You may insert up to 10 memory programs.When the PBOG indicator is blinking, the program can be cancelled and/or the Pad erased by pressing theSTOP/RESET Pad.
B. Programming Memory Pads lor 2 or 3 Stage Heating:
Example; To program for 2 minutes at DEFROST for 2 stage heating using Memory Pad Number 5
Display Window
Pffi!tFl
l_ _r0 |
J,,
ru
-Prc I ? \
tq I[-l
ffi...

Disolay Window
. ,lioc
t-ltl
d=ryc-+-_-r
t] |[-l
1,
=irn
lrI r-t
IZL__
:,oo 1
[-ic-l
PPM I
li I[-l
ru
II
up to l 0 memory
4.
:i i:I :l .::.1. l:::::::::
c. Programming the Double Quantity Pad - For multiple portion heating:
Your oven is factory set to automatically double lhe programmed time for multiple portion heating - this is the correct settingfor heating multiple portions of most small foods items. No further programming of the time is nelessary for these food ilems.The time required to heat...

How to Operate
Other Features
A. To Activate Program Lock:
This procedure Locks the control panel Memory Pads into their programmed heatingtimes and power levels. DO NOT OPEN THE DOOR. The Display Window musl beblank before the Program Lock feature can be activated.
@.Press and hold in the PROG. Pad
until the display showsP and L. (for 6 seconds)
.Program Lock feature is now
activated.
NOTE: Do not press PROG. Pad for longer than 30 seconds continuously, or false failure code may result..ln Program Lock...

How to Operate
Display Window
l------n 
-l
I LJ
[bFrFl
PBMr--)lEr | |
l, L l
r--+q-+=+--rItrI
[_, i
ru
,P462.
I e cg l
___+rr_+____lItrl
l_,1
C. To Read Program List:
Allows you to review all currently programmed Pad Number, heating time and power level for each stage.
1. Open the door.
.While pressing the STOP/RESET Pad,press and hold in the START Pad.The Beep Tone setting will show in theDisplay Window.Example: Stage Indicator 1: Beep tone is ON
Stage Indicator 2: Beep tone is OFF
2 seconds later, the...

How to Operate
D. To Select Beep Tone Options:
The Beep Tone can be set, ON or OFF.
.Press the PROG. Pad.The display will not change.
.Press the Memory Pad 0.
.Repeat pressing of 0 Pad. Select OFF
ol Beep Tone.
Stagelndicatorl=ON
Stagelndicator2=OFF
.Press the PROG. Pad again.
You have completed programming
the beep tone.
.2 seconds later, the Display Window willgo blank.
E. To Read the Cycle Counter:
The oven can display the total number of times the oven has been operated cumulatively.Great for...

Self Diagnostics Failure Gode Explanation
This oven monitors its operalion and displays a Failure Code in the Display Window when a probrem occurs.
What to do when a failure code appears:
-$l.)
CODECAUSEWHAT TO DO
F01.Overcooked food.Temperature of exhaust air too high.
-Press STOP/RESET Pad to stop beep.*Wait for oven to cool down and reset.-lf a flame is present, do not open oven door.lf normal operation does not resume, call the service aoent withinformation of failure code.
F33-34.Defective sensor...

Tech n ieal Specifications
NE-r0s4NE-r024
Power Source120V, 60 Hz, single phase
Reouired Power13.4 n1500w
Output.1000 w
Frequency2,450 MHz
Outer Dimensions
(HxWxD)
12 x201 x14/
306 mm x 5l0 mm x 360 mm
Cavity Dimensions
(HxWxD)
8/,e x 13 x 13
205 mm x 330 mm x 330 mm
Net WeightApproximately 34 lb (15.4 kg)
Shipping WeighlApproximately 39 lbs (17.7 kg)
Timer99 min 99 sec (Digital)
xl 0 Memory Pads
with Double Quantity
(x2) Pad
5 minules Rotary
-lEC 705-88 Test Procedure
Specifications subject to change...

PANASONIC CONSUMER ELECTONIC COMPANY
COMPANY, DIVISION OF MATSUSHITA
ELECTRIC CORPORAT]ON OF AMERICA
One Panasonic Way, 4A-4, Secaucus, NJ 07094 T00036P00AP
(2011348-5377 , Printed in Taiwan