Panasonic Microwave Ovens Ne 1024_ne 1054 Operating Instructions

Panasonic,
Operati ng I nstructions
Commercial Microwave Ovens
Models NE-1054
NB-1024
Before operating this oven, please read these instructions completely. 

TABLE OF CONTENTS
PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE
MlcRowAVE ENERGY............. ........s
IMPOBTANT SAFETY INSTRUCTIONS ...................3
lnstallation and Grounding Instructions ........4
Safety Precautions.,.......... ....................5
How Does the Microwave Work? .........6
Outline Diagram (NE-f024) .......7
How to Operate (NE-f024)... .. .. ... .............7
Outline Diagram (Nn-tOS+; .....,............8
How to Operate (NB-fOSl) ,
Before Operating ......,....9
Heating
A....

Your mtcrowave oven is a cooking devtce and you should Lrse as much care as you use with a stove or any other cooking device
When using this electric appliance, basic safety precautionsshould be followed, including the following:
WA R N I N G-ro reduce the risk of burns, erecrrcshock, fire, injury to persons or exposure to excessivemicrowave energy:
|. Read all instructions before using the appliance.
2. Flead and follow the specific PRECAUTIONS TO AVOTDPOSSIBLE EXPOSURE TO EXCESSIVE MICROWAVEENERGY,...

Examine Your Oven
Unpack oven, remove all packing material, and examine theoven for any damage such as dents, broken door latches orcracks in the door. Notify dealer immediately if oven isdamaged. DO NOT install if oven is damaged.
Remove Protective Plastic Filmlf a plastic film has been wrapped around the oven to protecl
the painted finish from scratching during shipping, pleaseremove this plastic film prior to using lhe oven. (However, allovens do not have plastic film wrapping.)
Placement of Oven1....

-A
Safety Precautions
General Use
1. DO NOT tamper with or make any adjustments or repairs todoor, control panel housing, safety interlock switches or anyother part of the oven. Do NOT remove outer panel fromoven. Repairs should only be done by a qualified serviceperson.
2. DO NOT operate the oven if empty. The microwave energywill reflect continuously throughout the oven causingoverheating, if no food or water is present to absorbenergy. This could damage the oven and result in a risk off ire.
3, lf a...

How Does The Microwave Work?t):::1.)t::l:t:.1:.tt::
Microwaves are a form of high frequency radio waves similarto those used by a radio including AM; FM and CB. They are,however, much shorter than radio waves; approximately fiveinches long. Electricity is converted into microwave energy bythe magnetron tube. From the magnetron tube, microwaveenergy is transmitted and absorbed.
Reflection
Microwaves are reflected by metal just as a ball is bouncedoff a wall. A combination of stationary (interior walls)...

Control Panel
izi1t4 Ilrl
lbJll5ltJ
@
@
@
o
@
@
Timer
Gontrol Panel
Door Safety Lock System
Oven Window
Oven Lamp
Splash GuarcULight Diff user
1 . Make sure unit is plugged into a three-prong grounded 120 Vcircuit.
2. Open the door. PLACE CONTAINER OF FOOD in theoven.
3. CLOSE THE DOOR securely.
4. SET A DESIRED HEATING TIME.> MICROWAVE HEATING BEGINS. Oven light turns on.
5. You may open the door while the oven is operating. Assoon as the door is opened, the safety mechanisms stopmicrowave power and...

::::::;:;:iii;:;:iti::;;
NE-l0s1
Control Panel
(1)
(21
(3)
(4)
(s)
(6)
n
(8)
(e)
(10)
Digital Display Window (see below)
Memory Pads
Power level Selector Pad
PROG. Pad
STOP/RESET Pad
DOUBLE QUANTIW (x 2) Pad
START Pad
Control Panel
Door Safety Lock System
Oven Window with HeaWapor Film(Do Not Remove)
(11) Orrcn Lamp
(12) Splash Guard/Light DifluserIr I{rn I
tr Ilr-t l
tzlL_1
Digital Display
Window Indicator
Locations
A - PROG Indicator
B - DOUBLE QUANTITY (x 2) Heating tndicatorC - Memory Pad Number and...

How to Operate
Before Operating
Make sure the oven is connected to a properly grounded electrical outlet.When the door is closed, the Display Window is still blank. When the door is opened, the Display Window shows 0.
For the detail operation, see the page on each feature.
This oven is preset at the factory for the following:
1. Memory Pads are preset to High Power for the indicated heating times for single stage heating.
1 - 10 sec.
2 - 20 sec.
3 - 30 sec.4 - 45 sec.
5- 1min.
Press
To set the cooking...

Open the door and place food in the oven cavity. Close the door. 0 must be showing ln the Display window.
A. $g1ual Single Stage Heating:This.feature gives the usei maximum tteliuitity to set the oven to desired heating time and power level. ldeal for menus thatrequire various heating requirements.
Example: To heat for 2 minutes at High power
.Press the POWER Level SelectorPad one time.
.Press the Memory Pads 2, 0 and 0.
[email protected] the START Pad.Heating will start.The time in the Display Window willcount...