Home
>
Panasonic
>
Camcorder
>
Panasonic Memory Card Camera Recorder AG-AC160AP, AG-AC160AEJ, AG-AC160AEN Operating Instructions
Panasonic Memory Card Camera Recorder AG-AC160AP, AG-AC160AEJ, AG-AC160AEN Operating Instructions
Here you can view all the pages of manual Panasonic Memory Card Camera Recorder AG-AC160AP, AG-AC160AEJ, AG-AC160AEN Operating Instructions. The Panasonic manuals for Camcorder are available online for free. You can easily download all the documents as PDF.
Page 21
21 Description of parts Before use Left side BARS EVF DTL LCD COUNTER-RESET/TC SET ZEBRACH1 SELECTAUDIOINT(L) INT(R)INPUT1INPUT2INPUT2 CH2 SELECT WFMAUTO MANUCH2AUTO MANUCH1 1 4 8 9 10 5 16 3 6 7 21 24 2526 27 2829 3031 32 22 23 2 17 18 19 20 11 12 13 14 15 35 39 40 38 33 34 36 37 Description of parts 1 Built-in microphone (Page 41 of Vol.2) 2 INPUT1 switch (MIC POWER + 48V) (Page 42 of Vol.2) 3 INPUT2 switch (MIC POWER + 48V) (Page 42 of Vol.2) 4 HANDLE ZOOM switch (Page 17 of Vol.2) 5 Diopter...
Page 22
22 Top and right side 14 15 8 21 3 4 5 6 9 7 11 131210 16 1 VIDEO OUT (TC PRESET IN/OUT) terminal (Page 70 of Vol.2) 2 AUDIO OUT CH1/CH2 terminal (Page 70 of Vol.2) 3 Mode lamp (Page 30) 4 POWER/MODE switch (Page 30) 5 Lock release button (Page 30) 6 START/STOP button (Page 11 of V ol.2) 7 Protective caps 8 Shoulder strap mounting location (Page 28) 9 Zoom lever (handle side) (Page 17 of Vol.2) 10 REC CHECK button (Page 12 of Vol.2) 1 1 Zoom lever (Page 17 of Vol.2) 12 AUD IO...
Page 23
23 Description of parts Front side and rear side 1 2 5 6 3 4 7 8 9 10 11 12 13 14 15 16 18 19 20 21 23 17 22 1 Remote control sensor (front) (Page 29) 2 Natural light sensor (Page 22 of Vol.2) 3 Tally lamp (front) (Page 9 of Vol.2) 4 Built-in speaker (Page 66 of Vol.2) 5 AWB button (Page 20 of Vol.2) 6 Tripod hole (bottom) (Page 18) 7 Viewfinder (Page 5 of Vol.2) 8 Memory card slot cover and OPEN lever (Page 10 of Vol.2) 9 Memory card slot and memory card access lamp (Page 12 of Vol.2) 10...
Page 24
24 Remote control When using the remote control, set the [IR REMOTE] on the [OTHER FUNCTIONS] menu to [ON]. The factory setting is set to [OFF]. (Page 97 of Vol.2) Take note that the following buttons are for functions that cannot be executed on this camera. • button • PHOTO SHOT button ZOOM START/ STOP PHOTO SHOT EXT DISPLAY DATE/TIME VOL PLAY STOP SKIP SKIP MENU ENTER PAUSESEARCH STILL ADV STILL ADVSEARCH 3 4 6 8 1 2 5 7 8 9 10 116 10 12 Remote control usable range (Page 29) 1 EXT DISPLAY button...
Page 25
25 Description of parts Preparation Charging lamp ON: Charging OFF: Charging complete Flashing: See below If the charging lamp is flashing Confirm that there is no dirt, dust, or foreign substances attached to the connectors of the battery or the AC adaptor and ensure that the adaptor has been connected correctly. • If there is dirt, dust, or foreign substances on the connectors, disconnect the power plug from the socket before cleaning. •If the charging lamp continues to flash,...
Page 26
26 Power sources Using the battery Installation 1 Insert the battery until it clicks into place. Removal 1 Turn the POWER/MODE switch (Page 30) , and confirm that the mode lamp is off. 2 Remove the battery while pressing the battery release button. Support the battery with your hand to ensure that it will not fall. Battery release button Mode lamp
Page 27
27 Preparation Using the AC adaptor Installation 1 Connect the DC cord to the AC adaptor. 2 Plug the AC cord into the power outlet. 3 Insert the DC cord’s battery connector until it clicks into place. DC cord’s battery \ connector Example: AG-AC160AP Removal 1 Turn the POWER/MODE switch (Page 30 ), and confirm that the mode lamp is off. 2 Remove the DC cord’s battery connector while pressing the battery release button. 3 Disconnect the AC cord from the power outlet. • The battery cannot be...
Page 28
28 Attaching the shoulder strap It is recommended that you attach the shoulder strap to avoid dropping t\ he camera. 20 mm or longer20 mm or longer Attaching/removing the lens hood Removing the lens hood •Turn the lens hood counterclockwise to remove it. Attaching the lens hood •Attach the lens hood to the camera with the lens hood guide facing up and aligned to the center of the camera. •Turn the lens hood clockwise until it clicks and locks into place. (1) (2) Center of the camera The side with...
Page 29
29 Preparation Fitting the eye cup Attach the eye cup by fitting the eye cup hol der and the ridges of the eye cup together. •Turning the eye cup after attaching it may cause the eye cup holder to come off. If the eye cup holder does come of f, see “Cleaning the viewfinder” (Page 106 of Vol.2) and refit it. Eye cup holder Eye cup Ridges The remote control Inserting the battery 1 Remove the holder while pushing the catch in the direction shown by arrow (1). (1) (2) 2 Insert the battery with the side...
Page 30
30 Turning the camera ON/OFF Turning on the power: Turn the POWER/MODE switch up to the position while pressing the lock release button. The mode lamp lights up in red and the camera goes to recording standby status ( mode). •If the POWER/MODE switch is turned up to the position, the mode lamp will light up in green and the camera goes to mode. (Page 54 of Vol.2) •Every time the switch is turned to the position, the mode will change between mode and mode. Turning off the power: Turn the...