Panasonic Matrix Switcher Wj Sx650 Operating Instructions

81
Function

Stop manual recording[REC STOP]
(Press for 2 seconds or
more.)[SHIFT] + [STOP] Start manual recording [REC] [ZOOM WIDE] + 
[ZOOM TELE]WV-CU950/650:
When a camera is selected,
manual recording is started
for the recorder connected to
the camera.
Displays the search list. [SEARCH]
→Open Search Mode
menu.[INDEX]WV-CU950/650, WV-
CU360C/CJ:
• Every pressing this button
can change search list dis-
play. 
• Refer to p. 73 Operation list
of WV-CU950/650 and WV-
CU360C/CJ for how to oper-
ate the...

82
Playback [PLAY/PAUSE] [PLAY]

• Pause playback [PLAY/PAUSE] [PAUSE]WV-CU950/650, WV-
CU360C/CJ:
When a camera is selected,
the recorded image of cam-
era is played back.
WV-CU950/650, WV-
CU360C/CJ:
During playback, the record-
ed images of cameras are
interchangeably displayed
by:
• Camera selection
• Selects the next/previous
camera.
• Fast-forward Shuttle ring clockwise• [FF]
• Joystick B
• Fast-reverse Shuttle ring counterclockwise• [REW]
• Joystick A
• Skips to the next frame. JogDial clockwise...

–
• Multiscreen display
• Sequential display ON
• Electronic zoom Refer to p. 81 Electronic
zoom.WV-CU360C/CJ
83
Monitor 1 control [RECORDER] + Not availableWV-CU950/650:
• Hold down this button until
the operation end.
• These operations are not
available if the recorder
image cannot be inter-
changeably displayed on
Monitor 1 (Example: While
the SETUP MENU of
recorder is displayed) • Camera selection Refer to p. 74 Camera selec-
tion.–
• Selects the next camera. Refer to p. 74 Selects the next...

84
Menu Flow (WV-CU950/650)
If you press the MENU button without selecting a recorder
If you select a recorder, and then press the MENU button
If you select a recorder, and then press the SEARCH button
: SHIFT + MENU buttons
:  MENU button Keep pressing the SHIFT button.Keep pressing the SHIFT button.
If you enter the menu function number, and then 
press the MENU button, the specified menu will 
appear.
: SHIFT + MENU buttons
: MENU button
If you enter the menu function number, and then 
press the MENU...

85
• Recorder control
When using WV-CU360C/CJ, refer to the operating instruc-
tions of recorder.
• Alarm
Alarm ACK, Alarm Individual Reset, and Alarm Monitor
Reset are not available. (Alarm All Reset is available.) When
controlling Alarm History Display from WV-CU360C/CJ, you
cannot skip to 10 pages forward or backward. (Refer to p.
76.)
• Error message display
When you fail in operations, error messages (Not Avail and
Prohibited) will not be displayed on the LCD (or LED dis-
play).
• Camera control...

86
Connections of Matrix Switchers (WJ-SX650 Series) and a PS·Data
System Controller
By connecting a PS·Data system controller (WV-CU950/650, CONTROLLER NO.: 1) to the DATA ports of the units with Cable
Kit WV-CA48/10K, you can control these units from the system controller. (Refer to p. 35 for details on connections.)
Notes:
•Connect Cable Kit WV-CA48/10K to the DATA 1 port.
•Set the DATA 1 port of each unit to PSD. Setting changes are performed in System – DATA Port of WJ-SX650 Series
Administrator...

87
Glossary
This document uses the following terms. 
Monitor number:Numbers (MON 1 to 32) given to the
MONITOR OUT connectors of Video Output Board 1
and 2 for monitor selection
Logical Camera number (LCN):Numbers set for the CAM-
ERA IN connectors (CAM 1 to 256) of Video Input
Board 1 to 8 for camera selection. As the factory
default, LCN 1 to 256 are given to the CAM 1 to 256 in
numerical order.
Note:LCN setting changes are performed in System –
Logical Camera Number of WJ-SX650 Series
Administrator...

88
Cable compensation is the function to compensate the
attenuation.
Export:Function to save the settings of tour sequence or
group sequence in export files (csv format). This func-
tion is available when using WJ-SX650 Series
Administrator Console. Export is performed separately
for each sequence program. 
Import:Function to read export files (csv format) into WJ-
SX650 Series Administrator Console. 

89
• Check if the power cord is properly inserted into the AC inlet
socket of this unit.
• The cooling fan has a trouble or is deteriorating. That may
cause troubles of the unit. Consult the dealer for replace-
ment.
• Check the connections between the system controller and
the unit.
• Check the specifications of modular cable. When using a
modular cable not supplied to the system controller, apply the
6-conductor type.
Troubleshooting
Check the following before requesting repair.
If a trouble cannot be...

90
• Check the connection between the camera and the unit. If a receiv-
er is being used, check if the power is supplied to the camera.
• Check if the selected camera input channel is not set to
accept video input signals from recorder.  
• Check the level settings or camera access setting.
• When the unit is powered on or a camera is connected, black
bars may be seen on the monitor for several seconds with
images not supporting VD2 (images from recorder or cam-
eras of other manufacturers). To eliminate...