Panasonic LUMIX DMC LC33 User Manual
Here you can view all the pages of manual Panasonic LUMIX DMC LC33 User Manual. The Panasonic manuals for Digital Camera are available online for free. You can easily download all the documents as PDF.
Page 81
![Page 81
Technical use
81
USB DIRECT-PRINT (Single Picture)
[Preparation]
Connect the camera to a printer. (P80)
1Only when DPOF is already set, press
2 to select [SINGLE PICTURE], and
then press the 4/[REVIEW/SET]
button.
When DPOF is not set, this screen is
skipped.
2Press 2/1 to select the picture to be
printed, and then press the
4
/[REVIEW/SET] button.
The message “PLEASE SELECT THE
PICTURE TO PRINT” is displayed for
2 seconds.
3Press 3, and press 2/1 to set the
number of sheets, and then...](http://img.usermanuals.tech/thumb/58/38313/w300_Panasonic_LUMIX_DMC-LC33-80.png "Page 81
Technical use
81
USB DIRECT-PRINT (Single Picture)
[Preparation]
Connect the camera to a printer. (P80)
1Only when DPOF is already set, press
2 to select [SINGLE PICTURE], and
then press the 4/[REVIEW/SET]
button.
When DPOF is not set, this screen is
skipped.
2Press 2/1 to select the picture to be
printed, and then press the
4
/[REVIEW/SET] button.
The message “PLEASE SELECT THE
PICTURE TO PRINT” is displayed for
2 seconds.
3Press 3, and press 2/1 to set the
number of sheets, and then...")
Technical use 81 USB DIRECT-PRINT (Single Picture) [Preparation] Connect the camera to a printer. (P80) 1Only when DPOF is already set, press 2 to select [SINGLE PICTURE], and then press the 4/[REVIEW/SET] button. When DPOF is not set, this screen is skipped. 2Press 2/1 to select the picture to be printed, and then press the 4 /[REVIEW/SET] button. The message “PLEASE SELECT THE PICTURE TO PRINT” is displayed for 2 seconds. 3Press 3, and press 2/1 to set the number of sheets, and then...
Page 82
![Page 82
Technical use
82
USB DIRECT-PRINT (DPOF)
[Preparation]
Connect the camera to a printer. (P80)
Write the print information to the card
(DPOF setting). (P60)
1Press 2/1 to select [DPOF].
Press the [MENU] button, and you can
change the DPOF setting. (P60)
2Press the 4/[REVIEW/SET] button.
The message “PLS CHECK THE
PRINTER START PRINTING ?” is
displayed.
3Press 2 to select [YES], and then
press the 4
/[REVIEW/SET] button.
Printing starts.
Press the [MENU] button, and you can stop...](http://img.usermanuals.tech/thumb/58/38313/w300_Panasonic_LUMIX_DMC-LC33-81.png "Page 82
Technical use
82
USB DIRECT-PRINT (DPOF)
[Preparation]
Connect the camera to a printer. (P80)
Write the print information to the card
(DPOF setting). (P60)
1Press 2/1 to select [DPOF].
Press the [MENU] button, and you can
change the DPOF setting. (P60)
2Press the 4/[REVIEW/SET] button.
The message “PLS CHECK THE
PRINTER START PRINTING ?” is
displayed.
3Press 2 to select [YES], and then
press the 4
/[REVIEW/SET] button.
Printing starts.
Press the [MENU] button, and you can stop...")
Technical use 82 USB DIRECT-PRINT (DPOF) [Preparation] Connect the camera to a printer. (P80) Write the print information to the card (DPOF setting). (P60) 1Press 2/1 to select [DPOF]. Press the [MENU] button, and you can change the DPOF setting. (P60) 2Press the 4/[REVIEW/SET] button. The message “PLS CHECK THE PRINTER START PRINTING ?” is displayed. 3Press 2 to select [YES], and then press the 4 /[REVIEW/SET] button. Printing starts. Press the [MENU] button, and you can stop...
Page 83
![Page 83
Technical use
83
Using the Optional AC Adaptor
If you use an AC adaptor (optional, DMW-AC1), you can use the camera without
worrying about battery discharge.
[Preparation]
Check that the power switch is set to [OFF] and the lens is stored.
1Connect the AC power plug to the AC outlet.
2Open the terminal door.
3Connect the AC adaptor to the DC IN socket.
Do not use the AC adaptor other than the optional one (DMW-AC1).
The camera becomes warm during use, however, this is not a malfunction.
The...](http://img.usermanuals.tech/thumb/58/38313/w300_Panasonic_LUMIX_DMC-LC33-82.png "Page 83
Technical use
83
Using the Optional AC Adaptor
If you use an AC adaptor (optional, DMW-AC1), you can use the camera without
worrying about battery discharge.
[Preparation]
Check that the power switch is set to [OFF] and the lens is stored.
1Connect the AC power plug to the AC outlet.
2Open the terminal door.
3Connect the AC adaptor to the DC IN socket.
Do not use the AC adaptor other than the optional one (DMW-AC1).
The camera becomes warm during use, however, this is not a malfunction.
The...")
Technical use 83 Using the Optional AC Adaptor If you use an AC adaptor (optional, DMW-AC1), you can use the camera without worrying about battery discharge. [Preparation] Check that the power switch is set to [OFF] and the lens is stored. 1Connect the AC power plug to the AC outlet. 2Open the terminal door. 3Connect the AC adaptor to the DC IN socket. Do not use the AC adaptor other than the optional one (DMW-AC1). The camera becomes warm during use, however, this is not a malfunction. The...
Page 84
![Page 84
Technical use
84
After Use
After using the camera and following the
steps below, it is recommended to place it in
the optional soft case for protection.
1Turn the power switch to [OFF]. (P18)
2Eject the card. (P16)
3Remove the batteries.
If you will not be using the camera for a long time, remove the batteries. (When
you insert the batteries again, set the date/time)
2
3
OFF ON1
KC52-PP.book 84 ページ ２００３年３月１３日 木曜日 午後２時２９分](http://img.usermanuals.tech/thumb/58/38313/w300_Panasonic_LUMIX_DMC-LC33-83.png "Page 84
Technical use
84
After Use
After using the camera and following the
steps below, it is recommended to place it in
the optional soft case for protection.
1Turn the power switch to [OFF]. (P18)
2Eject the card. (P16)
3Remove the batteries.
If you will not be using the camera for a long time, remove the batteries. (When
you insert the batteries again, set the date/time)
2
3
OFF ON1
KC52-PP.book 84 ページ ２００３年３月１３日 木曜日 午後２時２９分")
Technical use 84 After Use After using the camera and following the steps below, it is recommended to place it in the optional soft case for protection. 1Turn the power switch to [OFF]. (P18) 2Eject the card. (P16) 3Remove the batteries. If you will not be using the camera for a long time, remove the batteries. (When you insert the batteries again, set the date/time) 2 3 OFF ON1 KC52-PP.book 84 ページ ２００３年３月１３日 木曜日 午後２時２９分
Page 85
Others 85 Others The Menu Items REC mode menu 1W.BALANCE (P48)2PICT.SIZE (P36) 3QUALITY (P37)4SPOT MODE (P43) 5SENSITIVITY (P50)6AUDIO REC. (P35) 7D.ZOOM (P31)8COL.EFFECT (P42) 9PICT.ADJ. (P47) 10MONITOR (P71) 11AUTO REVIEW (P72)12POWER SAVE (P74)13ECONOMY (P75) 14BEEP (P73)15NO.RESET (P76) 16RESET (P77)17CLOCK SET (P24) 18LANGUAGE 1 2 3 4 SELECT SETEXITMENUSELECT SETEXITMENU 2048PICT.SIZEQUALITYSPOT MODE REC1/3 W.BALANCE SETUP 1617 15 13 10 11 REC2/3 AUDIO REC. SENSITIVITY50 100 200 400 SETUP SELECT...
Page 86
Others 86 Simple mode menu For items without number, refer to those with the same name. 19 PICT.MODE (P27) Playback mode menu For items without number, refer to those with the same name. 20 PROTECT (P63)21DPOF PRINT (P60) 22SLIDE SHOW (P64)23AUDIO DUB. (P66)24RESIZE (P67) 25TRIMMING (P68)26FORMAT (P70) 27VIDEO OUT (P78) 19 OFFBEEP ONAUTO REVIEW PICT.MODE CLOCK SET ENLARGE4k6/10k15cm SELECT SET EXITMENU 202122 26 2324 25 27 SETUPPLAY2/2 SELECT SETEXITMENU PLAYSETUP...
Page 87
Others 87 Cautions for Use ª Cautions for Use Keep the digital camera away from magnetized equipment (such as a microwave oven, TV, video game equipment, etc.). If you use the digital camera on or near a TV, images and sounds may be disturbed due to electromagnetic wave radiation. Do not use the digital camera near a cell phone because doing so may cause noise to adversely affect the images and sounds. Recorded data may be damaged, or images may be distorted by strong magnetic fields...
Page 88
Others 88 Do not use benzine, thinner or alcohol for cleaning the digital camera. The camera body may be deformed and the surface finish may peel off. Before cleaning the camera, detach the batteries. Wipe the digital camera with a soft, dry cloth. To remove stubborn stains, wipe with a cloth that is soaked in a detergent diluted with water and afterward finish wiping with a dry cloth. For storing or transporting the digital camera, place it in a bag or case lined with soft pads to...
Page 89
![Page 89
Others
89 ª Condensation
When condensation has taken
place:
Set the power switch to [OFF] and
leave the digital camera in this
condition for about 1 hour. When
the camera becomes close to the
ambient temperature, the fog
disappears naturally.
ª Cautions for Storage
Before storing the digital camera, take
the card out and detach the batteries.
Store all the components in a dry place
with a relatively stable temperature.
(Recommended temperature:
59 oF to 77 oF (15oC to 25oC),
Recommended...](http://img.usermanuals.tech/thumb/58/38313/w300_Panasonic_LUMIX_DMC-LC33-88.png "Page 89
Others
89 ª Condensation
When condensation has taken
place:
Set the power switch to [OFF] and
leave the digital camera in this
condition for about 1 hour. When
the camera becomes close to the
ambient temperature, the fog
disappears naturally.
ª Cautions for Storage
Before storing the digital camera, take
the card out and detach the batteries.
Store all the components in a dry place
with a relatively stable temperature.
(Recommended temperature:
59 oF to 77 oF (15oC to 25oC),
Recommended...")
Others 89 ª Condensation When condensation has taken place: Set the power switch to [OFF] and leave the digital camera in this condition for about 1 hour. When the camera becomes close to the ambient temperature, the fog disappears naturally. ª Cautions for Storage Before storing the digital camera, take the card out and detach the batteries. Store all the components in a dry place with a relatively stable temperature. (Recommended temperature: 59 oF to 77 oF (15oC to 25oC), Recommended...
Page 90
![Page 90
Others
90 ª LCD monitor
LCD monitor In a place with drastic temperature
changes, condensation may form on
the LCD monitor. Wipe it with soft dry
cloth.
If the digital camera is extremely cold
when you turn the power on, the
image on the LCD monitor is slightly
darker than usual at first. However, as
the internal temperature increases, it
goes back to the normal brightness.
ª SD Slide Show
If setting the SD slide show with the [SD
Viewer for DSC] which is in the supplied
CD-ROM, when playing...](http://img.usermanuals.tech/thumb/58/38313/w300_Panasonic_LUMIX_DMC-LC33-89.png "Page 90
Others
90 ª LCD monitor
LCD monitor In a place with drastic temperature
changes, condensation may form on
the LCD monitor. Wipe it with soft dry
cloth.
If the digital camera is extremely cold
when you turn the power on, the
image on the LCD monitor is slightly
darker than usual at first. However, as
the internal temperature increases, it
goes back to the normal brightness.
ª SD Slide Show
If setting the SD slide show with the [SD
Viewer for DSC] which is in the supplied
CD-ROM, when playing...")
Others 90 ª LCD monitor LCD monitor In a place with drastic temperature changes, condensation may form on the LCD monitor. Wipe it with soft dry cloth. If the digital camera is extremely cold when you turn the power on, the image on the LCD monitor is slightly darker than usual at first. However, as the internal temperature increases, it goes back to the normal brightness. ª SD Slide Show If setting the SD slide show with the [SD Viewer for DSC] which is in the supplied CD-ROM, when playing...