Panasonic LUMIX DMC LC33 User Manual

Technical use
71
Adjusting the LCD Monitor Brightness
You can adjust the brightness of the LCD 
monitor.
[Preparation]
 Press the [DISPLAY] button to select the 
display of LCD monitor. (P20)
 Set the mode dial except for [ ]. (P22)
1Press the [MENU] button.
2Press 1 to open the setup menu.
3Press 3/4 to select [MONITOR].
4Press 2/1 to adjust the brightness.
5Press the [MENU] button.
 The menu will disappear.
 In simple mode [ ], LCD monitor 
brightness is fixed to [0].
 Adjusting the LCD monitor...

Technical use
72
Using the Auto Review
Recording with the auto review set to 
[1SEC.]/[3SEC.] the recorded picture is 
automatically displayed on the LCD monitor 
for 1 or 3 seconds.
[Preparation]
 Set the mode dial except for [ ]/[ ]. 
(P22)
1Press the [MENU] button.
2Press 1 to open the setup menu.
3Press 3/4 to select [AUTO REVIEW].
4Press 2/1 to select [1SEC.] or [3SEC.].
5Press the [MENU] button.
 The menu will disappear.
 Even when setting the auto review to [1SEC.]/[3SEC.], it is not available...

Technical use
73
Setting up the Operational Sound
It is possible to set the sound volume when 
the menu operations are done.
1Press the [MENU] button.
2Press 1 to open the setup menu.
 In simple mode, skip this step.
3Press 3/4 to select [BEEP].
4Press 2/1 to adjust the operational 
sound volume.
5Press the [MENU] button.
 The menu will disappear.
 In simple mode [ ], the setting becomes 
[ON] or [OFF].1,5 2,3,4
3,4
SELECT SETEXITMENU
SETUP   2/3REC
RESETCLOCK SET
NO.RESET
BEEP
KC52-PP.book  73 ページ...

Technical use
74
Setting up the Power Save Mode
In this mode, if the camera is not operated for 
a certain amount of time, it is automatically 
turned off.
1Press the [MENU] button.
2Press 1 to open the setup menu.
3Press 3/4 to select [POWER SAVE].
4Press 2/1 to choose the setting time.
[2MIN.]
[5MIN.]
[10MIN.]
 [OFF]: The power is not turned off 
automatically.
5Press the [MENU] button.
 The menu will disappear.
 If you want to cancel the power save mode, turn the power switch to [ON] again...

Technical use
75
Saving the Power Consumption 
(Economy mode)
If the camera is not operated for about 15 
seconds, the LCD monitor display turns off 
and power consumption is saved.
 When setting [ECONOMY] to [ON], the LCD 
monitor display is turned off while charging 
the flash.
 When setting [ECONOMY] to [ON], power 
save setting time is fixed to [2 MIN.].
[Preparation]
 Set the mode dial except for [ ]/[ ]. 
(P22)
1Press the [MENU] button.
2Press 1 to open the setup menu.
3Press 3/4 to select...

Technical use
76
Resetting the File Number
As the file numbers are recorded sequentially 
by the camera, when you use two or more 
cards, it may happen that the file numbers on 
your cards do not start from 0001.
Use this function when you insert a new card 
or perform the new recording on the recorded 
card and you want to start recording from the 
file number 0001.
[Preparation]
 Set the mode dial except for [ ]/[ ]. 
(P22)
1Press the [MENU] button.
2Press 1 to open the setup menu.
3Press 3/4 to...

Technical use
77
Initializing the settings
This feature allows you to easily reset the 
camera to the factory default settings.
[Preparation]
 Set the mode dial except for [ ]/[ ]. 
(P22)
1Press the [MENU] button.
2Press 1 to open the setup menu.
3Press 3/4 to select [RESET] and then 
press 1.
4When this message is displayed 
“RESET REC SETTINGS?”, press 2 to 
select [YES].
5Press the 4/[REVIEW/SET] button.
 The message “REC SETTING RESET 
COMPLETED” is displayed for about 
2 seconds.
6When this...

Technical use
78
Playing Back Images with a TV Monitor
By connecting the camera to a television via the supplied A/V cable 1, it is possible 
to view and play back the recorded images.
[Preparation]
 Turn the camera and the television off.
1Connect the A/V cable 1 to the A/V OUT socket of the camera.
2Connect the A/V cable to the video in and the audio in sockets of the TV.
 Yellow: to the video in socket
 White: to the audio in socket
3Turn the television on and select external input.
4Turn the...

Technical use
79
Connecting to a PC
[Preparation]
 If your PC uses Microsoft Windows® 98 or Windows® 98 Second Edition, a USB 
driver must be installed from the CD that is included. If you are using a newer 
Microsoft operating system such as Windows
® Me, Windows® 2000, or Windows® 
XP (Home Edition/Professional), no USB driver needs to be installed. Your PC 
should recognize the camera automatically.
1Insert the Memory Card into the camera, and turn the power switch to 
[ON].
2Connect the camera to a...

Technical use
80
USB DIRECT-PRINT
By connecting the camera to a printer corresponding to USB DIRECT-PRINT via the 
supplied USB connection cable, it is possible to print directly. 
(Please ask the manufacturer of the printer about the corresponding models)
(Read the printer operating instructions too)
1Insert the Memory Card into the camera, and turn the power switch to 
[ON].
2Turn on the printer.
3Connect the camera to the printer via the supplied USB cable 1.
 When connecting to a printer, use the...