Panasonic Lumix DMC FZ28 User Manual

- 161 -
Advanced (Playback)
You can add the audio after taking a picture.
Select [AUDIO DUB.] on the [PLAYBACK] mode menu. (P29)
Note
Audio dubbing may not work properly on pictures recorded by other equipment.
  [AUDIO DUB.]
Press  2/1 to select the picture and then press 
[MENU/SET] to start audio recording.
The message [OVERWRITE AUDIO DATA?] screen appears 
when audio has already been recorded. Press  3 to select [YES] 
and then press [MENU/SET] to start audio recording. (The 
original audio is...

Advanced (Playback)
- 162 -
You can copy the data of the pictures you have taken from the built-in memory to a card or 
from a card to the built-in memory.
Select [COPY] on the [PLAYBACK] mode menu. (P29)
Press  3/4 to select the copy destination and then 
press [MENU/SET].
Press  2/1 to select the picture and then press [MENU/SET].
Press  3 to select [YES], and then press [MENU/
SET].
If you press [MENU/SET] while copying pictures from the 
built-in memory to the card, the copying will stop halfway.
Do...

- 163 -
Connecting to other equipment
Connecting to other equipmentConnecting to a PC
You can acquire recorded pictures to a PC by connecting the camera and the PC.
You can easily print out or mail the pictures you have imported. Use of the “PHOTOfunSTUDIO-viewer-” bundled software on the CD-ROM (supplied) is a convenient 
way of doing this.
Read the separate operating instructions for the supplied software for more information about 
the software in the CD-ROM (supplied) and how to install it....

Connecting to other equipment
- 164 -
Press 3/4 to select [PC], and then press [MENU/
SET].
If [USB MODE]  (P37) is set to [PC] in the [SETUP] menu in 
advance, the camera will be automat ically connected to the PC 
without displaying the [USB MODE] selection screen. Since 
there is no need to set this each time you connect to the PC, it is 
convenient.
When the camera has been connected to the PC with [USB MODE] set to 
[PictBridge(PTP)], a message may appear on the PC’s screen. Select [Cancel] to close...

- 165 -
Connecting to other equipment
∫Disconnecting the USB connection cable safely
Proceed with the hardware removal using “Safely Remove Hardware” on the task tray of the 
PC. If the icon is not displayed, check that [ACCESS] is not displayed on the LCD monitor of 
the digital camera before removing the hardware.
Note
Turn the camera off before connecting or disconnecting the AC adaptor (optional).Before inserting or removing a card, turn the camera off and disconnect the USB connection 
cable....

Connecting to other equipment
- 166 -
Printing the Pictures
If you connect the camera to a printer supporting PictBridge, you can select the pictures to 
be printed out and instruct that printing be started on the camera’s LCD monitor.
Preparations:
Turn on the camera and the printer.
Remove the card before printing the pictures in the built-in memory.
Perform the print quality and other settings  at the printer before printing the pictures.
Connect the camera to a printer via the USB connection cable  A...

- 167 -
Connecting to other equipment
Note
Do not use any other USB connection cables except the supplied one. Use of cables other than 
the supplied USB connection cable may cause malfunction.
Turn the camera off before connecting or disconnecting the AC adaptor (optional).Before inserting or removing a card, turn the camera off, and disconnect the USB connection 
cable.
You cannot switch between the built-in memory and the card while the camera is connected to 
the printer. Disconnect the USB...

Connecting to other equipment
- 168 -
¢Only when [FAVORITE] is at [ON] and when there are pictures set as favourites.  (P157)
Selecting multiple pictures and printing them
Press  3.
Press  3/4 to select an item and then press [MENU/
SET].
If the print check screen has appeared, select [YES], and print 
the pictures.
ItemDescription of settings
[MULTI SELECT] Multiple pictures are printed at one time.
Press 
3/4/ 2/1 to select the pictures, and then When [DISPLAY] is 
pressed, [é] appears on the pictures...

- 169 -
Connecting to other equipment
Select and set the items both on the screen in step 2 of the 
“Selecting a single picture and printing it ” and in step 3 of the 
“Selecting multiple pictures and printing them ” procedures.

When you want to print pictures in a paper size or a layout which is not 
supported by the camera, set [PAPER SIZE] or [PAGE LAYOUT] to [ {] 
and then set the paper size or the layout on the printer. (For details, 
refer to the operating instructions of the printer.)
When [DPOF...

Connecting to other equipment
- 170 -
Paper sizes not supported by the printer will not be displayed.
[PAPER SIZE]
ItemDescription of settings
{  Settings on the printer are prioritised.
[L/3.5 qk5q]
89 mmk127 mm
[2L/5 qk7q] 127 mmk178 mm
[POSTCARD] 100 mmk148 mm
[16:9] 101.6 mmk180.6 mm
[A4] 210 mmk297 mm
[A3] 297 mmk420 mm
[10 k15cm] 100 mmk150 mm
[4 qk6 q] 101.6 mmk152.4 mm
[8 qk10 q] 203.2 mmk254 mm
[LETTER] 216 mmk279.4 mm
[CARD SIZE] 54 mmk85.6 mm
Downloaded From camera-usermanual.com Panasonic...