Panasonic LUMIX DMC FX580 User Manual

							- 131 -
Advanced (Playback)
DPOF “Digital Print Order Format” is a system that allows the user to select which pictures 
to print, how many copies of each picture to print and whether or not to print the recording 
date on the pictures when using a DPOF compatible photo printer or photo printing store. 
For details, ask at your photo printing store.
When you want to use a photo printing store to print pictures recorded on the built-in 
memory, copy them to a card (P135) and then set the print setting.
Select [PRINT SET] on the [PLAYBACK] mode menu. (P23)
Press 3/4 to set the number of prints, and then press [MENU/SET] 
to set.
•When [MULTI] has been selected, repeat steps 3 and 4 for each picture. (It is not 
possible to use the same setting for a multiple number of pictures.)
Press [‚] to return to the menu screen.
•Press [MENU/SET] to close the menu.
[PRINT SET]
Press 3/4 to select [SINGLE] or [MULTI] and then 
press [MENU/SET].
Select the picture, and then press 
[MENU/SET].
[SINGLE] [MULTI]
Press 2/1 to 
select the picture.Press 3/4/2/1 
to select the 
pictures. 
						

							Advanced (Playback)
- 132 -
∫Cancelling all the [PRINT SET] settings1Select [CANCEL] on the screen shown in step 2 and then press [MENU/SET].2Press 3 to select [YES] and then press [MENU/SET].
3Press [MENU/SET] to close the menu.
•You cannot select [CANCEL] if not even one picture has been set for printing.
∫To print the date
After setting the number of prints, set/cancel printing with the recording date by pressing 
[DISPLAY].
•
When you go to a photo printing store for digital printing, be sure to order the printing of the 
date additionally if required.
•Depending on the photo printing store or the printer, the date may not be printed even if you set 
to print the date. For further information, ask at your photo printing store or refer to the 
operating instructions for the printer.
•The date cannot be printed on pictures stamped with text.
Note
•The number of prints can be set from 0 to 999.•With a printer supporting PictBridge, the date print settings of the printer may take precedence 
so check if this is the case.
•It may not be possible to use the print settings with other equipment. In this case, cancel all the 
settings, and reset the settings.
•If the file is not based on the DCF standard, the print setting cannot be set. 
						

							- 133 -
Advanced (Playback)
You can add the audio after taking a picture.
Select [AUDIO DUB.] on the [PLAYBACK] mode menu. (P23)
Note
•Audio dubbing may not work properly on pictures recorded by other equipment.•Audio dubbing does not work on motion pictures and protected pictures.•Sound from motion pictures or pictures with audio recorded by this camera cannot be played 
back by older models of Panasonic digital camera (LUMIX) launched before July 2008.
[AUDIO DUB.]
Press 2/1 to select the picture and then press 
[MENU/SET] to start audio recording.
•The message [OVERWRITE AUDIO DATA?] screen appears 
when audio has already been recorded. Press 3 to select [YES] 
and then press [MENU/SET] to start audio recording. (The 
original audio is overwritten.)
•Audio is recorded from the built-in microphone on the camera.•If you press [‚], the audio dubbing is cancelled.
Press [MENU/SET] to stop recording.
•It will automatically stop after recording about 10 seconds without 
pressing [MENU/SET].
Press [‚] to return to the menu screen.
•Press [MENU/SET] to close the menu. 
						

							Advanced (Playback)
- 134 -
All the information regarding the [FACE RECOG.] of the selected image will be cleared.
Select [FACE RECOG.] on the [PLAYBACK] mode menu. (P23)
Press 2/1 to select the picture and then press [MENU/SET]
Press 3 to select [YES] and then press [MENU/SET].
Press [‚] to return to the menu screen.
•Press [MENU/SET] to close the menu.
Note
•Cleared information regarding the [FACE RECOG.] cannot be restored.•Images Cleared of [FACE RECOG.] will not be categorized for [FACE RECOG.] for 
[CATEGORY PLAY].
•Clearing of [FACE RECOG.] cannot be done of the protected image.
[FACE RECOG.] 
						

							- 135 -
Advanced (Playback)
You can copy the data of the pictures you have taken from the built-in memory to a card or 
from a card to the built-in memory.
Select [COPY] on the [PLAYBACK] mode menu. (P23)
Press 3/4 to select the copy destination and then 
press [MENU/SET].
Press 2/1 to select the picture and then press [MENU/SET].
Press 3 to select [YES], and then press [MENU/
SET].
•If you press [MENU/SET] while copying pictures from the built-in 
memory to the card, the copying will stop halfway.
•Do not turn the camera off at any point during the copying 
process.
Press [‚] to return to the menu screen.
•Press [MENU/SET] to close the menu.•If you copy from the built-in memory to a card, all the pictures are copied and then the 
screen automatically returns to the playback screen.
Note
•If you copy picture data from the built-in memory to a card which does not have sufficient free 
space, the picture data will only be copied halfway. We recommend using a card which has 
more free space than the built-in memory (about 40 MB). 
•If a picture exists with the same name (folder number/file number) as the picture to be copied in 
the copy destination when [ ] is selected, a new folder is created and the picture is copied. 
If a picture exists with the same name (folder number/file number) as the picture to be copied in 
the copy destination when [ ] is selected, that picture is not copied. (P158)
•It may take time to copy the picture data.•Only pictures recorded with a Panasonic digital camera (LUMIX) will be copied.
(Even if the pictures were recorded with a Panasonic digital camera, you may not be able to 
copy them if they were edited with a PC.)
•Print settings on the original picture data will not be copied. Set the print settings again after 
copying is finished.
[COPY]
: All the picture data in the built-in memory are copied 
onto the card at one time. > step 4.
: One picture at a time is copied from the card to the 
built-in memory. > step 
3. 
						

							Connecting to other equipment
- 136 -
Connecting to other equipmentConnecting to a PC
You can acquire recorded pictures to a PC by connecting the camera and the PC.
•You can easily print out or e-mail the pictures you have imported. Use of the “PHOTOfunSTUDIO” bundled software on the CD-ROM (supplied) is a convenient way of 
doing this.
•Read the separate operating instructions for the supplied software for more information about 
the software in the CD-ROM (supplied) and how to install it.
Preparations:
Turn on the camera and the PC.
Remove the card before using the pictures in the built-in memory.
AUSB connection cable (supplied)•Check the directions of the connectors, and plug them straight in or unplug them straight out. 
(Otherwise the connectors may be bent out of shape which will cause trouble.)
BAlign the marks, and insert.
•Use a battery with sufficient battery power or the AC adaptor (optional) and DC coupler 
(optional). If the remaining battery power becomes low while the camera and the PC are 
communicating, the status indicator blinks and the alarm beeps.
Refer to 
“Disconnecting the USB connection cable safely” (P137) before disconnecting the 
USB connection cable. Otherwise, data may be destroyed.
AV OUT/
DIGITAL 
						

							- 137 -
Connecting to other equipment
Using a drag-and-drop operation, move the pictures you want to 
acquire or the folder storing those pictures to any different folder on 
the PC.
∫Disconnecting the USB connection cable safely
•Proceed with the hardware removal using “Safely Remove Hardware” on the task tray of the 
PC. If the icon is not displayed, check that [ACCESS] is not displayed on the LCD monitor of 
the digital camera before removing the hardware.
Note
•This unit cannot be stood upright when the AC adaptor is connected. When placing it down and 
operating, we recommend placing it on a soft cloth.
•Turn the camera off before connecting or disconnecting the AC adaptor (optional).•Before inserting or removing a card, turn the camera off and disconnect the USB connection 
cable. Otherwise, data may be destroyed.
Connect the camera to a PC via the USB connection cable A 
(supplied).
•Do not use any other USB connection cables except the supplied one.
Use of cables other than the supplied USB connection cable may cause malfunction.
Press 3/4 to select [PC], and then press [MENU/
SET].
•If [USB MODE] (P31) is set to [PC] in the [SETUP] menu in 
advance, the camera will be automatically connected to the PC 
without displaying the [USB MODE] selection screen. Since there 
is no need to set this each time you connect to the PC, it is 
convenient.
•When the camera has been connected to the PC with 
[USB MODE] set to [PictBridge(PTP)], a message may appear 
on the PC’s screen. Select [Cancel] to close the screen, and 
disconnect the camera from the PC. Then set [USB MODE] to 
[PC] again.
Double-click on [Removable Disk] in [My Computer].
•When using a Macintosh, the drive is displayed on the desktop. (“LUMIX”, “NO_NAME” 
or “Untitled” is displayed.)
Double-click [DCIM] folder.
USB MODE
PLEASE SELECT 
THE USB MODE
SELECT
SET
PictBridge(PTP)PC 
						

							Connecting to other equipment
- 138 -
∫Viewing the contents of the built-in memory or card using the PC (folder 
composition)
A new folder is created when pictures are taken in the following situations.
•
After [NO.RESET] (P30) in the [SETUP] menu has been executed•When a card containing a folder with the same folder number has been inserted (Such as when 
pictures were taken using another make of camera)
•When there is a picture with file number 999 inside the folder
∫Connection in the PTP mode (WindowsR XP, Windows VistaR and Mac OS X only)
Set [USB MODE] to [PictBridge(PTP)].
Data can now be read only from the card into the PC.
•
When there are 1000 or more pictures on a card, the pictures may not be imported in the PTP 
mode.
1Folder number
2File number
3JPG: Pictures
MOV: Motion pictures
MISC: DPOF print
Favourite
100_PANA
101_PANA
999_PANA
DCIM
MISC
P1000001.JPG
P1000002.JPG
P1000999.JPG
100_PANA


Built-in memoryCard 
						

							- 139 -
Connecting to other equipment
Printing the Pictures
If you connect the camera to a printer supporting PictBridge, you can select the pictures to 
be printed out and start printing on the camera’s LCD monitor.
Preparations:
Turn on the camera and the printer.
Remove the card before printing the pictures in the built-in memory.
Perform the print quality and other settings at the printer before printing the pictures.
AUSB connection cable (supplied)•Check the directions of the connectors, and plug them straight in or unplug them straight out. 
(Otherwise the connectors may be bent out of shape which will cause trouble.)
BAlign the marks, and insert.
•Use a battery with a sufficient battery power or the AC adaptor (optional) and DC coupler 
(optional). If the remaining battery power becomes low while the camera and the printer are 
connected, the status indicator blinks and the alarm beeps. If this happens during printing, stop 
printing at once. If not printing, disconnect the USB connection cable.
AV OUT/
DIGITAL 
						

							Connecting to other equipment
- 140 -
Note
•This unit cannot be stood upright when the AC adaptor is connected. When placing it down and 
operating, we recommend placing it on a soft cloth.
•Do not use any other USB connection cables except the supplied one.
Use of cables other than the supplied USB connection cable may cause malfunction.
•Turn the camera off before connecting or disconnecting the AC adaptor (optional).•Before inserting or removing a card, turn the camera off, and disconnect the USB connection 
cable.
•You cannot switch between the built-in memory and the card while the camera is connected to 
the printer. Disconnect the USB connection cable, insert (or remove) the card and then connect 
the USB connection cable to the printer again.
Connect the camera to a printer via the USB connection cable A 
(supplied).
•When the camera is connected to the printer, the cable disconnect prohibit icon [å] 
appears. Do not disconnect the USB cable while [å] is displayed.
Press 3/4 to select [PictBridge(PTP)], and then 
press [MENU/SET].
Selecting a single picture and printing it
Press 2/1 to select the picture and then press 
[MENU/SET].
•The message disappears in about 2 seconds.
Press 3 to select [PRINT START] and then press 
[MENU/SET].
•Refer to P142 for the items which can be set before starting to 
print the pictures.
•Press [MENU/SET] to cancel printing halfway.•Disconnect the USB connection cable after printing.
USB MODE
SELECT
SET
PLEASE SELECT 
THE USB MODE
PictBridge(PTP)PC
PictBridge
MULTI PRINT
100-0001100-0001
PLEASE SELECT
THE PICTURE TO PRINT
12
SELECTPRINT
OFF
1
CANCEL
SELECT
SET
PRINT START
PRINT WITH DATE
NUM. OF PRINTS
PAPER SIZE
PAGE LAYOUT SINGLE SELECT