Panasonic LUMIX DMC FX580 User Manual

- 131 -
Advanced (Playback)
DPOF “Digital Print Order Format” is a system that allows the user to select which pictures 
to print, how many copies of each picture to print and whether or not to print the recording 
date on the pictures when using a DPOF compatible photo printer or photo printing store. 
For details, ask at your photo printing store.
When you want to use a photo printing store to print pictures recorded on the built-in 
memory, copy them to a card (P135) and then set the print setting....

Advanced (Playback)
- 132 -
∫Cancelling all the [PRINT SET] settings1Select [CANCEL] on the screen shown in step 2 and then press [MENU/SET].2Press 3 to select [YES] and then press [MENU/SET].
3Press [MENU/SET] to close the menu.
•You cannot select [CANCEL] if not even one picture has been set for printing.
∫To print the date
After setting the number of prints, set/cancel printing with the recording date by pressing 
[DISPLAY].
•
When you go to a photo printing store for digital printing, be sure to...

- 133 -
Advanced (Playback)
You can add the audio after taking a picture.
Select [AUDIO DUB.] on the [PLAYBACK] mode menu. (P23)
Note
•Audio dubbing may not work properly on pictures recorded by other equipment.•Audio dubbing does not work on motion pictures and protected pictures.•Sound from motion pictures or pictures with audio recorded by this camera cannot be played 
back by older models of Panasonic digital camera (LUMIX) launched before July 2008.
[AUDIO DUB.]
Press 2/1 to select the picture and...

Advanced (Playback)
- 134 -
All the information regarding the [FACE RECOG.] of the selected image will be cleared.
Select [FACE RECOG.] on the [PLAYBACK] mode menu. (P23)
Press 2/1 to select the picture and then press [MENU/SET]
Press 3 to select [YES] and then press [MENU/SET].
Press [‚] to return to the menu screen.
•Press [MENU/SET] to close the menu.
Note
•Cleared information regarding the [FACE RECOG.] cannot be restored.•Images Cleared of [FACE RECOG.] will not be categorized for [FACE RECOG.] for...

- 135 -
Advanced (Playback)
You can copy the data of the pictures you have taken from the built-in memory to a card or 
from a card to the built-in memory.
Select [COPY] on the [PLAYBACK] mode menu. (P23)
Press 3/4 to select the copy destination and then 
press [MENU/SET].
Press 2/1 to select the picture and then press [MENU/SET].
Press 3 to select [YES], and then press [MENU/
SET].
•If you press [MENU/SET] while copying pictures from the built-in 
memory to the card, the copying will stop halfway.
•Do...

Connecting to other equipment
- 136 -
Connecting to other equipmentConnecting to a PC
You can acquire recorded pictures to a PC by connecting the camera and the PC.
•You can easily print out or e-mail the pictures you have imported. Use of the “PHOTOfunSTUDIO” bundled software on the CD-ROM (supplied) is a convenient way of 
doing this.
•Read the separate operating instructions for the supplied software for more information about 
the software in the CD-ROM (supplied) and how to install it....

- 137 -
Connecting to other equipment
Using a drag-and-drop operation, move the pictures you want to 
acquire or the folder storing those pictures to any different folder on 
the PC.
∫Disconnecting the USB connection cable safely
•Proceed with the hardware removal using “Safely Remove Hardware” on the task tray of the 
PC. If the icon is not displayed, check that [ACCESS] is not displayed on the LCD monitor of 
the digital camera before removing the hardware.
Note
•This unit cannot be stood upright when...

Connecting to other equipment
- 138 -
∫Viewing the contents of the built-in memory or card using the PC (folder 
composition)
A new folder is created when pictures are taken in the following situations.
•
After [NO.RESET] (P30) in the [SETUP] menu has been executed•When a card containing a folder with the same folder number has been inserted (Such as when 
pictures were taken using another make of camera)
•When there is a picture with file number 999 inside the folder
∫Connection in the PTP mode...

- 139 -
Connecting to other equipment
Printing the Pictures
If you connect the camera to a printer supporting PictBridge, you can select the pictures to 
be printed out and start printing on the camera’s LCD monitor.
Preparations:
Turn on the camera and the printer.
Remove the card before printing the pictures in the built-in memory.
Perform the print quality and other settings at the printer before printing the pictures.
AUSB connection cable (supplied)•Check the directions of the connectors, and plug...

Connecting to other equipment
- 140 -
Note
•This unit cannot be stood upright when the AC adaptor is connected. When placing it down and 
operating, we recommend placing it on a soft cloth.
•Do not use any other USB connection cables except the supplied one.
Use of cables other than the supplied USB connection cable may cause malfunction.
•Turn the camera off before connecting or disconnecting the AC adaptor (optional).•Before inserting or removing a card, turn the camera off, and disconnect the USB...