Panasonic Lumix DMC FX500 User Manual
Have a look at the manual Panasonic Lumix DMC FX500 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
31VQT1Q36 Basic When [‡] is selected, digital red-eye correction (P43) will turn on depending on the type and brightness of the subject, so it will become [ ], [ ], or [ ]. When [ ] or [ ] is set, the flash is activated twice. Only the following functions can be set in this mode. [REC] mode menu –[PICTURE SIZE]¢ (P66)/[ASPECT RATIO] (P67)/[BURST] (P73)/[COLOR EFFECT]¢ (P74)/ [STABILIZER]¢ (P75) ¢The settings which can be selected are different from when other [REC] modes are used. [SETUP] menu –[CLOCK SET]/[WORLD TIME]/[TRAVEL DATE]/[BEEP]/[LANGUAGE]The settings of the following items are fixed. The following functions cannot be used.–[EXPOSURE]/[AUTO BRACKET]/White balance fine adjustment/[DIGITAL ZOOM]/ [PICT.ADJ.]/[MIN. SHTR SPEED]/[AUDIO REC.]/[HISTOGRAM] The other items on the [SETUP] menu can be set in the mode such as the Program AE mode. What is set will be reflected in the Intelligent auto mode. About the flash Settings in Intelligent auto mode ItemSettings [GUIDE LINE] (P24) ([REC. INFO.]: [OFF]) [ECONOMY] ([POWER SAVE]) (P24)[5MIN.] [AUTO REVIEW] (P25)[2SEC.] Focus rangeThe focus range becomes the same as macro mode. [5 cm (0.17 feet) (Wide)/1 m (3.28 feet) (Tele) to ¶ (infinity)] (P45) The maximum close-up distance (the shortest distance at which the subject can be taken) differs depending on the zoom magnification. Self-timer (P46)10 seconds [QUALITY] (P67)A (Set to [›] when picture size is [ ] (0.3M )) [INTELLIGENT ISO] (P67) [WHITE BALANCE] (P68)[AWB] [METERING MODE] (P70) C [AF MODE] (P71)š (Set to [•] when a face cannot be detected) [QUICK AF] (P72)[ON] [I.EXPOSURE] (P73)[ON] [AF ASSIST LAMP] (P76)[ON] ISOMAX800 DMC-FX500P_mst.book 31 ページ 2008年2月25日 月曜日 午後5時54分 Downloaded From camera-usermanual.com Panasonic Manuals
VQT1Q3632 Basic [REC] mode: ³ Taking pictures with your favorite settings (³: Program AE mode) Many more menu items can be set and you can take pictures with greater freedom than when you take pictures in the Intelligent auto mode (P29). ∫To adjust the exposure and take pictures at times when the image appears too dark (P52) ∫ To adjust the colors and take pictures at times when the image appears too red (P68) Slide the [REC]/[PLAYBACK] selector switch to [¦/!], and then press [MODE]. A[MODE] button B[REC]/[PLAYBACK] selector switch Touch [PROGRAM AE].To change the setting while taking pictures, refer to “Using the [REC] Mode Menu” (P66). Aim the AF area at the point you want to focus on. Press the shutter button halfway to focus. The focus range is 50 cm (1.64 feet) (Wide)/1 m (3.28 feet) (Tele) to ¶ (infinity). If pictures are to be taken at an even closer range, refer to “Taking Close-up Pictures” (P45). Press the halfway pressed shutter button fully to take a picture. The access indication lights (P17) red when pictures are being recorded on the built-in memory (or the card). 1 A B 2 3 4 5 DMC-FX500P_mst.book 32 ページ 2008年2月25日 月曜日 午後5時54分 Downloaded From camera-usermanual.com Panasonic Manuals
33VQT1Q36 Basic Aim the AF area at the subject, and then press the shutter button halfway. AFocus indication BAF area (normal) CAF area (when using the digital zoom or when it is dark) DAperture value ¢ EShutter speed¢ FISO sensitivity ¢If correct exposure cannot be achieved, it will be displayed in red. (However, it will not be displayed in red when the flash is used.) 1Aim the AF area at the subject, and then press the shutter button halfway to fix the focus and exposure. 2Press and hold the shutter button halfway while moving the camera as you compose the picture. You can repeatedly retry the actions in step 1 before pressing the shutter button fully. We recommend that you use the face detection function when taking pictures of people. (P71) ∫Subjects and recording conditions which are difficult to focus Fast-moving subjects, extremely bright subjects or subjects without contrastWhen the recordable range display has appeared in redWhen recording subjects through windows or near shiny objectsWhen it is dark or when jitter occursWhen the camera is too close to the subject or when taking a picture of both distant and near subjects When the jitter alert [ ] appears, use [STABILIZER] (P75), a tripod or the self-timer (P46).Shutter speed will be slower particularly in the following cases. Keep the camera still from the moment the shutter button is pressed until the picture appears on the screen. We recommend using a tripod. –Slow sync./Red-eye reduction–In [NIGHT PORTRAIT], [NIGHT SCENERY], [PARTY], [CANDLE LIGHT], [STARRY SKY] or [FIREWORKS] in scene mode (P54) –When the shutter speed is slowed in [MIN. SHTR SPEED] ∫Direction detection function Pictures recorded with the camera held vertically are played back vertically (rotated). (Only when [ROTATE DISP.] (P95) is set to [ON]) Pictures may not be displayed vertically if they were taken with the camera aimed up or down.Motion pictures taken with the camera held vertically are not displayed vertically. Focusing FocusWhen the subject is focusedWhen the subject is not focused Focus indicationOn Blinks AF areaWhite>Green White>Red SoundBeeps 2 times Beeps 4 times When the subject is not in focus (such as when it is not in the center of the composition of the picture you want to take) Preventing jitter (camera shake) DEF B C A 1/1251/125F2.8F2.8ISOISO 100 1001/125 F2.8ISO 1001/1251/125F2.8F2.8ISOISO 100 1001/125 F2.8ISO 100 PP DMC-FX500P_mst.book 33 ページ 2008年2月25日 月曜日 午後5時54分 Downloaded From camera-usermanual.com Panasonic Manuals
VQT1Q3634 Basic [REC] mode: ñ³±´²¿n Taking Pictures with the Zoom You can zoom-in to make people and objects appear closer or zoom-out to record landscapes in wide angle. To make subjects appear even closer [maximum of 8.9k], do not set the picture size to the highest setting for each aspect ratio (X/Y/W). Even higher levels of magnification are possible when [DIGITAL ZOOM] is set to [ON] in [REC] menu. ∫Types of zooms When using the zoom function, an estimate of the focus range will appear in conjunction with the zoom display bar. (Example: 0.5 m (1.64 ft.) –¶ (infinity)) ¢1 The magnification level differs depending on [PICTURE SIZE] and [ASPECT RATIO] setting. ¢2 The on-screen zoom indication may momentarily stop moving when you rotate the zoom lever to the extreme Tele position. You can enter the digital zoom range by continuously rotating the zoom lever to Tele or releasing the zoom lever once and then rotating it to Tele again. Using the Optical Zoom/Using the Extended Optical Zoom (EZ)/Using the Digital Zoom To make subjects appear closer use (Tele) Rotate the zoom lever towards Tele. To make subjects appear further away use (Wide) Rotate the zoom lever towards Wide. FeatureOptical zoomExtended optical zoom (EZ)Digital zoom Maximum magnification5k8.9k ¢1 20k [including optical zoom 5k] 35.6k [including extended optical zoom 8.9k] Picture qualityNo deterioration No deteriorationThe higher the magnification level, the greater the deterioration. Conditions None[PICTURE SIZE] with (P66) is selected.[DIGITAL ZOOM] (P74) on the [REC] menu is set to [ON]. Screen display A [] is displayed.BThe digital zoom range is displayed. The AF area becomes larger when the shutter button is pressed halfway in the digital zoom range ¢2. TWTW A TWTW B DMC-FX500P_mst.book 34 ページ 2008年2月25日 月曜日 午後5時54分 Downloaded From camera-usermanual.com Panasonic Manuals
35VQT1Q36 Basic ∫Extended optical zoom mechanism When you set the picture size to [ ] (3 million pixels), the 10M (10.1 million pixels) CCD area is cropped to the center 3M (3 million pixels) area, allowing a picture with a higher zoom effect. Note The digital zoom cannot be set when õ has been selected.The indicated zoom magnification is an approximation.“EZ” is an abbreviation of “Extended optical Zoom”.The optical zoom is set to Wide (1k) when the camera is turned on.If you use the zoom function after focusing on the subject, focus on the subject again.The lens barrel extends or retracts according to the zoom position. Take care not to interrupt the motion of the lens barrel while the zoom lever is rotated. When using the digital zoom, [STABILIZER] may not be effective.When using the digital zoom, we recommend using a tripod and the self-timer (P46) for taking pictures. DMC-FX500P_mst.book 35 ページ 2008年2月25日 月曜日 午後5時54分 Downloaded From camera-usermanual.com Panasonic Manuals
VQT1Q3636 Basic [PLAYBACK] mode: ¸ Playing back Pictures ([NORMAL PLAY]) ∫Fast forwarding/Fast rewinding Touch and hold [2]/[1] in left and right of the screen during playback. The file number and the picture number only change one by one. To play back the picture release [2]/[1] when the number of the desired picture appears.If you keep touching, the number of pictures forwarded/rewound increases. Slide the [REC]/[PLAYBACK] selector switch A to [(].B[MODE] buttonNormal playback is set automatically in the following cases. –When the mode was switched from the [REC] to [PLAYBACK]. –When the camera was turned on while the [REC]/[PLAYBACK] selector switch was at [(]. Forward or rewind the picture by touching [2]/[1] on the left and right of the screen. AFile number BPicture number CPlay back the previous picture DPlay back the next picture Picture can be forwarded/rewound also by moving 2/1. Speed of picture forwarding/rewinding changes depending on the playback status. 2: Fast rewind 1: Fast forward Using the Touch Zoom Touch the [ ] in the bottom right of the screen. Touch the part to enlarge. 1k>2k>4k>8k>16k Portion that is touched will be enlarged.Picture can be enlarged also by rotating the zoom lever toward [Z] (T). It will return to normal playback by touching [CANCEL]. 1 A B 2 D AB C 1 2 DMC-FX500P_mst.book 36 ページ 2008年2月25日 月曜日 午後5時54分 Downloaded From camera-usermanual.com Panasonic Manuals
37VQT1Q36 Basic Note This camera complies with the DCF standard “Design rule for Camera File system” established by JEITA “Japan Electronics and Information Technology Industries Association” and with Exif “Exchangeable Image File Format”. Files which do not comply with the DCF standard cannot be played back. The more a picture is enlarged, the more its quality deteriorates.The lens barrel retracts about 15 seconds after switching from [REC] mode to [PLAYBACK] mode. If you want to save the enlarged picture, use the trimming function. (P87)Touch zoom function may not work with pictures recorded by other equipment. ∫List of [PLAYBACK] modes Move the position to be displayed by dragging the picture (P12). When you move the position to be displayed, the zoom position indication A appears for about 1 second. Position of the enlarged part can be moved also by touching [3]/[4]/[2]/[1] or moving 3/4/2/1. Picture will return to the original size (1k) by touching [ ].The magnification becomes lower also by rotating the zoom lever towards [L] (W).It will return to normal playback by touching [CANCEL] after setting the magnification to 1. Switching the [PLAYBACK] mode 1 Press [MODE] during playback.2Touch the item to select. ([NORMAL PLAY] (P36) All the pictures are played back. K[SLIDE SHOW] (P77) The pictures are played back in sequence. [EASY ORG.] (P84) Pictures can be edited / deleted by the touch panel. Ü[FAVORITE PLAY] (P83)¢ Your favorite pictures are played back.¢[FAVORITE PLAY] cannot be selected if there is no picture set as [FAVORITE]. [CALENDAR] (P80) Pictures are played back by the date recorded. L[MULTI PLAYBACK] (P79) Multiple pictures are played back on one screen. [CATEGORY PLAY] (P82) The pictures grouped together in categories are played back. [DUAL PLAY] (P81) Playing Back Pictures on the Dual Display 3A k1.0 DMC-FX500P_mst.book 37 ページ 2008年2月25日 月曜日 午後5時54分 Downloaded From camera-usermanual.com Panasonic Manuals
VQT1Q3638 Basic [PLAYBACK] mode: ¸ Deleting Pictures Once deleted, pictures cannot be recovered. Pictures on the built-in memory or the card which are being played back will be deleted. To delete a single picture Select the picture to be deleted, and then press [‚]. A[DISPLAY] button B[‚] button Move 2 to select [YES] and then press [MENU/SET]. To delete multiple pictures (up to 50) or all the pictures Press [‚]. Move 3/4 to select [DELETE MULTI] or [DELETE ALL] and then press [MENU/SET]. [DELETE ALL] > step5. Move 3/4/2/1 to select the picture, and then press [DISPLAY] to set. (Repeat this step.) [ ] appears on the selected pictures. If [DISPLAY] is pressed again, the setting is canceled. Press [MENU/SET]. Move 3 to select [YES] and then press [MENU/SET] to set. 1 B A 2 1 2 3 DISPLAY 4 5 DMC-FX500P_mst.book 38 ページ 2008年2月25日 月曜日 午後5時54分 Downloaded From camera-usermanual.com Panasonic Manuals
39VQT1Q36 Basic ∫When [DELETE ALL] has been selected with the [FAVORITE] (P85) setting The selection screen is displayed again. Select [DELETE ALL] or [ ALL DELETE EXCEPTÜ], move 3 to select [YES] and delete the pictures. Note Do not turn the camera off while deleting (while [‚] is displayed). Use a battery with a sufficient power or the AC adaptor (DMW-AC5PP; optional). If you press [MENU/SET] while deleting pictures using [DELETE MULTI], [DELETE ALL] or [ALL DELETE EXCEPT Ü], the deleting will stop halfway. Depending on the number of pictures to be deleted, it may take some time to delete them.If pictures do not conform to the DCF standard or are protected (P97), they will not be deleted even if [DELETE ALL] or [ALL DELETE EXCEPTÜ] is selected. DMC-FX500P_mst.book 39 ページ 2008年2月25日 月曜日 午後5時54分 Downloaded From camera-usermanual.com Panasonic Manuals
VQT1Q3640 Advanced (Recording pictures) Advanced (Recording pictures)About the LCD Monitor Press [DISPLAY] to change. ALCD monitor B[DISPLAY] button When the menu screen appears, the [DISPLAY] button is not activated. In recording mode In playback mode ¢1 If the [HISTOGRAM] in [SETUP] menu is set to [ON], histogram will be displayed. ¢2 Set the pattern of the guide lines displayed by setting [GUIDE LINE] in [SETUP] menu. You can also set whether or not to have the recording information displayed when the guide lines are displayed. ¢3 If no operation is performed for a certain period of time, the touch icon will disappear. Note In [NIGHT PORTRAIT], [NIGHT SCENERY], [STARRY SKY] and [FIREWORKS] in scene mode, the guide line is gray. (P54) ∫Recording guide line When you align the subject on the horizontal and vertical guide lines or the cross point of these lines, you can take pictures with well-designed composition by viewing the size, the slope and the balance of the subject. CNormal display¢1 DNo display¢3 ENo display (Recording guide line)¢1, 2, 3 FNormal display GDisplay with recording information ¢1 HNo display¢3 A[]:This is used when dividing the entire screen into 3k3 for taking pictures with a well-balanced composition. B[]:This is used when you want to position the subject at the exact center of the screen. A B CDE 99ùù ISOISO 100100AWBAWBISO 100AWB FGH 1/91/91/9100_ 0001100_0001100_ 0001 2months 10days2months 10days2months 10days1ST DAY1ST DAY1ST DAY 1/91/91/9100_ 0001100_0001100_ 0001 10:00 DEC. 1.200810:00 DEC. 1.200810:00 DEC. 1.2008 10:00 DEC. 1.200810:00 DEC. 1.200810:00 DEC. 1.2008F2.8 1/100F2.8 1/100F2.8 1/100 DMC-FX500P_mst.book 40 ページ 2008年2月25日 月曜日 午後5時54分 Downloaded From camera-usermanual.com Panasonic Manuals