Panasonic Lumix DMC FS20 User Manual
Have a look at the manual Panasonic Lumix DMC FS20 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
71VQT1M59 Advanced (Playback) You can play back the pictures you have set as [FAVORITE] (P79) (Only when [FAVORITE] is set to [ON] and there are pictures which have been set to [FAVORITE]). Slide the [REC]/[PLAYBACK] selector switch to [(], and then press [MODE]. Move 3/4 to select [FAVORITE PLAY], and then press [MENU/SET]. Note You can use only [ROTATE], [ROTATE DISP.], [DPOF PRINT] or [PROTECT] in the [PLAYBACK] menu. [PLAYBACK] mode: ¸ Playing Back Motion Pictures Move 2/1 to select a picture with a motion picture icon (such as [ù]), and then move 3 to play back. AThe motion picture recording time BMotion picture icon CMotion picture playback icon After playback starts, the elapsed playback time is displayed on the upper right of the screen. For example, 8 minutes and 30 seconds is displayed as [8m30s]. ∫Operations performed during motion picture playback The cursor displayed during playback is the same as 3/4/2/1. APlay/Pause BStop CFast rewind, Frame-by-frame rewind ¢ DFast forward, Frame-by-frame forward¢ ¢These operations can be performed only in the pause mode. EReduce volume level FIncrease volume level Note The file format that can be played back with this camera is QuickTime Motion JPEG.Please note that the bundled software includes QuickTime to play back motion picture files created with the camera on the PC. Some QuickTime Motion JPEG files recorded by a PC or other equipment may not play back on the camera. [FAVORITE PLAY] 1 2 CBA A CD B FE VQT1M59_ENG.book 71 ページ 2008年1月8日 火曜日 午後5時21分 Downloaded From camera-usermanual.com Panasonic Manuals
VQT1M5972 Advanced (Playback) If you play back motion pictures that have been recorded with other equipment, the picture quality may deteriorate or the pictures may not play back. When using a high capacity card, it is possible that fast rewinding may be slower than usual. [PLAYBACK] mode: ¸ Using the [PLAYBACK] mode menu You can use various functions in playback mode to rotate pictures, set protection for them etc. With [TEXT STAMP], [RESIZE], [TRIMMING] or [ASPECT CONV.], a new edited picture is created. A new picture cannot be created if there is no free space on the built-in memory or the card so we recommend checking that there is free space and then editing the picture. You can display pictures by recording date. Note The recording date of the picture selected in the playback screen becomes the date selected when the calendar screen is first displayed. If there are multiple pictures with the same recording date, the first picture recorded on that day is displayed. You can display the calendar between January 2000 and December 2099.If the date is not set in the camera, the recording date is set as January 1st, 2008.If you take pictures after setting the travel destination in [WORLD TIME], the pictures are displayed by the dates at the travel destination in calendar playback. [CALENDAR] Select [CALENDAR] on the [PLAYBACK] mode menu. (P19) You can also rotate the zoom lever several times towards [L] (W) to display the calendar screen. (P34) Move 3/4/2/1 to select the date to be played back. 3/4: Select the month 2/1: Select the date If there were no pictures recorded during a month, the month is not displayed. Press [MENU/SET] to display the pictures that were recorded on the selected date. Press [‚] to return to the calendar screen. Move 3/4/2/1 to select a picture and then press [MENU/SET]. The picture that was selected will appear. CAL 1 2 3 4 VQT1M59_ENG.book 72 ページ 2008年1月8日 火曜日 午後5時21分 Downloaded From camera-usermanual.com Panasonic Manuals
73VQT1M59 Advanced (Playback) You can add text (comments) to pictures. After text has been registered, it can be included in prints using [TEXT STAMP] (P74). (Only alphabetic characters and symbols can be entered.) Select [TITLE EDIT] on the [PLAYBACK] mode menu. (P19) Move 3/4 to select [SINGLE] or [MULTI] and then press [MENU/SET]. Move 3/4/2/1 to select text and then press [MENU/SET] to register. Press [DISPLAY] to switch text between [A] (capitals), [a] (small case) and [&/1] (special characters and numbers). The cursor at the entry position can be moved to the left with [L], and to the right with [Z]. To enter a blank, move the cursor to [SPACE] or to delete an entered character, move the cursor to [DELETE], and press [MENU/SET]. To stop editing at any time during text entry, press [‚].A maximum of 30 characters can be entered. Move 3/4/2/1 to move the cursor to [EXIT] and then press [MENU/ SET] to end text input. Press [‚] to return to the menu screen. ¢ ¢The menu screen is automatically restored when [MULTI] is selected.Press [MENU/SET] to close the menu. [TITLE EDIT] Select the picture, and then press [MENU/SET] to set. [’] A is displayed for pictures that have already been recorded with text in [BABY1]/[BABY2] (P50) or [PET] (P51) name settings in scene mode or [TITLE EDIT]. [MULTI] setting Press [DISPLAY] to set (repeat), and then press [MENU/SET] to set. The setting is canceled when [DISPLAY] is pressed again. Titles cannot be changed or deleted in [MULTI]. [SINGLE] [MULTI] Move 2/1 to select the picture.Move 3/4/2/1 to select the pictures. 1 2 3 A 4 5 6 VQT1M59_ENG.book 73 ページ 2008年1月8日 火曜日 午後5時21分 Downloaded From camera-usermanual.com Panasonic Manuals
VQT1M5974 Advanced (Playback) ∫Delete the title (for [SINGLE] only) 1In step 4 when [SINGLE] (P73) is selected, delete all the texts, select [EXIT], and press [MENU/SET]. 2Press [‚]. 3Press [MENU/SET] to close the menu. Note Text can be scrolled if all of the registered text does not fit on the screen.The name setting of [BABY1]/[BABY2] or [PET] in scene mode can also be registered by using the operation in steps 4 and following.The name setting of [BABY1]/[BABY2] or [PET] in scene mode and [TITLE EDIT] cannot be registered at the same time. You can print out texts (comments) using the “PHOTOfunSTUDIO-viewer-” bundled software on the CD-ROM (supplied). You can set up to 50 pictures at one time with [MULTI].You cannot use titles edit for pictures taken with other equipment. You can stamp the recording date/time, age, travel date or title onto the recorded pictures. It is suitable for regular size printing. (Pictures with a picture size larger than [ ] will be resized when stamping the date etc. on them.) Select [TEXT STAMP] on the [PLAYBACK] mode menu. (P19) Move 3/4 to select [SINGLE] or [MULTI] and then press [MENU/SET]. Move 3/4/2/1 to select [SHOOTING DATE], [AGE], [TRAVEL DATE] or [TITLE] and then press [MENU/SET] to set each item. [SHOOTING DATE] [TEXT STAMP] Select the picture, and then press [MENU/SET] to set. [‘] A appears on screen if the picture is stamped with text. [MULTI] setting Press [DISPLAY] to set (repeat), and then press [MENU/SET] to set. The setting is canceled when [DISPLAY] is pressed again. [SINGLE] [MULTI] Move 2/1 to select the picture.Move 3/4/2/1 to select the pictures. [W/OTIME]: Stamp the year, month and date. [WITHTIME]: Stamp the year, month, day, hour and minutes. 1 2 3 A 4 VQT1M59_ENG.book 74 ページ 2008年1月8日 火曜日 午後5時21分 Downloaded From camera-usermanual.com Panasonic Manuals
75VQT1M59 Advanced (Playback) [AGE] (P51) If this is set to [ON], [AGE] is stamped on the pictures. [TRAVEL DATE] If this is set to [ON], [TRAVEL DATE] is stamped on the pictures. [TITLE] Text is printed together with the image for pictures that have already been recorded with text in [BABY1]/[BABY2] or [PET] name settings in scene mode or [TITLE EDIT]. Press [MENU/SET]. If you set [TEXT STAMP] for a picture with a picture size larger than [ ], the picture size will become smaller as shown below. The picture becomes slightly rougher. Move 3 to select [YES] and then press [MENU/ SET]. The message [SAVE NEW PICTURES?] appears if the picture was recorded with a picture size [ ] or less. Press [‚] to return to the menu screen.¢ ¢The menu screen is automatically restored when [MULTI] is selected.Press [MENU/SET] to close the menu. Note When you print pictures stamped with text, the date will be printed over the stamped text if you specify printing of the date at the photo shop or on the printer. You can set up to 50 pictures at one time in [MULTI].Depending on the printer being used, some characters may be cut at printing. Check before printing.When text is stamped onto the [ ] pictures, it is difficult to read it.Text and dates cannot be stamped on the pictures taken with other equipment. We recommend resizing to [ ] if you want to attach a picture to an e-mail or use it on a website. Pictures set to the minimum number of pixels for [ASPECT RATIO] cannot be further reduced in size. Select [RESIZE] on the [PLAYBACK] mode menu. (P19) Aspect ratio settingPicture size X > Y > W > Q[RESIZE] Reducing the picture size (number of pixels) Move 3/4 to select [SINGLE] or [MULTI] and then press [MENU/SET]. 5 6 7 1 2 VQT1M59_ENG.book 75 ページ 2008年1月8日 火曜日 午後5時21分 Downloaded From camera-usermanual.com Panasonic Manuals
VQT1M5976 Advanced (Playback) Move 3 to select [YES] and then press [MENU/ SET]. Press [‚] to return to the menu screen. ¢ ¢The menu screen is automatically restored when [MULTI] is selected. Press [MENU/SET] to close the menu. Note You can set up to 50 pictures at one time in [MULTI].The picture quality of the resized picture will deteriorate.It may not be possible to resize pictures recorded with other equipment. You can enlarge and then clip the important part of the recorded picture. Select [TRIMMING] on the [PLAYBACK] mode menu. (P19) Select the picture and size. [SINGLE] setting 1Move 2/1 to select the picture, and then press [MENU/SET]. 2Move 2/1 to select the size¢, and then press [MENU/SET]. ¢Only the sizes to which the pictures can be resized is displayed. [SINGLE] [MULTI] setting 1Move 3/4 to select the size, and then press [MENU/SET]. When [DISPLAY] is pressed, an explanation of resizing is displayed. 2Move 3/4/2/1 to select the picture, and then press [DISPLAY]. Repeat this step for each picture, and press [MENU/SET] to set. [MULTI] [TRIMMING] Move 2/1 to select the picture, and then press [MENU/SET]. 3 4 5 1 2 VQT1M59_ENG.book 76 ページ 2008年1月8日 火曜日 午後5時21分 Downloaded From camera-usermanual.com Panasonic Manuals
77VQT1M59 Advanced (Playback) Press [MENU/SET]. Move 3 to select [YES] and then press [MENU/ SET]. Press [‚] to return to the menu screen. Press [MENU/SET] to close the menu. Note Depending on the cut size, the picture size of the trimmed picture may become smaller than that of the original picture. The picture quality of the trimmed picture will deteriorate.It may not be possible to trim pictures recorded with other equipment. You can convert pictures taken with a [W] aspect ratio to a [Y] or a [X] aspect ratio. Select [ASPECT CONV.] on the [PLAYBACK] mode menu. (P19) Use the zoom lever and move 3/4/2/1 to select the parts to be trimmed. Zoom lever (T): Enlargement Zoom lever (W): Reduction 3/4/2/1: MoveReduction Enlargement () Move the position () ? [ASPECT CONV.] Move 3/4 to select [Y] or [X] and then press [MENU/SET]. 3 4 5 6 1 2 VQT1M59_ENG.book 77 ページ 2008年1月8日 火曜日 午後5時21分 Downloaded From camera-usermanual.com Panasonic Manuals
VQT1M5978 Advanced (Playback) Press [‚] to return to the menu screen. Press [MENU/SET] to close the menu. Note After converting the aspect ratio, the picture size may become larger than that of the original picture.You may not be able to convert pictures taken on other equipment. This mode allows you to automatically display pictures vertically if they were recorded holding the camera vertically or rotate pictures manually in 90o steps. Select [ROTATE] on the [PLAYBACK] mode menu. (P19) The [ROTATE] function is disabled when [ROTATE DISP.] is set to [OFF]. Move 2/1 to select the picture and then press [MENU/SET]. Motion pictures and protected pictures cannot be rotated. Move 3/4 to select the direction to rotate the picture and then press [MENU/SET]. Press [‚] to return to the menu screen. Press [MENU/SET] to close the menu. Move 2/1 to select a picture taken with [W] aspect ratio, and then press [MENU/SET]. Move 2/1 to determine the horizontal position, and press [MENU/SET] to set. Use 3/4 to set the frame position for pictures rotated vertically. Move 3 to select [YES] and then press [MENU/ SET]. N [ROTATE]/M [ROTATE DISP.] Rotate (The picture is rotated manually) : The picture rotates clockwise in steps of 90 o. : The picture rotates counter-clockwise in steps of 90 o. 3 4 5 6 1 2 3 4 VQT1M59_ENG.book 78 ページ 2008年1月8日 火曜日 午後5時21分 Downloaded From camera-usermanual.com Panasonic Manuals
79VQT1M59 Advanced (Playback) Select [ROTATE DISP.] on the [PLAYBACK] mode menu. (P19) Note When you play back pictures on a PC, they cannot be displayed in the rotated direction unless the OS or software is compatible with Exif. Exif is a file format for still pictures which allows recording information etc. to be added. It was established by “JEITA (Japan Electronics and Information Technology Industries Association)”. It may not be possible to rotate pictures that have been recorded with other equipment. You can do the following if a mark has been added to pictures and they have been set as favorites.Play back only the pictures set as favorites. ([FAVORITE PLAY])Play back the pictures set as favorites only as a slide show.Delete all the pictures not set as favorites. ([ALL DELETE EXCEPTÜ]) Select [FAVORITE] on the [PLAYBACK] mode menu. (P19) ∫Canceling all the [FAVORITE] settings1Select [CANCEL] on the screen shown in step 2 and then press [MENU/SET]. 2Move 3 to select [YES] and then press [MENU/SET].3Press [MENU/SET] to close the menu. You cannot select [CANCEL] if not even one picture has been set as a favorite. Rotate display (The picture is automatically rotated and displayed) Move 4 to select [ON] and then press [MENU/SET]. The pictures are displayed without being rotated when you select [OFF]. Refer to P34 for information about how to play back pictures. Press [MENU/SET] to close the menu. Ü [FAVORITE] Move 4 to select [ON] and then press [MENU/SET]. You cannot set pictures as favorites if [FAVORITE] is set to [OFF]. Also [Ü] will not appear when [FAVORITE] is set to [OFF] even if it was previously set to [ON]. Press [MENU/SET] to close the menu. Move 2/1 to select the picture and then press 4. Repeat the above procedure.If 4 is moved again, the favorite setting is canceled. 1 2 3 1 2 3 4 VQT1M59_ENG.book 79 ページ 2008年1月8日 火曜日 午後5時21分 Downloaded From camera-usermanual.com Panasonic Manuals
VQT1M5980 Advanced (Playback) Note You can set up to 999 pictures as favorites.When printing pictures at a photo printing store, [ALL DELETE EXCEPTÜ] (P37) is useful so only the pictures you want to be printed remain on the card. You may not be able to set pictures taken with other equipment as favorites.You can perform, check and cancel the settings of images as favorites using the “PHOTOfunSTUDIO-viewer-” bundled software on the CD-ROM (supplied). DPOF “Digital Print Order Format” is a system that allows the user to select which pictures to print, how many copies of each picture to print and whether or not to print the recording date on the pictures when using a DPOF compatible photo printer or photo printing store. For details, ask at your photo printing store. When you want to use a photo printing store to print pictures recorded on the built-in memory, copy them to a card (P82) and then set the DPOF setting. For more information visit: http://panasonic.jp/dc/dpof_110/white_e.htm Select [DPOF PRINT] on the [PLAYBACK] mode menu. (P19) Move 3/4 to set the number of prints, and then press [MENU/SET] to set. When [MULTI] has been selected, repeat steps 3 and 4 for each picture. (It is not possible to use the same setting for a multiple number of pictures.) Press [‚] to return to the menu screen. Press [MENU/SET] to close the menu. ∫Canceling all the [DPOF PRINT] settings1Select [CANCEL] on the screen shown in step 2 and then press [MENU/SET]. 2Move 3 to select [YES] and then press [MENU/SET].3Press [MENU/SET] to close the menu. O [DPOF PRINT] Move 3/4 to select [SINGLE] or [MULTI] and then press [MENU/SET]. Select the picture, and then press [MENU/SET]. [SINGLE] [MULTI] Move 2/1 to select the picture.Move 3/4/2/1 to select the pictures. 1 2 3 4 5 VQT1M59_ENG.book 80 ページ 2008年1月8日 火曜日 午後5時21分 Downloaded From camera-usermanual.com Panasonic Manuals