Panasonic Lumix DMC FS20 User Manual
Have a look at the manual Panasonic Lumix DMC FS20 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
31VQT1M59 Basic AFocus indication BAF area (normal) CAF area (when using the digital zoom or when it is dark) DAperture value EShutter speed FISO sensitivity 1Aim the AF area at the subject, and then press the shutter button halfway to fix the focus and exposure. 2Press and hold the shutter button halfway while moving the camera as you compose the picture. You can repeatedly retry the actions in step 1 before pressing the shutter button fully. We recommend that you use the face detection function when taking pictures of people. (P63) ∫Subject and recording conditions which are difficult to focus in Fast-moving subjects, extremely bright subjects or subjects without contrastWhen the recordable range display has appeared in redWhen recording subjects through windows or near shiny objectsWhen it is dark or when jitter occursWhen the camera is too close to the subject or when taking a picture of both distant and near subjects When the jitter alert [ ] appears, use [STABILIZER] (P66), a tripod or the self-timer (P44).Shutter speed will be slower particularly in the following cases. Keep the camera still from the moment the shutter button is pressed until the picture appears on the screen. We recommend using a tripod. –In [NIGHT PORTRAIT], [NIGHT SCENERY], [PARTY], [CANDLE LIGHT], [STARRY SKY] or [FIREWORKS] in scene mode (P47) ∫Direction detection function Pictures recorded with the camera held vertically are played back vertically (rotated). (Only when [ROTATE DISP.] (P78) is set to [ON]) Pictures may not be displayed vertically if they were taken with the camera aimed up or down.Motion pictures taken with the camera held vertically are not displayed vertically. When the subject is focusedWhen the subject is not focused Focus indicationOn Blinks AF areaWhite>Green White>Red SoundBeeps 2 times Beeps 4 times When the subject is not in focus (such as when it is not in the center of the composition of the picture you want to take) Preventing jitter (camera shake) A DEFB C 1/1251/125F3.3F3.3ISOISO 100 1001/125 F3.3ISO 1001/1251/125F3.3F3.3ISOISO 100 1001/125 F3.3ISO 100 VQT1M59_ENG.book 31 ページ 2008年1月8日 火曜日 午後5時21分 Downloaded From camera-usermanual.com Panasonic Manuals
VQT1M5932 Basic [REC] mode:ñ·½¾n Taking Pictures with the Zoom You can zoom-in to make people and objects appear closer or zoom-out to record landscapes in wide angle. To make subjects appear even closer (maximum of 7.1k), do not set the picture size to the highest setting for each aspect ratio (X/Y/W). Even higher levels of magnification are possible when [DIGITAL ZOOM] is set to [ON] in [REC] menu. ∫Types of zooms When using the zoom function, an estimate of the focus range will appear in conjunction with the zoom display bar. (Example: 0.5 m (1.64 ft.) –¶) ¢1 The magnification level differs depending on [PICTURE SIZE] and [ASPECT RATIO] setting. ¢2 The on-screen zoom indication may momentarily stop moving when you rotate the zoom lever to the extreme Tele position. You can enter the digital zoom range by continuously rotating the zoom lever to Tele or releasing the zoom lever once and then rotating it to Tele again. Using the Optical Zoom/Using the Extended Optical Zoom (EZ)/Using the Digital Zoom To make subjects appear closer use (Tele) Rotate the zoom lever towards Tele. To make subjects appear further away use (Wide) Rotate the zoom lever towards Wide. FeatureOptical zoomExtended optical zoom (EZ)Digital zoom Maximum magnification4k7.1k ¢116k [including optical zoom 4k] 28.5k [including extended optical zoom 7.1k] Picture qualityNo deterioration No deteriorationThe higher the magnification level, the greater the deterioration. Conditions None[PICTURE SIZE] with (P59) is selected.[DIGITAL ZOOM] (P65) on the [REC] menu is set to [ON]. Screen display A [] is displayed.BThe digital zoom range is displayed. The AF area becomes larger when the shutter button is pressed halfway in the digital zoom range ¢2. TWTW A TWTW B VQT1M59_ENG.book 32 ページ 2008年1月8日 火曜日 午後5時21分 Downloaded From camera-usermanual.com Panasonic Manuals
33VQT1M59 Basic ∫Extended optical zoom mechanism When you set the picture size to [ ] (3 million pixels), the 10M (10.1 million pixels) CCD area is cropped to the center 3M (3 million pixels) area, allowing a picture with a higher zoom effect. Note The digital zoom cannot be set when õ has been selected.The indicated zoom magnification is an approximation.“EZ” is an abbreviation of “Extended optical Zoom”.The optical zoom is set to Wide (1k) when the camera is turned on.If you use the zoom function after focusing on the subject, focus on the subject again.The lens barrel extends or retracts according to the zoom position. Take care not to interrupt the motion of the lens barrel while the zoom lever is rotated. When using the digital zoom, [STABILIZER] may not be effective.When using the digital zoom, we recommend using a tripod and the self-timer (P44) for taking pictures. You can zoom at high speed to Tele (maximum zoom position). The zoom magnification differs depending on the picture size that is set. You can further extend the zoom to the digital zoom range by pressing [E.ZOOM] again when [DIGITAL ZOOM] (P65) is set to [ON]. When the maximum picture size has been set: The zoom stops once at the maximum zoom position of the optical zoom. (1) When [E.ZOOM] is pressed again, zooming proceeds as far as the maximum zoom position of the extended optical zoom. ( 2) The colors of the zoom bars and the picture size change, and the picture size changes temporarily as shown below. ∫To return to Wide using the easy zoom Zooming returns at high speed as far as Wide. Using the Easy zoom Press [E.ZOOM]. AOptical zoom BExtended optical zoom CDigital zoom Aspect ratioPicture size X []>[] Y []>[] W []>[] Press [E.ZOOM] at Tele. A B TW 12 C TW VQT1M59_ENG.book 33 ページ 2008年1月8日 火曜日 午後5時21分 Downloaded From camera-usermanual.com Panasonic Manuals
VQT1M5934 Basic When the zoom position returns to the Wide while the maximum picture size is set, the picture size which was changed in the extended optical zoom range now returns to what it was originally. Also, the picture size returns to what it was originally when the zoom position has been returned to the optical zoom range using the zoom lever. Note Press [E.ZOOM] firmly until the zoom function is activated. [PLAYBACK] mode: ¸ Playing back Pictures ([NORMAL PLAY]) ∫Fast forwarding/Fast rewinding Move and hold 2/1 during playback. The file number A and the picture number B only change one by one. Release 2/1 when the number of the desired picture appears to play back the picture. If you keep moving 2/1, the number of pictures forwarded/rewound increases. Rotate the zoom lever towards [L] (W). 1 screen>12 screens>30 screens>Calendar screen display (P72) ANumber of the selected picture and the total number of recorded pictures Rotate the zoom lever towards [Z] (T) to return to the previous screen. Pictures are not rotated for display. Slide the [REC]/[PLAYBACK] selector switch A to [(]. Normal playback is set automatically in the following cases. –When the mode was switched from the [REC] to [PLAYBACK] –When the camera was turned on while the [REC]/ [PLAYBACK] selector switch was at [(]. Move 2/1 to select the picture. 2: Play back the previous picture 1: Play back the next picture 2: Fast rewind 1: Fast forward Displaying Multiple Screens (Multi Playback) 1 2 AB A VQT1M59_ENG.book 34 ページ 2008年1月8日 火曜日 午後5時21分 Downloaded From camera-usermanual.com Panasonic Manuals
35VQT1M59 Basic ∫To return to normal playback 1Move 3/4/2/1 to select a picture. An icon will be displayed depending on the recorded picture and the settings.2Press [MENU/SET]. The picture that was selected will appear. Note This camera complies with the DCF standard “Design rule for Camera File system” established by JEITA “Japan Electronics and Information Technology Industries Association” and with Exif “Exchangeable Image File Format”. Files which do not comply with the DCF standard cannot be played back. The lens barrel retracts about 15 seconds after switching from [REC] mode to [PLAYBACK] mode. If you want to save the enlarged picture, use the trimming function. (P76)The playback zoom may not operate if pictures have been recorded with other equipment. Using the Playback Zoom Rotate the zoom lever towards [Z] (T). 1k>2k>4k>8k>16k When you rotate the zoom lever towards [L] (W) after enlarging the picture, the magnification becomes lower. When you change the magnification, the zoom position indication A appears for about 1 second, and the position of the enlarged section can be moved by moving 3/4/2/1. The more a picture is enlarged, the more its quality deteriorates. When you move the position to be displayed, the zoom position indication appears for about 1 second.A VQT1M59_ENG.book 35 ページ 2008年1月8日 火曜日 午後5時21分 Downloaded From camera-usermanual.com Panasonic Manuals
VQT1M5936 Basic [PLAYBACK] mode: ¸ Deleting Pictures Once deleted, pictures cannot be recovered. Delete the pictures on the card while the card is inserted in the camera. Switching the [PLAYBACK] mode 1 Press [MODE] during playback.2Move 3/4 to select the item and then press [MENU/SET]. [NORMAL PLAY] (P34) All the pictures are played back. [DUAL PLAY] (P67) Playing Back Pictures on the Dual Display [SLIDE SHOW] (P68) The pictures are played back in sequence. [CATEGORY PLAY] (P70) The pictures grouped together in categories are played back. [FAVORITE PLAY] (P71) ¢ Your favorite pictures are played back.¢ [FAVORITE PLAY] is not displayed when [FAVORITE] has not been set. To delete a single picture Select the picture to be deleted, and then press [‚]. A[DISPLAY] button B[‚] button Move 2 to select [YES] and then press [MENU/SET]. 1 B A 2 VQT1M59_ENG.book 36 ページ 2008年1月8日 火曜日 午後5時21分 Downloaded From camera-usermanual.com Panasonic Manuals
37VQT1M59 Basic ∫When [DELETE ALL] has been selected with the [FAVORITE] (P79) setting The selection screen is displayed again. Select [DELETE ALL] or [ ALL DELETE EXCEPTÜ], move 3 to select [YES] and delete the pictures. ([ALL DELETE EXCEPTÜ] cannot be selected if no pictures have been set as [FAVORITE].) Note Do not turn the camera off while deleting (while [‚] is displayed). Use a battery with a sufficient power or the AC adaptor (DMW-AC5PP; optional). If you press [MENU/SET] while deleting pictures using [DELETE MULTI], [DELETE ALL] or [ALL DELETE EXCEPT Ü], the deleting will stop halfway. Depending on the number of pictures to be deleted, it may take some time to delete them.If pictures do not conform to the DCF standard or are protected (P81), they will not be deleted even if [DELETE ALL] or [ALL DELETE EXCEPTÜ] is selected. To delete multiple pictures (up to 50) or all the pictures Press [‚]. Move 3/4 to select [DELETE MULTI] or [DELETE ALL] and then press [MENU/SET]. [DELETE ALL] > step5. Move 3/4/2/1 to select the picture, and then press [DISPLAY] to set. (Repeat this step.) [ ] appears on the selected pictures. If [DISPLAY] is pressed again, the setting is canceled. Press [MENU/SET]. Move 3 to select [YES] and then press [MENU/SET] to set. 1 2 3 DISPLAY 4 5 VQT1M59_ENG.book 37 ページ 2008年1月8日 火曜日 午後5時21分 Downloaded From camera-usermanual.com Panasonic Manuals
VQT1M5938 Advanced (Recording pictures) Advanced (Recording pictures)About the LCD Monitor Press [DISPLAY] to change. ALCD monitor B[DISPLAY] button When the menu screen appears, the [DISPLAY] button is not activated. During playback zoom (P35), while playing back motion pictures (P71) and during a slide show (P68), you can only select “Normal display F” or “No display H”. In recording mode ¢Set the pattern of the guide lines displayed by setting [GUIDE LINE] in [SETUP] menu. You can also set whether or not to have the recording information displayed when the guide lines are displayed. In playback mode Note In [NIGHT PORTRAIT], [NIGHT SCENERY], [STARRY SKY] and [FIREWORKS] in scene mode, the guide line is gray. (P47) ∫Recording guide line When you align the subject on the horizontal and vertical guide lines or the cross point of these lines, you can take pictures with well-designed composition by viewing the size, the slope and the balance of the subject. CNormal display DNo display ENo display (Recording guide line) ¢ FNormal display GDisplay with recording information HNo display A[]:This is used when dividing the entire screen into 3k3 for taking pictures with a well-balanced composition. B[]:This is used when you want to position the subject at the exact center of the screen. A B 99 CDE ISOISO 100100AWBAWBISO 100AWB FGH 1/61/61/6100_ 0001100_0001100_ 0001 2months 10days2months 10days2months 10days1ST DAY1ST DAY1ST DAY 1/61/61/6100_ 0001100_0001100_ 0001 F3.3 1/30F3.3 1/30F3.3 1/3010:00 DEC. 1.200810:00 DEC. 1.200810:00 DEC. 1.2008 10:00 DEC. 1.200810:00 DEC. 1.200810:00 DEC. 1.2008 VQT1M59_ENG.book 38 ページ 2008年1月8日 火曜日 午後5時21分 Downloaded From camera-usermanual.com Panasonic Manuals
39VQT1M59 Advanced (Recording pictures) [REC] mode: ñ·½¾ Taking Pictures using the Built-in Flash Set the flash to match the recording. Move 1 [‰]. Move 3/4 to select a mode. You can also move 1 [‰] to select.For information about flash settings that can be selected, refer to “Available flash settings by recording mode”. (P40) Press [MENU/SET]. You can also press the shutter button halfway to finish.The menu screen disappears after about 5 seconds. At this time, the selected item is automatically set.APhoto flash Do not cover it with your fingers or other objects. Switching to the appropriate flash setting A 1 2 3 VQT1M59_ENG.book 39 ページ 2008年1月8日 火曜日 午後5時21分 Downloaded From camera-usermanual.com Panasonic Manuals
VQT1M5940 Advanced (Recording pictures) ¢The flash is activated twice. The subject should not move until the second flash is activated. ∫Available flash settings by recording mode The available flash settings depend on the recording mode. (±: Available, —: Not available, ¥: Scene mode initial setting) ¢When [‡] is selected, [ ], [ ] or [ ] is set depending on the type of subject and brightness. The flash setting may change if the recording mode is changed. Set the flash setting again if necessary. ItemDescription of settings ‡: AUTOThe flash is automatically activated when the recording conditions make it necessary. ˆ: AUTO/Red-eye reduction ¢ The flash is automatically activated when the recording conditions make it necessary. It is activated once before the actual recording to reduce the red-eye phenomenon (eyes of the subject appearing red in the picture) and then activated again for the actual recording. Use this when you take pictures of people in low lighting conditions. ‰: Forced flash ON Š: Forced ON/ Red-eye reduction ¢ The flash is activated every time regardless of the recording conditions.Use this when your subject is back-lit or under fluorescent light.The flash setting is set to [Š] only when you set [PARTY] or [CANDLE LIGHT] in scene mode. (P47) ‹: Slow sync./ Red-eye reduction ¢ If you take a picture with a dark background landscape, this feature will slow the shutter speed when the flash is activated so that the dark background landscape will become bright. Simultaneously it reduces the red-eye phenomenon. The flash setting is set to [‹] only when you set [NIGHT PORTRAIT], [PARTY], [CANDLE LIGHT] in scene mode (P47). Œ: Forced flash OFFThe flash is not activated in any recording conditions. Use this when you take pictures in places where the use of the flash is not permitted. ‡ ˆ‰‹ŠŒ‡ˆ‰‹ŠŒ ·±±±——±:±¥±——± ñ±¢————±;±¥±——± *±¥±——±í±—±——¥ +±¥±——±ï—————¥ 0±¥±——±9±—±——¥ ,—————¥ô—————¥ -¥—±——±5—————¥ .———¥—±4—————¥ /—————¥6——¥——± 1±—±——¥8¥—±——± 2———¥±±7—————¥ 3———±±¥n—————± VQT1M59_ENG.book 40 ページ 2008年1月8日 火曜日 午後5時21分 Downloaded From camera-usermanual.com Panasonic Manuals