Panasonic Lumix DMC FH27 User Manual
Have a look at the manual Panasonic Lumix DMC FH27 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
- 101 - Connecting to other equipment Connecting to other equipmentConnecting to a PC You can transfer the pictures in the camera to a PC by connecting the camera and the PC. •Some PCs can read directly from the card removed from the camera. For details, refer to the operating instructions of your PC. •If the computer being used does not support SDXC Memory Cards, a message prompting you to format may appear. (Doing so will cause recorded images to be erased so do not choose to format.) If the card is not recognized, please refer to the below support site. http://panasonic.net/avc/sdcard/information/SDXC.html Preparations: Turn on the camera and the PC. Remove the card before using the pictures in the built-in memory. AUSB connection cable (supplied)•Check the directions of the connectors, and plug them straight in or unplug them straight out. (Otherwise the connectors may be bent out of shape which will cause a malfunction.) B Align the marks, and insert. •Use a battery with sufficient battery power or the AC adaptor (optional) and DC coupler (optional). If the remaining battery power becomes low while the camera and the PC are communicating, the alarm beeps. Refer to “Disconnecting the USB connection cable safely” (P103) before disconnecting the USB connection cable. Otherwise, data may be destroyed. Downloaded From camera-usermanual.com Panasonic Manuals
Connecting to other equipment - 102 - Connect the camera to a PC via the USB connection cable A (supplied). •Do not use any other USB connection cables except the supplied one. Use of cables other than the supplied USB connection cable may cause a malfunction. To u c h [ P C ] . Operate the PC. •You can save the images into the PC by drag and drop the image or the folder with the image you would like to transfer onto the different folder in the PC. Note •Before connecting or disconnecting the AC adaptor (optional), turn the camera off.•Before inserting or removing a card, turn the camera off and disconnect the USB connection cable. Otherwise, data may be destroyed. Downloaded From camera-usermanual.com Panasonic Manuals
- 103 - Connecting to other equipment ∫Viewing the contents of the built-in memory or card using the PC (folder composition) A new folder is created when pictures are taken in the following situations. • When a card containing a folder with the same folder number has been inserted (Such as when pictures were taken using another maker of camera) •When there is a picture with file number 999 inside the folder ∫ Disconnecting the USB connection cable safely •Proceed with the hardware removal using “Safely Remove Hardware” on the task tray of the PC. If the icon is not displayed, check that [Access] is not displayed on the LCD monitor of the digital camera before removing the hardware. ∫ Connection in the PTP Mode (WindowsR XP, Windows VistaR, WindowsR 7 and Mac OS X only) Select [PictBridge(PTP)] when connecting USB cable. • Data can now be read only from the card into the PC.•When there are 1000 or more pictures on a card, the pictures may not be imported in the PTP Mode. For Windows: A drive ([Removable Disk]) is displayed in [My Computer] For Macintosh: A drive ([LUMIX], [NO_NAME] or [Untitled]) is displayed on the desktop DCIM:Images 1 Folder number 2 File number 3 JPG: Still pictures MOV: Motion pictures MISC: DPOF print Favorite AD_LUMIX: For Upload set LUMIXUP.EXE: Upload tool “LUMIX Image Uploader” 100_PANA 101_PANA 999_PANA DCIM MISC P1000001.JPG P1000002.JPG P1000999.JPG 100_PANA Built-in memoryCard AD_LUMIX LUMIXUP.EXE Downloaded From camera-usermanual.com Panasonic Manuals
Connecting to other equipment - 104 - Transferred images can be printed or sent via mail. •Read the separate instructions for the supplied software for more information about the operating environment and how to install it. Still pictures and motion pictures can be uploaded to image sharing sites (Facebook/ YouTube) using the upload tool “LUMIX Image Uploader”. You do not need to transfer the images to the PC or install dedicated software onto the PC, so you can easily upload the images even away from your home or work if there is a PC that is connected to the network. • It is only compatible with a PC with Windows XP/Windows Vista/Windows 7. (View the operating instructions of the “LUMIX Image Uploader” using Internet Explorer) Preparations: Setup the images to upload with [Upload Set] (P90). Connect the PC to the Internet. Create an account at the image sharing site to be used, and prepare the login information. 1Startup the “LUMIXUP.EXE” by double-clicking it. (P103) •An upload tool “LUMIX Image Uploader” may startup automatically if the “PHOTOfunSTUDIO” software on the CD-ROM (supplied) is installed. 2Select the destination to upload. •Operate following the instructions displayed on the PC screen. Note •Operation cannot be guaranteed for future specification changes of the YouTube and Facebook services. Service contents or screen may be modified without notice. (This service is as of November 1st, 2010) •Do not upload any images protected by copyright, unless you own the copyright yourself, or have permission from the relevant copyright holder. Using “PHOTOfunSTUDIO” to copy to a PC Uploading the images to sharing sites Downloaded From camera-usermanual.com Panasonic Manuals
- 105 - Connecting to other equipment Printing the Pictures If you connect the camera to a printer supporting PictBridge, you can select the pictures to be printed out and instruct that printing be started on the camera’s LCD monitor. • Some printers can print directly from the card removed from the camera. For details, refer to the operating instructions of your printer. Preparations: Turn on the camera and the printer. Remove the card before printing the pictures from the built-in memory. Check print quality and other settings on the printer before printing the pictures. AUSB connection cable (supplied)•Check the directions of the connectors, and plug them straight in or unplug them straight out. (Otherwise the connectors may be bent out of shape which will cause a malfunction.) B Align the marks, and insert. •Use a battery with sufficient battery power or the AC adaptor (optional) and DC coupler (optional). If the remaining battery power becomes low while the camera and the printer are connected, the alarm beeps. If this happens during printing, stop printing at once. If not printing, disconnect the USB connection cable. Connect the camera to a printer via the USB connection cable A (supplied). •When the camera is connected to the printer, the cable disconnect prohibit icon [ å] appears. Do not disconnect the USB cable while [ å] is displayed. Touch [PictBridge(PTP)]. Note •Do not use any other USB connection cables except the supplied one. Use of cables other than the supplied USB connection cable may cause malfunction. •Before connecting or disconnecting the AC adaptor (optional), turn the camera off.•Before inserting or removing a card, turn the camera off, and disconnect the USB connection cable. •Motion pictures cannot be printed out. Downloaded From camera-usermanual.com Panasonic Manuals
Connecting to other equipment - 106 - Touch [Multi Print]. To u c h t h e i t e m . •If the print check screen has appeared, select [Yes], and print the pictures. Touch [Print start]. •Refer to P107 for the items which can be set before starting to print the pictures.•Disconnect the USB connecti on cable after printing. Selecting a single picture and printing it Drag the screen horizontally to select an image, and then touch [Print]. Touch [Print start]. •Refer to P107 for the items which can be set before starting to print the pictures. •Disconnect the USB connecti on cable after printing. Selecting multiple pictures and printing them ItemDescription of settings [Multi Select] Multiple pictures are printed at one time. •Select the picture you wish to print. (Touch the same picture again to cancel the selection.) •After the pictures have been selected, touch [Set]. [Select All] Prints all the stored pictures. [Print Set (DPOF)] Prints the pictures set in [Print Set] only. (P97) [Favorite] Prints the pictures set as favorites only. (P96) Multi PrintPrint Downloaded From camera-usermanual.com Panasonic Manuals
- 107 - Connecting to other equipment Select and set the items both on the screen in step 2 of the “Selecting a single picture and printing it” and in step 3 of the “Selecting multiple pictures and printing them” procedures. • When you want to print pictures in a paper size or a layout which is not supported by the camera, set [Paper Size] or [Page Layout] to [ {] and then set the paper size or the layout on the printer. (For details, refer to the operating instructions of the printer.) •When [Print Set (DPOF)] has been selected, the [Print with Date] and [Num.of prints] items are not displayed. •If the printer does not support date printing, the date cannot be printed on the picture.•Depending on the printer, the date print settings of the printer may take precedence so check if this is the case. •When printing images with [Date Stamp] or [Text Stamp], please remember to set Print With Date to [OFF] or the date will print on top. NoteWhen asking the photo shop to print the pictures•By stamping the date using [Date Stamp] (P83) or [Text Stamp] (P92) or setting date printing at the time of the [Print Set] (P97) setting before going to a photo shop, the dates can be printed at the photo shop. You can set the number of prints up to 999. Print Settings [Print with Date] ItemDescription of settings [ON] Date is printed. [OFF] Date is not printed. [Num.of prints] Downloaded From camera-usermanual.com Panasonic Manuals
Connecting to other equipment - 108 - •Paper sizes not supported by the printer will not be displayed. [Paper Size] ItemDescription of settings { Settings on the printer are prioritized. [L/3.5 qk5q] 89 mmk127 mm [2L/5 qk7q] 127 mmk178 mm [POSTCARD] 100 mmk148 mm [16:9] 101.6 mmk180.6 mm [A4] 210 mmk297 mm [A3] 297 mmk420 mm [10 k15cm] 100 mmk150 mm [4 qk6 q] 101.6 mmk152.4 mm [8 qk10 q] 203.2 mmk254 mm [LETTER] 216 mmk279.4 mm [CARD SIZE] 54 mmk85.6 mm Downloaded From camera-usermanual.com Panasonic Manuals
- 109 - Connecting to other equipment •An item cannot be selected if the printer does not support the page layout. ∫Layout printing When printing a picture several times on 1 sheet of paper For example, if you want to print the same picture 4 times on 1 sheet of paper, set [Page Layout] to [ ä] and then set [Num.of prints] to 4 for the picture that you want to print. When printing different pictures on 1 sheet of paper For example, if you want to print 4 different pictures on 1 sheet of paper, set [Page Layout] to [ ä ] and then set [Num.of prints] to 1 for each of the 4 pictures. Note • The camera is receiving an error message from the printer when the [ ¥] indication lights orange during printing. After finishing printing, make sure there are no problems with the printer. •If the number of prints is high, the pictures may be printed several times. In this case, the remaining number of prints indicated may differ from the number set. [Page Layout] (Layouts for printing that can be set with this unit) ItemDescription of settings { Settings on the printer are prioritized. á 1 picture with no frame on 1 page â 1 picture with a frame on 1 page ã 2 pictures on 1 page ä 4 pictures on 1 page Downloaded From camera-usermanual.com Panasonic Manuals
Connecting to other equipment - 110 - [Playback] Mode: ¸ Playing Back Pictures on a TV Screen Preparations: Set the [TV Aspect]. (P38) Turn this unit and the TV off. 1 Yellow: to the video input socket 2 White: to the audio input socket A Align the marks, and insert. B AV cable (supplied) •Check the directions of the connectors, and plug them straight in or unplug them straight out. (Otherwise the connectors may be bent out of shape which will cause a malfunction.) Connect the AV cable (supplied) to the video input and the audio input sockets on the TV. Connect the AV cable to the [AV OUT] socket on the camera. Turn the TV on and select external input. Turn the camera on, and set to the [Playback] Mode. Note •Depending on the [Picture Size], black bands ma y be displayed on the top and bottom or the left and right of the pictures. •Do not use any other AV cables except the supplied one.•Read the operating instructions for the TV.•When you play back a picture vertically, it may be blurry.•You can view pictures on TVs in other countries (regions) which use the NTSC or PAL system when you set [Video Out] in the [Setup] menu. (PAL video out is not available on the version DMC-FH27P sold in the U.S. and the version DMC-FH27PC sold in Canada.) •Change the screen mode on your TV if the picture is displayed with the top or bottom cut off. Playing back pictures using the AV cable (supplied) Downloaded From camera-usermanual.com Panasonic Manuals