Panasonic Lumix DMC FH27 User Manual
Here you can view all the pages of manual Panasonic Lumix DMC FH27 User Manual. The Panasonic manuals for Digital Camera are available online for free. You can easily download all the documents as PDF.
Page 121
- 121 - Others [Please turn camera off and then on again]/[System Error] • This message appears when the camera is not operating properly.> Turn the camera off and on. If the message persists, contact the dealer or your nearest Service Center. [Memory card parameter error]/[This memory card cannot be used] >Use a card compatible with this unit. (P16)–SD Memory Card (8 MB to 2 GB)–SDHC Memory Card (4 GB to 32 GB)–SDXC Memory Card (48 GB, 64 GB) [Insert SD card again]/[Try another card] • An error has...
Page 122
Others - 122 - Troubleshooting First, try out the following procedures (P122–129). • The battery is exhausted. Charge the battery.•If you leave the camera on, the battery will be exhausted. > Turn the camera off frequently by using the [Sleep Mode] etc. (P37) •Is the mode set to [Rec] Mode? (P20)•Is there any memory remaining on the built-in memory or the card? > Delete the pictures which are not necessary to increase the available memory. (P32) •The picture can become whitish if there is dirt e.g....
Page 123
- 123 - Others >The shutter speed becomes slower when pictures are taken in dark places so hold the camera firmly with both hands to take the pictures. (P22) > When taking pictures at a slow shutter speed, use the Self-timer. (P69) •Is the ISO sensitivity high or the shutter speed slow? (ISO sensitivity is set to [ ] when the camera is shipped. Therefore, when taking pictures indoors etc. noise will appear.) > Decrease the ISO sensitivity. (P72) > Set [Color Mode] to [NATURAL]. (P81) > Take...
Page 124
Others - 124 - •This phenomenon appears when you press the shutter button halfway to set the aperture value and does not affect the recorded pictures. •This phenomenon also appears when the brightness changes when the camera is zoomed or when the camera is moved. This is because of operation of the automatic aperture of the camera, and it is not a malfunction. •The LCD monitor may flicker for a few seconds after turning the camera on indoors under fluorescent light. This is not a malfunction. •Is...
Page 125
- 125 - Others •[Rotate Disp.] (P39) is set to [ ] or [ ]. •Is the mode set to [Playback] Mode? (P28)•Is there a picture on the built-in memory or the card? > The pictures on the built-in memory appear when a card is not inserted. The picture data on the card appears when a card is inserted. •Is this a folder or picture which was processed in the PC? If it is, it cannot be played back by this unit. > It is recommended to use the “PHOTOfunSTUDIO” software in the CD-ROM (supplied) to write pictures...
Page 126
Others - 126 - •When Digital Red-Eye Correction ([ ], [ ], [ ]) is in operation, if you take a picture of a subject with red color surrounded by a skin tone color, that red part may be corrected to black by the Digital Red-Eye Correction function. > It is recommend to take picture with Flash Mode set to [ ‡], [‰] or [ Œ], or [Red-Eye Removal] on the [Rec] Mode menu set to [OFF]. (P82) •Is it a picture that has been recorded with other equipment? In such cases, these pictures may be displayed with a...
Page 127
- 127 - Others •Is the camera connected to the TV correctly?> Set the TV input to External Input Mode. •Depending on the TV model, the pictures may be elongated horizontally or vertically or they may be displayed with their edges cut off. •Are you trying to play back the motion pictures by directly inserting the card in the card slot of the TV? > Connect the camera to the TV with the AV cable (supplied) and then play back the pictures on the camera. (P110) > Check [TV Aspect] setting. (P38) •Is the...
Page 128
Others - 128 - •Pictures cannot be printed using a printer which does not support PictBridge.> Select [PictBridge(PTP)] when connecting. (P105) > When using a printer with a Cropping or borderless printing function, cancel this function before printing. (For details, refer to the operating instructions for the printer.) > When you order photo studios to print pictures, ask the photo studio if the 16:9 pictures can be printed. > Touch the [Setup] menu icon [ ] and then select [ ~] to set the desired...
Page 129
- 129 - Others •When using the Extended Optical Zoom or the Intelligent Zoom, the zooming action will stop temporarily. This is not a malfunction. •Is the camera set to Macro Zoom Mode? (P77) Maximum zoom during Macro Zoom Mode is 3 k digital zoom. •When you perform an operation after taking a certain action, the pictures may be recorded in folders with different numbers from th e ones used prior to the operation. •If the battery was inserted or removed without first turning the camera’s power off, the...
Page 130
• SDXC Logo is a trademark of SD-3C, LLC. • QuickTime and the QuickTime logo are trademarks or registered trademarks of Apple Inc., used under license therefrom. • YouTube is a trademark of Google Inc. • This product uses “DynaFont” from DynaComware Corporation. DynaFont is a registered trademark of DynaComware Taiwan Inc. • Other names, company names, and product names printed in these instructions are trademarks or registered trademarks of the companies concerned. Downloaded From...